Plans[Page Too Large for OCR Processing]
[Page Too Large for OCR Processing]
PS2c ►O - ooeq -z1
RECEIVED 10Z2.0 5W Gt¢ ko(
Global Project Values: 360
A i PR 21 2 OD roject Name: Laldron -Suite 380 Standby Hours' 24
- SAF Mm OF TIGA D Project ID: 1072 I Alarm Mins: 5
J epared By: ADAM SWEET I Derating Factor: 1.2
chnolo •'■ VIR8 Date: 4/15/2010 I Voltage Drop Warning
Y Threshold % : ` 1
Security , Automation . fire Alarm Entertainment 10
Panel ID: NAC3B Model: Simplex 4009 IDNet Power Extender Max Circuit Current: 2 Amps
Location: 3RD FLOOR ELEC ROOM I Volts: 24 VDC Max Panel Current: 8 Amps
Ckt.# Circuit Name Current Draw Wire AWG Ohms Per Length(ft) Actual Volts @ %Drop
Standby Alarm & Type 1000 Ft. One -Way Ohms EOL
1 V1 0.000 0.000 #14 Solid 2.52 0.00 20.40 0.00%
r 2 V2 0.000 0.741 #14 Solid 2.52 270 1.36 19.39 4.94`/n
1 3 V3 0.000 0.264 #14 Solid 2.52 185 0.93 _ 20.15 1.21%
• 4 V4 0.000 0.000 #14 Solid 2.52 0.00 20.40 0.00%
Aux 5495(1) Aux Power Out 0.000 0.000 #14 Solid 2.52 0.00 20.40 0.00%
4009 4009 NAC Extender 0.085 0.185 1.005 (Amps) Total Output Power Required _
Total Standby Current (Amps) 0.085 1.190 Total Alarm Current (Amps)
■ Standby Time In Hours 24 0.083 Alarm Time In Minutes / 60 (5 Mins)
Total Standby AH Required 2.040 0.099 Total Alarm AH Required
Total Combined AH Required 2.14
Wire resistances are based upon an ambient temperature of 72 degrees F. Because of
• Multiply By The Derating Factor 1.20 the minimal difference between solid and stranded wire no differential was made.
Minimum Battery AmpHours Required 2.57
. Panel ID: 5495(2) Model: Silent Knight 5495 Power Expander Max Circuit Current: 3 Amps
Location: Volts: 24 VDC Max Panel Current: 6 Amps
-
Current Draw Wire AWG Ohms Per Length(ft) Actual Volts @ n
Ckt.# Circuit Name %Dr p
Standby Alarm & Type 1000 Ft. One -Way Ohms EOL
1 5495(2) Circuit 1 0.000 0.000 #12 Solid 1.59 0.00 20.40 0.00 o
r 2 5495(2) Circuit 2 0.000 0.000 #12 Solid 1.59 0.00 20.40 0.0C '7n
3 5495(2) Circuit 3 0.000 0.000 #14 Solid _ 1.59 0.00 20.40 0.0C 10
4 5495(2) Circuit 4 0.000 0.000 #14 Solid _ 1.59 0.00 20.40 0.0C in
Aux 5495(2) Aux Power Out 0.000 0.000 #14 Solid 1.59 0.00 20.40 0.0C '/n
5495 5495 Power Expander 0.075 0.205 0.000 (Amps) Total Output Power Required s
Total Standby Current (Amps) 0.075 0.205 Total Alarm Current (Amps)
Standby Time In Hours 24 0.083 Alarm Time In Minutes / 60 (5 Mins)
Total Standby AH Required 1.800 0.017 Total Alarm AH Required
Total Combined AH Required 1.82
Wire resistances are based upon an ambient temperature of 72 degrees F. Because of
Multiply By The Derating Factor 1.20 the minimal difference between solid and stranded wire no differential was made.
Minimum Battery AmpHours Required 2.18
Circuit Configuration
Project Information
Project Name: Waldron -Suite 380 Project ID: 1072
Prepared By: ADAM SWEET Date: 4/15/2010
Ckt. Number: 1 Panel ID: NAC3B
Ckt. Name: V1 Max Circuit Current: 2 Amps
Qty Device Current Draw Each Current Draw Total
Standby Alarm Standby Alarm
Unknown 0.000 0.000 0.000 0.000
Unknown 0.000 0.000 0.000 0.000
Unknown 0.000 0.000 0.000 0.000
Unknown 0.000 0.000 0.000 0.000
0.000 0.000
Totals 0.000 0.000
Ckt. Number: 2 Panel ID: NAC3B
Ckt. Name: V2 Max Circuit Current: 2 Amps
Qty Device Current Draw Each Current Draw Total
Standby Alarm Standby Alarm
2 4906-9104 15cd 0.000 0.050 0.000 0.100
1 4906-9130 15cd 0.000 0.057 0.000 0.057
1 4906 -9104 30cd 0.000 0.083 0.000 0.083
3 4906 -9130 75cd 0.000 0.167 0.000 0.501
0.000 0.000
Totals 0.000 0.741
Ckt. Number: 3 Panel ID: NAC3B
Ckt. Name: V3 Max Circuit Current: 2 Amps
Qty Device Current Draw Each Current Draw Total
Standby Alarm Standby Alarm
2 4906-9130 15cd 0.000 0.057 0.000 0.114
3 4906-9104 15cd 0.000 0.050 0.000 0.150
Unused 0.000 0.000 0.000 0.000
Unused 0.000 0.000 0.000 0.000
0.000 0.000
Totals 0.000 0.264
Ckt. Number: 4 Panel ID: NAC3B
Ckt. Name: V4 Max Circuit Current: 3 Amps
Qty Device Current Draw Each Current Draw Total
Standby Alarm Standby Alarm
Unused 0.000 0.000 0.000 0.000
Unused 0.000 0.000 0.000 0.000
Unused 0.000 0.000 0.000 0.000
Unused 0.000 0.000 0.000 0.000
0.000 0.000
Totals 0 .000 0.000
•
® Simplex TrueAlert Multi - Candela Notification Appliances
UL, ULC, CSFM Listed; FM Approved; SmartSyncTM Operation AudibleNisible Notification
MEA (NYC) Acceptance* with Horn and Synchronized Flash, Non - Addressable
Features -
�sur
Audible /visible (AN) notification appliances with
efficient electronic horn and high output xenon ,— =
strobe, available for wall or ceiling mount
• Operation is compatible with ADA requirements (refer
•
to important installation information on page 3) . NW,
• Rugged, high impact, flame retardant thermoplastic_•• --"'
housings are available in red or white with clear lens
FIRE p c FIRE
Operates over a two -wire SmartSync circuit to
provide:
• Horns that are controlled separately from strobes on the FIRE
same two -wire circuit Ml•I•1111I
• "On- until - silenced" and "on- until - reset" operation on
the same two -wire pair � k T I
• SmartSync horn activation of Temporal pattern, March FIRE "*
Time pattern (at 60 BPM), or on continuously
• Strobe appliances on the same circuit operating at a _ / synchronized 1 Hz flash rate
• Class B (Style Y) operation requires connection to a
compatible SmartSync NAC or to SmartSync Control
Module (SCM) 4905 -9938 Wall and Ceiling Mount ANs
• Class A (Style Z) operation when connected to the Descri • tion
4905 -9938 SCM or with 4100U series fire alarm control
panel NACs Multi - Candela TrueAlert ANs with horn and
synchronized strobe provide convenient installation
Wall mount ANs features: to standard electrical boxes. The enclosure designs are
• Wiring terminals are accessible from the front of the both impact and vandal resistant and provide a convenient
housing providing easy access for installation, strobe intensity selection. Since each model can be
inspection, and testing selected for strobe intensity output, on -site model
• Covers are available separately to convert housing color inventory is minimized and changes encountered during
• Available UL listed sound damper for locations construction can be easily accommodated.
requiring attenuation of 5 to 6 dBA (stairwells, small Wall mount A/V housings are a one -piece assembly
rooms, highly reverberant areas, etc.) (including lens) that mounts to a single or double gang, or
Optional adapters and wire guards: 4" square standard electrical box. The cover can be
• Wall mount A/V adapters are available to cover surface quickly removed (a tool is required) and covers are
mounted electrical boxes and to adapt to Simplex available separately for color conversion.
2975 -9145 boxes Ceiling mount ANs install using standard 4" electrical
• UL listed red wire guards are available for wall or boxes. Color choice is determined by model number.
ceiling mount A /Vs
Visible notification appliance (strobe): Strobe Intensity Selection
• 24 VDC xenon strobe; intensity is selectable as 15, 30, During installation, a selection plug at the back of the
75, or 110 candela with visible selection jumper secured housing determines the desired strobe intensity. An
behind strobe housing attached flag with black letters on a highly visible yellow
• UL listed to Standard 1971 background allows the selected intensity to be seen at the
• Regulated circuit design ensures consistent flash output side of the strobe lens.
and provides controlled inrush current * This product has been approved by the California State Fire Marshal (CSFM) pursuant to
Section 13144.1 of the California Health and Safety Code. See CSFM Listing
Audible notification appliance (horn): 7125- 0026:317 for allowable values and /or conditions concerning material presented in this
document. It is subject to re-examination, revision, and possible cancellation. Accepted for
• Low current, 24 VDC electronic horn with harmonically use - City of New York Department of Buildings - MEA35 -93E. Refer to page 2 for listing
rich sound output suitable for either steady or coded status of wire guards. Additional listings may be applicable; contact your local Simplex
operation (Temporal or 60 BPM March Time pattern) product supplier for the latest status. Listings and approvals under Simplex Time Recorder
Co. are the properly of Tyco Safety Products Westminster.
• UL listed to Standard 464 " Simplex multi - candela SmartSync two-wire horn /strobe appliance operation is protected
under one or more of the following U.S. Patent Numbers: 5.559.492: 5,622,427;
5,865,527; 5,886,620; 6,281,789; 6,954,137; 7,005,971; and 7,006,003.
S4906- 0002 -4 12/2007
Strobe Application Selection Smart Sync Two -Wire Control
Proper selection of visible notification is dependent on SmartSync operation mode allows a two -wire circuit to
occupancy, location, local codes, and proper applications provide the ability to activate both the horn and strobe on
of: the National Fire Alarm Code (NFPA 72), ANSI the same NAC and then allow the horn to be silenced
Al 17.1; the appropriate model building code: BOCA, while the strobe remains flashing. The horn operates as
ICBO, or SBCCI; and the application guidelines of the "on- until - silenced" while the strobe operation is
Americans with Disabilities Act (ADA). "on- until- reset."
Synchronized Strobes SmartSync Control Sources
Multiple Strobes. When multiple strobes and their • 4006, 4008, 4100U, and 4010 Fire Alarm Control
reflections can be seen from one location, synchronized Panels (refer to individual product data sheets for more
flashes reduce the probability of photo- sensitive reactions information)
as well as the annoyance and possible distraction of • 4009 IDNet NAC Extender (refer to data sheet
random flashing. The multi - candela strobes of these A /Vs S4009 -0002)
are synchronized by the controlling SmartSync operation • SmartSync Control Module (SCM) 4905 -9938 (refer to
NAC. data sheet S4905 -0003)
Additional SmartSync compatible notification
appliances include separate horns and combination
Product Selection horn /strobe notification appliances.
Multi - Candela A /Vs
Model Mounting Housing Color "FIRE" Lettering Description
4906 -9127 Wall Red White
4906 -9129 White Red Horn with Multi - Candela Strobe; strobe intensity selectable as:
15, 30, 75, or 110 candela; operates with SmartSync two -wire
4906 -9128 Red White control
Ceiling
4906 -9130 White Red
Wall Mount AN Accessories
Model Description Dimensions
4905-9937 Red Surface Mount Adapter Skirt; use to cover 1 -1/2" (38 mm) deep 5 3/8" H x 5 1/4" W x 1 -5/8" D
surface mounted boxes (136 mm x 133 mm x 41 mm)
4905-9940 White depth with strobe = 4 -3/8" (111 mm)
4905 9931 Red Adapter Plate for mounting to Simplex 2975 -9145 box (typically for 8- 5/16" x 5 -3/4" x 0.060" Thick
retrofit, may be mounted vertical or horizontal) (211 mm x 146 mm x 1.5 mm)
2975 -9145 Red Mounting Box, requires Adapter Plate 4905 -9931 7 -7/8" x 5-1/8" x 2 -3/4" D
(200 mm x 130 mm x 70 mm)
Optional Sound Damper; package of 20; field installed adhesive backed
4905 -9838 horn output attenuator; reduces output 5 to 6 dBA 1 -3/4" Diameter (44.5 mm)
NOTE: After Sound Damper installation, measure sound level to ensure with 0.31" (8 mm) sound opening
compliance with applicable code requirements
SmartSync Control Module
Model Description Dimensions
4905 -9938 SmartSync Control Module with Class B or Class A output; mounts in 4" 4" x 4 -1/8° x 1 -1/4" D
(102 mm) square box; refer to data sheet S4905 -0003 for details (102 mm x 105 mm x 32 mm)
Replacement Covers for Wall Mount ANs
Model Description Dimensions
4905 -9994 Red cover with white "FIRE" lettering 5 -1/8" H x 5" W x 1 -1/2" D
4905 -9995 White cover with red "FIRE" lettering (130 mm x 127 mm x 38 mm)
Wire Guards and Ceiling Mount AN Adapter
Model Description Dimensions
4905 9961' Wall mount red wire guard with mounting plate, compatible with semi -flush 6- 1/16" H x 6- 1/16" W x 3 -1/8" D
or surface mounted boxes (154 mm x 154 mm x 79 mm)
4905 -9927` Red Wire Guard for mounting to flush mounted electrical box 8-1/2" x 6-1/8" x 3"
(216 mm x 156 mm x 76 mm)
4905-9928* Ceiling Red Adapter Plate, required to mount guard to surface 9" x 7"
Mount mounted electrical box (229 mm x 178 mm)
4905 -9915 White Surface Mount Adapter Box Extension, use to cover 4 -3/4" x 6 -7/8" x 1 -1/2" deep,
4905 -9916 Red 1 -1/2" deep surface mounted boxes (121 mm x 175 mm x 38 mm)
UL listed by Space Age Electronics Inc.
2 S4906- 0002 -4 12/2007
AN S • ecifications
Wall Mount or Ceiling Mount, Common Specifications
Rated Voltage Range UL Listed Rating Regulated 24 DC; see Note 1 below
ULC Listed Rating 20 VDC to 30 VDC per ULC S526-M878
Flash Rate and Synchronized NAC Loading 1 Hz; with up to 35 synchronized strobes maximum per NAC
Environmental; Temperature and Humidity 32° to 122° F (0° to 50° C); 10% to 93 %, non - condensing at 100° F (38° C)
Connections Terminal blocks for 18 AWG to 12 AWG (0.82 mm to 3.31 mm ; two wires per
terminal for in /out wiring
Horn Output Characteristics 2400 to 3700 Hz sweep, modulated at 120 Hz rate
Horn Output Voltage 16 VDC 24 VDC 33 VDC
Ratings Sound Type (see Note 2) Steady Coded Steady Coded Steady Coded
@ 10 ft (3 m) UL 464 Reverberant Chamber 86 dBA 82 dBA 88 dBA 84 dBA 90 dBA 86 dBA
(see Note 2) Anechoic Chamber 92 dBA 91 dBA 94 dBA 95 dBA 96 dBA 96 dBA
Housing Dimensions (with lens) 5 -1/8" H x 5" W x 2 -3/4" D (130 mm x 127 mm x 70 mm)
Wall Maximum RMS Current Rating per 15 cd 30 cd 75 cd 110 cd
Strobe Setting (see Note 3 below) 75 mA 116 mA 221 mA 285 mA
Mount
Reference RMS Currents 18 VDC 67 mA 103 mA 196 mA 253 mA
at other voltages 24 VDC 50 mA 77 mA 147 mA 190 mA
Housing Dimensions (with lens) 4 -3/4 L" x 6 -7/8" W x 2 -5/8" D (121 mm x 175 mm x 67 mm)
Maximum RMS Current Rating per 15 cd 30 cd 75 cd 110 cd
Ceiling Strobe Setting (see Note 3 below) 86 mA 132 mA 250 mA 320 mA
Mount
Reference RMS Currents 18 VDC 76 mA 117 mA 222 mA 284 mA
at other voltages 24 VDC 57 mA 88 mA 167 mA 213 mA
NOTES:
1. "Regulated 24 DC" refers to the voltage range of 16 to 33 VDC per UL Standard 1971, Signaling Devices for the Hearing Impaired,
changes effective May 1, 2004. This voltage range is the absolute operating range. Operation outside of this range may cause
permanent damage to the appliance. Please note that 16 VDC is the lowest operating voltage that is allowed at the last appliance on the
NAC under worst case conditions.
2. Coded values are typical of the output measured with a Temporal coded or a March Time coded pulse and with a sound level meter
reading on a "fast" setting. Under the same test conditions, coded horn output "peak" sound level readings are typically 4 dBA higher.
- Anechoic horn output ratings are typically more representative of actual installed sound output.
3. Currents are with horn on steady. The maximum RMS current listed is the device nameplate rating. Strobe designs are constant wattage
and the maximum RMS current rating occurs at the lowest allowable operating voltage. (RMS is root mean square and refers to the
effective value of a varying current waveform.)
Installation Reference, Surface or Semi -Flush Mounting
Mounting is compatible with
o
single gang, double gang, and
4" (102 mm) square boxes. I r o r 1 I IMPORTANT! WALL MOUNT
1 -112" (38 mm) deep, by others HEIGHT REFERENCE
Optional 4905 -9838 ��— I ��— — , � —
Sound Damper, field attached I Bottom of lens
to attenuate sound 5 to 6 dBA I, is either even
I with, or slightly -_ ( Electrical
®IVAL4t- ' above bottom box outline
Wring access hole ,— � I - of compatible
c
W il ® boxes _
Wiring terminals for .......561 p d *�_ ll 1
SmartSync operation Y
^• '� Mounting Holes:
4" square (4) NFPA 72 requires 80" (2.03 m)
9"'m°°°` ® 'I Single gang (2) that the entire lens minimum
eiI M I 11 Double an (3) be not less than
g g 80" and not greater
111110ir than 96" above the
• Transparent housing finished floor
and lens assembly
Intensity selection
plug, accessible only
from rear of housing; ir, i .
F [I n E factory setting is 15 cd M
Remova cover Strobe intensity
(tool required) viewing slot
3 S4906- 0002 -4 12/2007
Ceiling Mount A/V and Guard Installation Reference
• Ceiling reference, 4" (102 mm) square box, Optional 4905 -9928 Adapter Plate,
surface mounted box 1 -1/2" (38 mm) minimum depth required for surface mounted electrical box
IIMIIFF
Fou mounting clamps included, two each side
■ ao o
I I _ liiIIi I iI•IiIi
A Ceilin reference,
flush mounted box f !,,,- I ,_,. ,„
AI
__._._._______
Optional 4905- 9915/ -9916 Adapter, ' ,
recommended for surface mounted box — —
Wiring terminals are Optional 4905 -9927
I All)
located behind the housing Red Wire Guard
0--- r J E End View
Strobe intensity viewing slot
Intensity selection plug,
accessible only from rear of lens
housing; factory setting is 15 cd
- Wall Mount Installation Reference; Adapter Plate, Guard, and Adapter Skirt
Surface Mounting Reference
i milimr 2975 -9145 Box with Optional Adapter Skirt
and Optional Wire Guard
MEM= Surface mount conduit and
O box shown for reference
�� 4
I "box (102mmprofile, )squar1 1/2" irmicril square
�/� ■1- 1■1-� -I�I� m"'�+'
I 1 5 II (38 mm) deep _ Ill OM
1 "-' 11111 0 o I =' 49O Guartional
—�i— 1_11
I I Wire d
P + ' A/V `- �jf�
I -� I' ter Plate 4905 -9931 Adap ' I –t Optional Surface Mount Adapter Skirt,
O 4905 -9961 Optional Wire Guard 1 -1/2" deep: 4905 -9937, Red;
(shown here for reference only, 4905 -9940. White (conduit knockouts
4905 -9931 Adapter Plate can be used on other mounting options) are provided on all four sides)
4
• Tyco is a registered trademark of Tyco International Services GMBH and is used under license. Simplex, the Simplex logo, IDNet, TrueAlert, and SmartSync are trademarks of
Tyco international Lid. and its affiliates and are used under license. NFPA 72 and National Fire Alarm ('ode are trademarks of the National Fire Protection Association (NEPA).
® m �' IeQx�[ Tyco Safety Products Westminster • Westminster, MA • 01441 -0001 • USA S4906- 0002 -4 12/2007
r'"^ www .tycosafetyproducts- usa- wm.com
,r 2007 Tyco Safety Products Westminster. All rights reserved All specifications and other information shown were current as of document revision date and are subject to change without notice.