Plans •
i ,..,i ,M — 0
i . -; tqco /Fire & Building
j Products
1
1
• Technical Services: Tel: (800) 381 -9312 / Fax: (800) 791 -5500
ED
Series TY-FRB — 2.8 4.2 5.6 and 8.0 11-facto
Upright, Pendent, and Recessed Pendent Sprinkle 2006
Quick Response, Standard Coverage CITY TIGARD
BUILDING OF DIVISION
general mospheres. Although corrosion resis-
tant coated sprinklers have passed the =
- standard corrosion tests of the appli - dv`
e.��irQpt ® ®n cable a royal a encies, the testin is -t `% : � r�
• not representative of all possible cor- } ,,r7t,-:„, .
The Series TY FRB, 2.8, 4.2, 5.6, and rosive atmospheres. Consequently, it i
•
• 8.0 K- factor, Upright and Pendent is recommended that the end user be I'
Sprinklers described in this data sheet consulted with respect to the suitability 4
are quick P uick res onse standard cover- of these coatings g for any given corro " + ;, r ' -
a e, decorative 3 mm glass bulb
g 9 type live environment. The effects of ambi- .� °f ; �.�;;��
spray sprinklers designed for use in ent temperature, concentration of * ; 2 "
light or ordinary hazard, commercial chemicals, and gas /chemical velocity, r -- ..._ `--'
occupancies such as banks, hotels, should be considered, as a minimum, ' _.„ a. , _
shopping malls, etc. along with the corrosive nature of the ,
The recessed version of the Series chemical to which the sprinklers will be
TY FRB Pendent Sprinkler, where ap- exposed.
licable, is intended for use in areas
P An intermediate level versions of the �"
It uses either a m;y� ?
with a finished ceiling.
9• Series TYFRB Pendent Sprinklers are ,. -- --
two -piece Style 10 (1/2 inch NPT) or detailed in Technical Data Sheet . f' } , i *,
Style 40 (3/4 inch NPT) Recessed Es- TFP356, and Sprinkler Guards are de I
cutcheon with 1/2 inch (12,7 mm) of tailed in Technical Data Sheet TFP780 ` t
recessed adjustment or up to 3/4 inch ,'t �'
(19,1 mm) of total adjustment from the WARNINGS " ` ` t, i
flush pendent position, or a two -piece The Series TY -FRB Sprinklers de
Style 20 (1/2 inch NPT) or Style 30 (3/4 scribed herein must be installed and ; « VY, 1 .
inch NPT) Recessed Escutcheon with maintained in compliance with this
•
1/4 inch (6,4 mm) of recessed adjust- document, as well as with the applica- '
ment or up to 1/2 inch (12,7 mm) of ble standards of the National Fire Pro TY3231 - Pendent 5.6K, 1/2 "NPT
total adjustment from the flush pen- tection Association, in addition to the
dent position. The adjustment provided standards of any other authorities hay- TY4131 - Upright 8 0K, 3/4 "NPT
by the Recessed Escutcheon reduces ing jurisdiction. Failure to do so may TY4231 - Pendent 8.0K, 3/4 "NPT
the accuracy to which the fixed pipe impair the performance of these de-
drops to the sprinklers must be cut. vices. Technical
Corrosion resistant coatings, where The owner is responsible for maintain- Data
applicable, are utilized to extend the ing their fire protection system and de-
life of copper alloy sprinklers beyond vices in proper operating condition.
- that which would otherwise be ob- The installing contractor or sprinkler Approvals
tained when exposed to corrosive at- manufacturer should be contacted UL and C -UL Listed.
with any questions. FM, LPCB, and NYC Approved.
(Refer to Table A for complete approval
IMPORTANT information including corrosion resis-
Always refer to Technical Data tant status.)
Sheet TFP700 for the "INSTALLER Model/Sprinkler Maximum Working Pressure
WARNING" that es'cautions Identification 175 psi (12,1 bar)
with respect to handling and instal-
lation of sprinkler systems and corn- Discharge Coefficient -
ponents. Improper handling and in- Numbers K = 2.8 GPM /psi / (40,3 LPM/barl/
stallation can permanently damage K = 4.2 GPM /psis / (60,5 LPM/bar
a sprinkler system or its compo- TY1131 - Upright 2.8K, 1/2 "NPT K = 5.6 GPM /psil/ (80,6 LPM/bar /
vents and cause the sprinkler to fail TY1231 - Pendent 2.8K, 1/2 "NPT K = 8.0 GPM /psi (115,2 LPM /bar
to operate in a fire situation or cause TY2131 - Upright 4.2K, 1/2 "NPT Tem erature Ratin
it to operate prematurely. TY2231 - Pendent 4.2K, 1/2 "NPT P gs
TY3131 - Upright 5.6K,1/2 "NPT Refer to Table A and B
Page 1 of 8 JULY, 2004 47P171
•
Page 2 of 8 TFP171
ESCUTCHEON 7/16" (11,1 mm) STYLE 10 or 20
PLATE SEATING .* NOMINAL RECESSED SSU*
• SURFACE NPT MAKE -IN ESCUTCHEON DEFLECTOR
t MI1111
f era 7/16" J
5
2 -1/4" (57,2 mm) 10111 �� (1 mm) 4
jam` lr NOMINAL MAKE IN 2
1 9 / 16 " I re a ' WRENCH L 2- 3/16" ` � 3
(39,7 mm) I
i ii
F LAT _ (55,6 mm)
7
• SSP DEFLECTOR * f- 2 -7/8" (73,0 mm) DIA. - - 1/2" NPT ** 1
PENDENT RECESSED PENDENT UPRIGHT CROSS SECTION
1 - Frame 3 - Sealing 4 - Bulb 6 - Deflector * Temperature rating is indicated on deflector or adjacent to
2 - Button Assembly 5 - Compression 7 - Bushing orifice seat on frame.
Screw ** Pipe thread connections per ISO 7/1 can be provided on
special request.
FIGURE 1
QUICK RESPONSE SERIES TY -FRB UPRIGHT (TY1131) AND PENDENT (TY1231) SPRINKLERS
2.8 K- FACTOR, 1/2 INCH NPT
ESCUTCHEON 7/16" (11,1 mm) STYLE 10 or20
PLATE SEATING ** NOMINAL RECESSED
SURFACE NPT MAKE -IN ESCUTCHEON SSU*
DEFLECTOR
6*
1 \- — E ----- -- ---------_ _ _ _ _ _ _ _ _ 2- 3/16" } j��l' 7/16"
(55,6 mm) A =� �, I (11 ,1 mm) I i
� �� ■NOMINAL 4
It
MAKE IN IN r
1 -1l2" ��I I 2-3/16„ Y - '' ' � 0 2
(38,1 mm) WRENCH t (55,6 mm) 9
_- ----. . - --• FLATS ' 3
SSP DEFLECTOR * 2 -7/8" (73,0 mm) DIA. 1/2" NPT ** I
PENDENT RECESSED PENDENT UPRIGHT CROSS SECTION
1 - Frame 3 - Sealing 4 - Bulb 6 - Deflector * Temperature rating.is indicated on deflector or adjacent to
2 - Button Assembly 5 - Compression orifice seat on frame.
Screw
** Pipe thread connections per ISO 7/1 can be provided on
special request.
FIGURE 2
QUICK RESPONSE SERIES TY-FRB UPRIGHT (TY2131) AND PENDENT (TY2231) SPRINKLERS
4.2 K- FACTOR, 1/2 INCH NPT
. Y
Finishes Bulb Glass 1
Sprinkler: Refer to Table A and B Compression Screw Bronze Operation
Recessed Escutcheon: White Coated, Deflector . . Copper /Bronze 1
Chrome Plated, or Brass Plated Bushing (K =2.8) Bronze The glass Bulb contains a fluid which 2
expands when exposed to heat. When .co
Physical Characteristics the rated temperature is reached, the c
Frame Bronze fluid expands sufficiently to shatter the
cc
Button Bras /Co pper glass Bulb, allowing the sprinkler to 0
Sealing Assembly activate and water to flow.
Beryllium Nickel w/Teflont °
1 .
I
TFP171 Page 3 of 8
} ) ESCUTCHEON 7/16° (11,1 mm) STYLE 10 or20
PLATE SEATING , SSU*
i NPT ** NOMINAL RECESSED
i SURFACE NF MAKE — ESCUTCHEON DEFLECTOR
6
7/16" ��� 5
2-3/16" } '�'' . (11 mm)
. .
(55,6 mm) A = � � / � - IA I ; 4
MAKE NOMN IN L 1 1/2 °) I It "lit � I 2- 3/16" �, AD 2
(38,1 mm) F LATS H __ t (55,6 mm) V 3
SSP DEFLECTOR * - 2 -7/8" (73,0 mm) DIA. 1/2" NPT ** I
PENDENT RECESSED PENDENT UPRIGHT CROSS SECTION
1 - Frame 3 - Sealing 4 - Bulb 6 - Deflector * Temperature rating is indicated on deflector or adjacent to
2 - Button Assembly 5 - Compression orifice seat on frame.
Screw ** Pipe thread connections per ISO 7/1 can be provided on
special request.
FIGURE 3
QUICK RESPONSE SERIES TY-FRB UPRIGHT (TY3131) AND PENDENT (TY3231) SPRINKLERS
5.6 K- FACTOR, 1/2 INCH NPT
ESCUTCHEON 1/2" (12,7 mm) STYLE 30 or 40
PLATE SEATING 3/4" ** NOMINAL RECESSED SSU*
SURFACE NPT MAKE -IN ESCUTCHEON DEFLECTOR
iY r-r - - -� 1' 6*
1/2
6 *
\ .—---- --:- —
1/2,. tgo 5
2-5/16" 2 r
(58,7 mm) ( 12,7 mm
I _Ai _ - I NOMINAL I ; 4
."I low MAKE -IN
1 9/m III IP I ,= 2.114" �� J' ' 2
(39,7 mm) WRENCH (57,2 mm)
1 FLATS 1 i 3
r j 1 1�1 1
SSP DEFLECTOR — 2 -7/8" (73,0 mm) DIA. J 3/4" NPT ** t
PENDENT RECESSED PENDENT UPRIGHT CROSS SECTION
1 - Frame 3 - Sealing 4 - Bulb 6 - Deflector * Temperature rating is indicated on deflector or adjacent to
2 - Button Assembly 5 - Compression orifice seat on frame.
Screw
** Pipe thread connections per ISO 7/1 can be provided on
special request.
FIGURE 4
QUICK RESPONSE SERIES TY -FRB UPRIGHT (TY4131) AND PENDENT (TY4231) SPRINKLERS
8.0 K- FACTOR, 3/4 INCH NPT
Listing is based on the requirements of
Design NFPA 13, and FM Approval is based Installation
on the requirements of FM's Loss Pre- -
Cr®terra vention Data Sheets ). Only the Style The Series TY-FRB Sprinklers must be
10, 20, 30, or 40 Recessed Escutch- installed in accordance with the follow -
The Series TY -FRB Pendent and Up- eon, as applicable, is to be used for ing instructions:
right Sprinklers are intended for fire recessed pendent installations.
. protection systems designed in ac- NOTES
cordance with the standard installation Do not install any bulb type sprinkler if
rules recognized by the applicable the bulb is cracked or there is a loss of
Listing or Approval agency (e.g., UL liquid from the bulb. With the sprinkler
•
•
r
_j Page4of8 TEFP171
l
1 i SPRINKLER FINISH (See Note 7) inch NPT sprinkler joint should be ob-
K TYPE TEMP. BULB NATURAL CHROME WHITE"' tained with a torque of 10 to 20 ft.lbs.
(13,4 to 26,8 Nm). A maximum of 30
j LIQUID BRASS PLATED POLYESTER f .lbs. (40,7 Nm) of torque is to be used
con-
135F/57°C Orange to install sprinklers with 3/4 NPT con -
PENDENT nections. Higher levels of torque may
(TY1231) 155 °F /68 °C Red distort the sprinkler inlet and cause
1, 2, 3, 5 leakage or impairment of the sprinkler.
and 175 °F /79 °C Yellow
UPRIGHT Do not attempt to make -up for insuffi-
•
(TY113 200 ° F/93 °C Green cient adjustment in the escutcheon
2.8 • 286 °F /141 °C Blue plate by under- or over - tightening the
• 1/2' sprinkler. Readjust the position of the
NPT 135 °F /57 °C Orange sprinkler fitting to suit.
RECESSED 155 °F /68 °C Red
PENDENT The Series TY -FRB Pendent and Up-
(TY1231)' 175 °F /79 °C Yellow right Sprinklers must be installed in
Figure 5 accordance with the following instruc-
20 0'F/93°C Green 1, 2, 5 tions.
135'F/57°C Orange Step 1. Pendent sprinklers are to be
RECESSED 155 °F /68 °C Red installed in the pendent position, and
PENDENT upright sprinklers are to be installed in
(TY1231)" 175 °F /79 °C Yellow the upright position.
Figure 6 200 °F /93 °C Green Step 2. With pipe thread sealant ap-
135 °F /57 °C Orange plied to the pipe threads, hand tighten
PENDENT 155'F/68°C Red the sprinkler into the sprinkler fitting.
(TY Step 3. Tighten the sprinkler into the
and 175 °F /79 °C Yellow sprinkler fitting using only the W -Type
UPRIGHT 200 °F /93 °C Green 6 Sprinkler Wrench (Ref. Figure 13).
4.2 (TY2131) With reference to Figures 1, 2, 3, and
286'F/141°C Blue 4, the W-Type 6 Sprinkler Wrench is to
1/2" 1, 2 YP S P
NPT 135 °F /57 °C Orange flats. applied to the sprinkler wrench
RECESSED 155 °F /68 °C Red
• PENDENT
(TY2231)' 175 °F /79 °C Yellow The Series TY -FRB Recessed Pen -
Figure 7 200 °F /93 °C Green dent Sprinklers must be installed in
accordance with the following instruc-
135°F/57°C Orange tions.
RECESSED 155 °F /68 °C Red Step A. After installing the Style 10.
PENDENT 20, 30, or40 Mounting Plate, as spoil-
(TY2231)" 175 °F /79 °C Yellow cable, over the sprinkler threads an d
Figure 8 200 °F /93 °C Green with pipe thread sealant applied to the
pipe threads, hand tighten the sprin-
NOTES: kler into the sprinkler fitting.
1. Listed by Underwriters Laboratories, Inc. (UL) as Quick Response Sprinklers. Step B. Tighten the sprinkler into the
2. Listed by Underwriters Laboratories, Inc. for use in Canada (C -UL) as Quick Response sprinkler fitting using only the W-Type
Sprinklers. P 9 9 Y YP
3. Approved by Factory Mutual Research Corporation (FM) as Quick Response Sprin- 7 Recessed Sprinkler Wrench (Ref.
klers. Figure 14). With reference to Figure 1,
5. Approved by the City of New York under MEA 354 -01 -E. 2, '3, and 4, the W -Type 7 Recessed
7. Where Polyester Coated Sprinklers are noted to be UL and C -UL Listed, the sprin- Sprinkler Wrench is to be applied to
klers are UL and C -UL Listed as Corrosion Resistant Sprinklers. the sprinkler wrench flats.
* Installed with Style 10 (1/2" NPT) or Style 40 (3/4" NPT) 3/4" Total Adjustment Step C. After the ceiling has been in-
Recessed Escutcheon, as applicable. stalled or the finish coat has b
" Installed with Style 20 (1/2' NPT) or Style 30 (3/4' NPT) 1/2" Total Adjustment coa as een a P
Recessed Escutcheon, as applicable. plied, slide on the Style 10, 20, 30, or
"' Frame and Deflector only. Listings and approvals apply to color (Special Order). 40 Closure over the Series TY FRB
N/A: Not Available Sprinkler and push the Closure over
the Mounting Plate until its flange
TABLE A comes in contact with the ceiling.
LABORATORY LISTINGS AND APPROVALS
2.8 AND 4.2 K- FACTOR SPRINKLERS
held horizontally, a small air bubble A leak tight 1/2 inch NPT sprinkler joint
should be present. The diameter of the should be obtained with a torque of 7
air bubble is approximately 1/16 inch to 14 ft.lbs. (9,5 to 19,0 Nm). A maxi-
(1,6 mm) for the 135 °F /57 °C to 3/32 mum of 21 ft. lbs. (28,5 Nm) of torque
inch (2,4 mm) for the 286 °F /141 °C may be used to install sprinklers with
temperature ratings. 1/2 NPT connections. A leak tight 3/4
TFP171 Page 5 of 8
I SPRINKLER FINISH (See Note 8)
K TYPE TEMP. BULB NATURAL CHROME WHITE"* LEAD
LIQUID BRASS PLATED POLYESTER COATED
135 °F /57 °C Orange
PENDENT 155F/68°C Red
(TY3231) 1 234567 1235
and 175 °F /79 °C Yellow
UPRIGHT 200F/93°C Green
• 5.6 (TY3131)
286 °F /141 °C Blue
1/2"
NPT 135 °F /57 °C Orange
RECESSED 155 °F /68 °C Red
PENDENT 1, 2, 4, 5
(TY3231)' 175 °F /79 °C Yellow N/A
Figure 9 200F/93°C Green
135 °F /57°C Orange
RECESSED 155"F/68°C Red
PENDENT 1, 2, 3, 4, 5 1, 2, 4, 5 N/A
(TY3231)" 175 °F /79 °C Yellow
Figure 10 P00 °F /93 °C Green
135 °F /57 °C Orange
PENDENT 155 °F /68 °C Red
(TY4231) 1, 2, 5
and 175 °F /79 °C Yellow 1, 2, 3, 4, 5, 6, 7
UPRIGHT 200 °F /93 °C Green
8.0 (TY4131)
286 °F /141 °C Blue
3/4"
NPT 135 °F /57 °C Green
RECESSED 155 °F /68 °C Orange
PENDENT
(TY4231)• 175 °F /79 °C Red 1, 2, 4, 5 N/A
Figure 11 200 °F /93 °C Yellow
135 °F /57 °C Orange
RECESSED 155 °F /68 °C Red
PENDENT 1, 2, 3, 4, 5 N/A
(TY4231) 175 °F /79 °C Yellow
Figure 12 200 °F /93 °C Green
NOTES:
1. Listed by Underwriters Laboratories, Inc. (UL) as Quick Response Sprinklers.
2. Listed by Underwriters Laboratories, Inc. for use in Canada (C -UL) as Quick Response Sprinklers.
3. Approved by Factory Mutual Research Corporation (FM) as Quick Response Sprinklers.
4. Approved by the Loss Prevention Certification Board (LPCB Ref. No. 007k/04) as Quick Response Sprinklers; however, the
LPCB does not rate the thermal sensitivity of recessed sprinklers.
5. Approved by the City of New York under MEA 354 -01 -E.
6. VdS Approved (For details contact Tyco Fire & Building Products, Enschede, Netherlands, Tel. 31 -53- 428- 4444/Fax 31- 53-428- 3377).
7. Approved by the Loss Prevention Certification Board (LPCB Ref. No. 094a106) as Quick Response Sprinklers.
8. Where Polyester Coated and Lead Coated Sprinklers are noted to be UL and C -UL Listed, the sprinklers are UL and C -UL Listed as
Corrosion Resistant Sprinklers. Where Lead Coated Sprinklers are noted to be FM Approved, the sprinklers are FM Approved as a
Corrosion Resistant Sprinklers.
" Installed with Style 10 (1/2" NPT) or Style 40 (3/4" NPT) 3/4" Total Adjustment Recessed Escutcheon, as applicable.
"" Installed with Style 20 (1 /2" NPT) or Style 30 (3/4" NPT) 1/2" Total Adjustment Recessed Escutcheon, as applicable.
" "' Frame and Deflector only. Listings and approvals apply to color (Special Order).
N /A: Not Available
TABLE B
LABORATORY LISTINGS AND APPROVALS
5.6 AND 8.0 K- FACTOR SPRINKLERS
•
A •
. Page 6 of 8 TFPI71
I ! 2 -7/8' DIA. 2 -7/8' DIA.
} 5/8±1/4' (73,0 mm) 3/4' (19,1 mm) (73,0 mm)
i (15,916,4 mm) 1/4, 1/231!8' 1/2' (12,7 mm)
i 2 -1/4' DIA (6,4 mm) (12,713,2 mm)
(57,2 mm 2-1/4' DIA 1/4" (6,4 mm)
FACE OF ) MOUNTING FACE OF (57,2 mm)
SPRINKLER PLATE SPRINKLER MOUNTING
PLATE
• FITTING FITTING
1/8' 1/8'
r � � +I //� MAIM r
• •
MOUNTING � S NG
IN
SURFACE _ _`� II •
CLOSURE SERIES 1 -5/16' (33,3 mm) CLOSURE SERIES 1-5/16' (33,3 mm)
TY-FRB 13/16' (20,6 mm) TY-FRB 1 -1/16' (27,0 mm)
FIGURE 5 FIGURE 6
SERIES TY -FRB RECESSED PENDENT SERIES TY -FRB RECESSED PENDENT
WITH TWO -PIECE 3/4 INCH TOTAL ADJUSTMENT WITH TWO -PIECE 1/2 INCH TOTAL ADJUSTMENT
STYLE 10 RECESSED ESCUTCHEON STYLE 20 RECESSED ESCUTCHEON
2.8 K- FACTOR, 1/2 INCH NPT 2.8 K- FACTOR, 1/2 INCH NPT
2 -7/8" DIA. _ 2 -7/8' DIA. ._
5/811/4"
(73,0 mm) 3/4" (19,1 mm) 1/211/8' ( mm) 1/2' (12.7 mm)
(15,9±6,4 mm) 2 -1/4' DIA. �{ 1/4" (6,4 mm) (12,7±3,2 mm) 2 -1/4' DIA. 1/4' (6,4 mm)
FACE OF ( I MOUNTING FACE OF (57,2 mm) 1
SPRINKLER PLATE SPRINKLER MOUNTING
FITTING FITTING PLATE
1/8' 1/8"
_ } m
i S' i ,
l III iP (3,2 m) 111!, (3,2 mm)
ill MOUNTING , MOUNTING
i SURFACE
SURFACE ._-_• - -- 1
CLOSURE SERIES 1 -1/4' (31,8 mm) I CLOSURE SERIES 1 -1/4' (31,8 mm)
TY-FRB 3/4' (19,1 mm) TY-FRB 1' 25,4 mm)
FIGURE 7 FIGURE 8
SERIES TY -FRB RECESSED PENDENT SERIES TY -FRB RECESSED PENDENT
WITH TWO -PIECE 3/4 INCH TOTAL ADJUSTMENT WITH TWO -PIECE 1/2 INCH TOTAL ADJUSTMENT
STYLE 10 RECESSED ESCUTCHEON STYLE 20 RECESSED ESCUTCHEON
4.2 K- FACTOR, 1/2 INCH NPT 4.2 K- FACTOR, 1/2 INCH NPT
Care and used to cover a clearance hole, may and after installation. Sprinklers dam -
and delay the time to sprinkler operation in aged by dropping, striking, wrench
Maintenance a fire situation. twist/slippage, or the like, must be re-
I� Sprinklers that are found to be leaking pas a cra repblauclbe
or th t h ler that
The Series TY-FRB Sprinklers must be or exhibiting visible signs of corrosion
must be replaced. liquid from its bulb. (Ref. Installation
maintained and serviced in accord- Section).
ance with the following instructions: Automatic sprinklers must never be
painted, plated, coated or otherwise Frequent visual inspections are rec
NOTES altered after leaving the factory. Modi- ommended to be initially performed for
Before closing a fire protection system Pied sprinklers must be replaced. corrosion resistant coated sprinklers,
main control valve for maintenance Sprinklers that have been exposed to after the installation has been com
work on the fire protection system that corrosive products of combustion, but pleted, to verify the integrity of the cor-
it controls, permission to shut down the have not operated, should be replaced rosion resistant coating. Thereafter,
affected fire protection system must be if they cannot be completely cleaned annual inspections per NFPA 25
obtained from the proper authorities by wiping the sprinkler with a cloth or should suffice; however, instead of in-
and all personnel who maybe affected by brushing it with a soft bristle brush. specting from the floor level, a random
•
by this action must be notified. sampling of close-up visual inspec
• Care must be exercised to avoid dam- tions should be made, so as to better
Absence of an escutcheon, which is age to the sprinklers - before, during, determine the exact sprinkler condi-
1 •
1 TFP171 Page 7of8
2 -7/8' DIA. 2 -7/8' DIA.
5/8±1 /4' ( mm) 3/4' (19,1 mm) (73,0 mm)
(15,9:8,4 mm) 1/4' 1/a (6,4 mm) VW/8' IMP (12,7 mm)
2-1/4' DIA. ( ) (12,7±3,2 mm) 2 -1/4' DIA. 1/4'(6,4 mm)
FACE OF (57,2 mm) (57,2 mm)
" SPRINKLER MOUNTING FACE OF MOUNTING
FITTING PLATE SPRINKLER PLATE
FITTING
1/8' 1/8'
`�7lIW!i (3,2 mm) m) i "II Ui 7 /I' (32
;l : , t
•
MOUNTING IIP
MOUNTING SURFAC
NIII
SURFACE
- __.
CLOSURE SERIES 1 -1/4' (31,8 mm) CLOSURE SERIES 1 -1/4' (31,8 mm)
TY-FRB 3/4' (19,1 mm) TY-FRB 1' (25,4 mm)
FIGURE 9 FIGURE 10
SERIES TY -FRB RECESSED PENDENT SERIES TY-FRB RECESSED PENDENT
WITH TWO -PIECE 3/4 INCH TOTAL ADJUSTMENT WITH TWO -PIECE 1/2 INCH TOTAL ADJUSTMENT
STYLE 10 RECESSED ESCUTCHEON STYLE 20 RECESSED ESCUTCHEON
5.6 K- FACTOR, 1/2 INCH NPT 5.6 K- FACTOR, 1/2 INCH NPT
2 -7/8' DIA. _ 2 -7/8' DIA.
5/8±1/4' (73,0 mm) 3/4' (19,1 mm) 1/2±1/8' (73,0 mm) 1/2' (12,7 mm)
(15,9±6,4 mm) 2 -1/4' DIA. 1/4' (6,4 mm) (12,713,2 mm) 2 -1/4' DIA. 1/4' (6,4 mm)
FACE OF (57,2 mm) MOUNTING (57,2 mm) •
FACE OF MOUNTING
SPRINKLER PLATE SPRINKLER PLATE
FITTING FITTING
1/8' 1/8'
_ /Q (3,2 mm) n (3,2 mm)
� +
� 4 _ � - __�
I', ` MOUNTING �
MOUNTING v � I SURFACE
SURFACE , I I
CLOSURE SERIES 1 -5/16' (33,3 mm) CLOSURE SERIES 1 -5/16' (33,3 mm)
TY-FRB 13/16' (20,6 mm) TY -FRB 1 -1/16' (27,0 mm)
FIGURE 11 FIGURE 12
SERIES TY -FRB RECESSED PENDENT SERIES TY -FRB RECESSED PENDENT
WITH TWO -PIECE 3/4 INCH TOTAL ADJUSTMENT WITH TWO -PIECE 1/2 INCH TOTAL ADJUSTMENT
STYLE 40 RECESSED ESCUTCHEON STYLE 30 RECESSED ESCUTCHEON
8.0 K- FACTOR, 3/4 INCH NPT 8.0 K- FACTOR, 3/4 INCH NPT
tion and the long term integrity of the
corrosion resistant coating, as it may WRENCH
be affected by the corrosive conditions \ RECESS
present.
The owner is responsible for the in- ZENCH RECESS pf D °A" USED FOR
spection, testing, and maintenance of ' NPT MODELS)
their fire protection system and de-
vices in compliance with this docu- \ (--41 ment, as well as with the applicable \ \77
standards of the National Fire Protec- WRENCH RECESS
tion Association (e.g., NFPA 25), in (END 'B" USED FOR PUSH WRENCH
3/4" NPT MODELS) IN TO ENSURE
addition to the standards of any other ENGAGEMENT
authorities having jurisdiction. The in- WITH SPRINKLER
stalling contractor or sprinkler manu- FIGURE 13 WRENCHING AREA
facturer should be contacted relative to W -TYPE 6 SPRINKLER
any questions. WRENCH
It is recommended that automatic FIGURE 14
sprinkler systems be inspected, local requirements and /or national W -TYPE? RECESSED
tested, and maintained by a qualified codes. SPRINKLER WRENCH
Inspection Service in accordance with
Jul 11 06 03:O1p R Professional Fire 503 - 632 -4835 p.1
'; ■ , �P +"tea: , T:
t o i �E
� � 5" � 1 w�[�� � � iZ t.
/A PR 0 FEssI 0 .
FIRE SYSI". , 3 + ,,
1 2 166
J ' II Zt ! , �, ` lel ;
it FAx COVER Sif tt 1 )3t 0 TYnITSrol,
AttY,.: Fro+ ' �(1
Company: Date:'
.1T( dF (,1C ..D 77 \ \ .
Phone #. ` Company:
A t ro fe .o-na.L FLre/ Syste m
F#: No of Pam uicludiw4a- cover:
CLrcle∎ where/ appUccarle, Urg Re4po-nd.ASAP Plead Re- portdi FYI
Mema • or Co-rnunentk
‘AAA.c2.1 tJ >l t
" tr\E-31 CnE._:‘ ) E-T , L
fl
k. Adk(.1-______Y,,,_4 &zAr‘ eiki_e0Q___.,
I..\ELJ L NT (2- t 1--- \C. tk.e., ) -- (3F_____
LM Lk. `-_ L_\ ►JCS : I 1 — S \
H . - � N'
rte. W
1
its i
. ^, d. 1 N ,
D - cg c re )
17273 South Steiner Road • Beavercreek, Oregon 97004 • CCB# 41650
Phone (503) 632 -4353 • Fax (503) 632 -4835 • aprofire @bctonline.com
Jul 11 06 03:02p R Professional Fire 503 - 632 -4835 p.2
I .
SAMMYS •
- . . - .. '. ..':--:-• ' .: .F: ' - '. ' 2- - ' -: -. ' .-. .•-• . . ' : . . . : '''' • 7 t .�. ;A i*u x'1.4 - ,,.. I U
� l -- ('� } , � • � t • +iJ ( -• +s}. } ,. L � � i • S,a .
�,#
� d
'�`
1/4" 8001957 20 GST .750 114x3/4 25 5.93 125
1/4" 8002957 21 GST 100 . 114 x 1 25 6.25 125
1/4" 8003957 22 GST 200 1/4 x 2 25 8.13 125
1/4" 8004957 23 GST 300 114 x3 25 9.38 125
1/4" 8005925 24 GST 600 1/4 x 6 25 11.25 125
3/8" 8006957 10 GST .75 1/4 x 3/4 25 5.63 125
3/8" 8007957 11 GST 10 114 x 7 25 5.93 125
afp.
Q. 3/8" 8008957 12 GST 20 114 x 2. 25 7.50 125
_ 3/8" 8009925 27 GST 25-380 3/8 x 2 -112 25 11.56 125
Q. 7 3/8" 8010957 30 GST 30 1/4 x3 25 8.75 125
3/8" 8011925 403 GST 40 1/4 x4 25 10.00 125
3/8" 8012925 14 GST 60 1/4 x6 25 11.25 125
1/2" 8013925 8 GST 2 1/4 X 2 25 8.75 125
112" 8014925 6 GST 2.5-380 3/8X2 -1/2 25 12.50 125
1/2" 8015925 15 GST 3 114 X3 25 13.13 125
1/2" 8016925 16 GST4 1/4X4 25 13.25 125
1/2" 8017925 17 GST 6 1/4 X 6 25 13.69 125
r >i X ". i' • r 7, se,�' ,r Y } (:if et` 1,51
• r »1 . ,i r l 4'1'7 '. -F l i f c I A .,. -r
� eel '
1/4" 8024957 50 DSTR 100 1/4 -20 X 1 25 7.81 125
1/4" 8025957 51 DST 100 114 -14 X 1 25 6.56 125
1/4" 8026957 52 DST 150 114 -14 X 1 -1/2 25 6.88 125
1/4" 8027957 53 DST 200 1/4-14 X 2 25 7.50 125
1/4" 8028957 54 DST 250 1(4-12X2-112 25 8.44 125
1/4" 8029957 55 DST 300 114 -14 X 3 25 9.06 125
1/4" 8030957 56 TEK 500 12 -24 X 1 -1/2 25 6.88 125
Nut Driver
-- Q• ^ 3/8" 8037957 29 DSTR 1-1/2' 12 -24X 1.1/2 25 7.75 125 Use #14 Nut Dnver
- - lit Q. 3/8" 8038957 30 DSTR 1" 1/4 -20X 1 25 7.19 125 for Sammysand
e' ± • 318" 8039957 31 DSTR 516 5/16-18 X 1 -1/4 25 7.06 125 s"'velNead
\ v, w)1 318" 8040957 32 DST 10 1/4 -14 X 1 25 5.94 125
3/8" 8041957 33 DST 15 1/4 -14 X 1 -1/2 25 6.56 125
3/8" 8042957 34 DST 20 1/4 -14 X 2 25 6.88 125
3/8" 8043957 35 DST 25 1/4 -14 X 2-1/2 25 7.81 125
3 /8" 8044957 36 DST 30 1/4 -14 X 3 25 8.44 125
Q• 3/8" 8045957 37 DST 516 5/16 -18 X 1 -1 /4 25 7.50 125
3/8" 8046957 38 TEK 50 12 -24 X 1 -1/2 25 6.88 125
- 1/2" 8031925 601 DST2.0 1/4 -14X2 25 8.44 125 Parl #8113910
1/2" 8032925 1113 DST 2.5 1/4 -14 X 2 -1/2 25 9.06 125 Item # 100
1/2" 8033925 422 DSTR 1.0 1/4 -20 X 1 25 8.25 125
1/2" 8034925 28 DSTR 5.16 5/16 -18 X 1 -1/4 25 10.00 125
1/2" 8035925 443 DST 5,16 5/16 -18 X 1 -1/4 25 8.44 125
1/2" 8036925 5 TEK 5.0 12.24X1 -1/2 25 7.50 125
Rod Screw . Box : Weight Case
Concrete Approvals part # Item �! Mlodei 9
�✓On 11eTele Size Descriptions ..Qty, (per4 Qty
1/4" 8058957 64 CST 200 5/18 x 1 -1/2 25 8.44 125
3/8" 8059957 61 CST 20 5)16 X 1 -1/2 25 7.81 125
1/2' 8050925 66 CST 2 5/16 X 1 -1/2 25 8.75 125
z
Jul 11 OG 03:02p R Professional Fire 503 - 632 -4835 p. 3
1 • .
1 •
=' SIDEWINDERSTM
. . . ...: H o R ` I ; « ' r �
. ,.... u`j. _ `.4.R't t4L. ........ r r , .
_ 4 . , r . f ','1,,i :•-•,.:11-1'. 1' o
t { a_ �� ,3 " ` f .+A
T %f'� r1i - n�� '41. rJt . Y!- t
Nut Driver 114" 8018957 4016 SWG 100 1/4 X 1 25 9.38 125
' Use #148W Nut Driver 114" 8019957 300 SWG 200 1 /4 X 2 25 10.00 125
for Sdewrders and
12 Rod Sarnmys 3/8" 8020957 18 SWG 10 114 X 1 25 7.50 125
ci-.� 3/8" 8021957 19 .SWG 20 1/4 X 2 25 8.75 125 V. :
' • 3/8" 8022925 26 SWG 25-380 3/8 X 2 -1/2 25 12.81 125
[ , 318" 8023925 25 SWG 30 1/4 X 3 25 10.63 125 : C
I
''Q fir . ' *•` ..7 .� l� Yi 1 4 1t . ''M��J' 1 f' , .. V` s ., ; It
i
; . 4 '1 . "17 r ,..x x 1:2C ■J 1jiT f I t �� r! Y. - 4 . / r gtYi /I Y' ' i w i c. eel
,� ) ti r ', ^.• �i`,x :' > .t±..•:�3� 1�.T]e..K�, ". !R•' i`,1! 1� >, 7 r ";�r�`
3/8" 8050957 39 SWO 10 1/4-14 X 1 25 7.50 125
3/8" 8051957 40 SWO 15 114 -14 X 1 -12 25 9.38 125 r
Part # 8114910 3/8" 8052957 41 SW O 20 1/4-14 X 2 25 8.13 125
Item # 101
3/8" 8053957 42 SW D 516 5/16.18 X1-1/4 25 8.75 125
Q• 3/8" 8054957 48 SWOR 1 -1/2' 1 /4 -20X 1 -1/2 25 9.06 125
°Q,• 3/8' 8055957 43 SWDR 1" 114 -20X 1 25 8.75 125
Q• 3/8" 8056957 44 SWDR 516 5/16 -18 X 1 -1 /4 25 10.31 125 k 1`-ir:
3 /8" 8057957 45 SWT 15 12 -24 X 1 -1/2 25 7.81 125 r
Approvals Rod Part # item # Model Screw Box Weight Case Concrete
Size Descriptions Qty. (per 125) Qty
1/4' 8062957 1900 SWC 200 5116 X 1 -112 25 9.38 125
3/8" 8061957 65 SWC 20 5/16 X 1 -1/2 25 9.38 125
• Most Items Available in Stainless Steel
NEW! NEW! NEW! NEW! NEW!'NEW!;iNEW!."NEW *::,NEW!. NEW! • *. Use . with3 /8 " .
Sammy Swivel Head"
� -=
Approvals Part# Item # Model Screw Box Weight Case \
Descriptions Qty. (per 125) Qty U.S. Patent No. • 17 deflection from vertical
6,443 • Accommodates up to
Q• 8139957 4702 SH -GST 20 1/4 x 2 25 9.38 125 3-1/2 x 12 pitch roof
e• 8140957 '4703 SH -GST 22SS 1/4 x 2 25 9.38 125 t \ • Also available in stainless steel
Q' 8141957 4704 SH -GST 30 1/4 x 3 25 10.94 125
Q• 8142957 4705 SH-GST 305$ 1/4 x 3 25 10.94 125 • Use #14 Nut Driver (black)
.''-' 8137957 4700 SH -OSTR 1 1/4-20 x 1 25 9.38 125 \
� 8138957 4701 SH -DSTR 1 - SS 1/4-20 x 1 25 9.38 125 /� ®
Patent Pending SAMMY X-PREs`S"
od Directly 0 Steel Screw Box Weight Case
Han6Q hroa- -- a petal _ ; Approvals Part # Item # Model
Thin Gau9 _ Ga. Descriptions Qty. (per 125) Qty.
p &Pu i
ti 11420x1 -1JB
',,.,/j °� 22 -20 8150922 500 XP 20 25 10.3 125
`^'�^i' �•� "� s Sammy X -Press 20
y' - ' : : 1/4- 20x1 -1/8
p' 1 B -16 8153922 503 XP 35 Sammy X -Press 35 25 10.3 125
Uninstalfed - -,,;"; i t i Sammy X -Press It
��+�� ; 8151910 501 XPIT 1 1.02 1
SA 1�iM Y -' : ds; • °r ' Installation Tool
> y_i<., {# ", (Kit includes: Sleeve, Bit Receiver, Hex Wrench, and 25/64' Dnr Btt)
PRESS r "' ` _ ` 8152910 502 XPDB 25/64" Drill 8d 1 0.14 1
Installed
1 I .
■.1') ;,,,t• .
(. CY) , I. c 0fl cq c.> (...)
CL ..
R:Iiic,. ' ' C' '" "-) (- ,1 `. gi'ifi 4i
•,': 1,1
0
....ti 1
t.11.
rfi v.i
!. '2
,>;' c) , ) (.) (c.,), 4 ,
: ;,..),,,... ,,, , , ,....., ,.., , ,..,, • CD
't• CII" ■,': I 1 ) :1 t ..1 c• 1
•i; ' t
' I r ; c) • t -...i. 1 . ) 1 l C 01, • V-
.0 Ii , I • 1 1,1 1 .)
() L) .f) (,s1 lc, (),,()
• ..3 i t • • I () t i
: •
( ,'
tafatr" a ) a ) a. , a. , a , I'llfit,'• < 0 0 0 C) () 0,C) C.)
(u .01 . i C•n) , 4 .-t 1-., (9
If) 41 . r ,.0 . i VI • t • t I • 1 IN II I I cat) t-- t -- (I) t 3 ■(,) 7.,
(I)
") ``■ (10) ■(•''' (i)
CO 1.9:
[-` 1
Y • I, ,
II,
.):,,,
(I
I , (I) •
(I) ,..) .!) !.I', CO . .L.I' „C‘2
( , I it) ,-i• i 0 01 1
1 ay, c--, aa, .-1. a.‘, .
'•10)
11.1 1•1f1/ 1.) • t 10 0) 1 • :
••• • ... 1
• 1 t— 1 .
CD
1 tIll ,..1 .4...
, , 1 I ..,
1 I ..
cc)
iP '-
".,
co 0-1 0
,
, I •P I
■,f 1
in
t
RI 94 1-4 c...: I )
--
„ ;. ON 1 -- ) 1.-: , ) "1 •4
6:0 '1" ',-- t ON (4) F•••;•
lip I tial g § • • ... • 1 I i 1
•• .
. . s■ 6 1 - ' 1 0 i .;.' i; r- (. ,-..
II, .,
•,, — ii ',,-1.- IF:
v, ( 1 t
U. 2 c, .1: v, •,., .o .0 ,
1: g3 o , ■ ., :ii ':
(I
. . (.1 ••"
:
ILI ' . I
c t-11 ,, c), %.,_ III •.; tt)
qi W fi cr) .,„
,E , i
c, . .,„
. t.
.._, it'f 0
1 , 4 ■ • '11 (L '1 3 • .,
Irl 4 .. 1 •1 •i l II • ti
a) 4 , r :
t., (1, kl at 11 CI
1
o
I , ?
C•
. q
. c ) f•I s .
10 - ' oi
.01 1 '
L tki i : 1 • i ni C. -
t!,,i %%I co , ,› (%1 • .
' • . , 0) •:'
a,. f I» tlj "ni •`) • ' w id •()
1
1 •<,; .. (.) I: ( ) s
. .., 6) 1 1
CC 11-
:,,... 4 , ti) ki t : • , (I) " ' ■
4) ....
es
MI 1; 1 6 ,,,) II I. I) 04
ki. 1; e) c)
- 0 0, .--. :I ,
hi 4 .0 i1 .. • h
t ) coi •
ei
1. . . .i p i U,
.44 q,
( ) I , hi • •1: e, () I'
0 (i4; 0 ) vi . ,, i •), ,, In . •
t: t I .. r• • ' ' g '
•• In.
CT) 0 li 1! 1 • (I :1 , Ill Nj (I (I :1 t 111
I : • 1 • , I i• 1,
CI 1••:'i t • ' • • t
r..4 {.1 . cc /1 t: 0, ,. • .
o .
aa.' i) . , tt ?
r'1,
O .
I
`,.....,"
. .
• .
Jul 11 06 03:02p fl Professional Fire 503 - 632 -4835 p.5
1
-
TOLCO
T
CORONALCA.OMMTV.5589
•
. . . . .
FIG.200
ADJUSTABLE RING HANGER
Size Range — 1/2 thru 8 inch pipe. 4:0
Material — Carbon Steel, Mil. Galvanized to G -90 : 1
specifications.
Function — For fire sprinkler and other general piping it
purposes. Knurled swivel nut design permits hanger adjustment after installation. Spring tension on nut holds it • securely in hanger before installation. Swivel nut is easily
removed.
Features — Flared edges on sizes 1/2 thru 2 inch. •
Eases installation and protects CPVC pipe from any
abrasion. _.
Approvals — Underwriters Laboratories listed in the U.S.
(UL) and Canada (cUL) for Steel and CPVC plastic pipe
and Factory Mutual Engineering approved. _Conforms to
Federal Specifications WW- H -17IE, Type 10, and
Manufacturers Standardization Society SP -69, type 10. B
Maximum Temperature - 650 °F.
Finish Mil. Galvanized, HDG, and Stainless Steel. A `
Order By Fibre nurimber and pipe -size: / 1
7
1
C) cg) ■
PIPE ROD MAX. REC. APPROX. 1/2 - 2 inch pipe
SIZE SIZE A B LOAD LBS. WT. /100
1/2 3/8 3 -1 /8 2 -5/8 400 11
. � 3/4 3/8 3-1/8 2 -1/2 400 11
�� 1 ' 3/8 3 -3/8 2 -5/8 400 12
1 -1/4 3/8 3 -3/4 2 -7/8 400 13 B
1 -1/2 3/8 3 -7/8 2 -7/8 400 14
2 3/8 4-1/2 3 400 15 A 1'��
2 -1/2 3/8 5-5/8 4-1/8 600 , 27 / `
3 3/8 5 -7/8 4 600 29 ■
3 -1/2 3/8 7 -3/8 5 -1/4 600 34 VII J
4 3/8 7 -3/8 5 1000 35
5 1/2 9 -1/8 6-1/4 1250 66 �
6 1/2 10-1/8 6-3/4 1250 73
8 1/2 13-1/8 8-3/4 1250 136 2 1/2 - 8 inch pipe