Report Oregon Residential Specialty Code N1107.2
HIGH-EFFICIENCY INTERIOR LIGHTING SYSTEMS
Permit No.: As-c- —
cDVA-CX4A2> Jurisdiction. _--
•
Site Address:
C__nPt-S*V
Subdivision/Lot#:
and/or
Map and Tax Lot#:
By my signature below, I certify that a minimum of fifty(50)percent of the permanently
installed lighting fixtures in the above mentioned building have been installed with compact or
linear fluorescent, or a lighting source that has a minimum efficacy of 40 lumens per input watt.
(Oregon Residential Specialty Code N1107.2)1
Signatur : Agent Date: (a/I ti/ )to-
tractor/Authoriled
Print Name:
ORSC Section N1107.2.High-efficiency interior lighting systems. A minimum of fifty(50)percent o the
permanently installed lighting fixtures shall be installed with compact or linear fluorescent,or a lighting source that
has a minimum efficacy of 40 lumens per input watt Screw-in compact fluorescent lamps comply with this
requirement.
The building official shall be notified in writing at the final inspection that a minimum of fifty percent of the
permanently installed lighting fixtures are compact or linear fluorescent,or a minimum efficacy of 40 lumens per
input watt
1:\BuildingWorms\RES-liighEfficiencyLighting.doc 07/01/08
Oregon Residential Specialty Code R408.1
MOISTURE BARRIER ACKNOWLEDGEMENT FORM
I, , am the general contractor or the owner-builder
at the following address:
Site Address:
City:
Permit#:
Subdivision/Lot#:
kk Cc)
and/or
Map and Tax Lot#:
To conform with the 2014 Oregon Residential Specialty Code(ORSC), Section R408.1
Ventilation.I am notifying the building official that I have installed the Moisture Barrier as per
Requirement in ORSC Section 408.1 and have taken the following steps to meet this code
requirement:
The ground surface of the under-floor space is covered with 6-mil black polyethylene
sheeting with
DiOints lapped 12"at seams and
rq-EXtending up the foundation walls 12".
f
Date: (.0/0fr)
or Owner-Builder
IABuildineForm\RES-MoistureBarrier.doc 09/13/2016
Oregon Residential Specialty Code R318.2
MOISTURE CONTENT ACKNOWLEDGEMENT FORM
, am the general contractor or the owner-builder
at the following address:
Site Address:
City:
Permit#:
Subdivision/Lot#:
t\Co
and/or
Map and Tax Lot#:
To conform with the 2008 Oregon Residential Specialty Code(ORSC), Section R318.2 and
OAR 918-480-0140, I am notifying the building official that I am aware of the moisture content
Requirement of ORSC Section R318.2 and have taken steps to meet this code requirement.
[Section R318.2 is provided for reference].
R318.2 Moisture Content: Prior to the installation of interior finishes,the building
official shall be notified in writing by the general contractor that all moisture-sensitive
wood framing members used in construction have a moisture content of not more than 19
percent by dry weight of dry framing members.
Signatum: _ N71 Date:
ctn;or Ovvner-Builder
I:\Buildineform\RES-MoistureScuitiveWooct.doc 09/25/08
Moffet Energy Modeling
CCB#223372
Phone:916-342-0742
tylerPmoffetco.com
Blower Door Test Affidavit
Permit#: Builder: Taylor Morrison
Site Address: Roshak Lot 116: 14218 SW Gold Coast Terrace,Tigard,OR 97224
Conditioned Floor Area (sq. ft.): 1838
Source: Calculated from plans Calculated Building Volume (cubic feet): 17780
TEST RESULTS: 1193 CFM @ 50 Pa
ACH @ 50 Pa = {(CFM x 60)_Volume}: 4.03
Ring: Open O B
Minneapolis Blower Door and DG 700 Manometer
I certify that these building leakage rates are accurate and determined using standard BPI testing
protocol.
Company Name: Moffet Energy Modeling Technician:Tyler Moffet
Technician Signature: Date: 6/16/2020