PFI2020-00474 CITY OF TIGARD PUBLIC FACILITIES IMPROVEMENT PERMIT
'! COMMUNITY DEVELOPMENT Permit#: PFl2020-00474
Date Issued: 12/09/2020
TIGARD 13125 SW Hall Blvd.,Tigard OR 97223 503.718.2421
Parcel: SEG1403
Jurisdiction: Tigard
Site address:
Subdivision: Lot:
Project: PGE Job#M2922744
Project Description: SEG 1403/1418. Replace 3 segments of 30 UG PRI and install 577 VT to replace/relocate damaged VT.
Class of Work: FEES
Description Date Amount
Type 1 - Utilities (gas, electric, data) PFI Permit Fee 12/09/2020 $300.00
Total $300.00
Owner:
REQUIRED INSPECTIONS
Call 503-639-4175 for the IVR inspection request line or visit the City of
PHONE: Tigard website at www.tigard-or.gov to schedule inspections online.
Contractor: •
PHONE:
Applicant:
TAYLOR REED
2213 SW 153RD DR
BEAVERTON, OR 97003
PHONE: 5037186308
Please sign below to indicate acceptance of conditions and return a copy with the proposed work schedule along with names and contact
information of responsible parties before beginning work.
PermitteefApplicant
Signature: See application
Issued By:
Special Conditions(See Attached)
Note:THIS PERMIT DOES NOT COVER WORK ON PRIVATE PROPERTY
Conditions for PF12020-00474
Type: Condition Name: Status: Severity:
PFI_Utilities 01 -WORK SITE REQUIREMENTS Applied Notice
Applicant must comply with all applicable provisions of federal and state law,the Tigard Municipal Code, and the terms of
any agreement with the City of Tigard regarding work to be done pursuant to this permit.
PFI_Utilities 02-WORK SITE AREA Applied Notice
The work area and approach roads shall be maintained in a clean condition,free from obstructions and hazards. The
spreading of mud or debris or storage of materials or equipment of any kind upon any public roadway is strictly prohibited
and violation shall be cause for immediate cancellation of the permit. The City may at any time order immediate clean-up
and suspension of work to accomplish clean-up.
PFI_Utilities 03-WORK SITE EROSION CONTROL Applied Notice
Prior to starting work,effective and approved erosion control devices must be installed and maintained meeting the Clean
Water Services and DEQ requirements. The City may at any time order corrective action and suspension of work to
accomplish effective erosion control.
PFI_Utilities 04-WORK SITE REPAIRS Applied Notice
Disturbed landscaped areas shall be restored or replaced. Existing signs, pavement markings, mailboxes, etc. shall be
reinstalled or replaced,with like kind of material. Obtain City approval of restoration work.
PFI_Utilities 05-TRAFFIC CONTROL SPECIFICATIONS Applied Notice
Applicant shall provide traffic control according to the current edition of the"Manual on Uniform Traffic Control Devices
[MUTCD]for Streets and Highways", U.S. Dept. of Transportation, FHWA,current edition,American Traffic Safety Services
Association [ATSSA], and Oregon Temporary Traffic Control Handbook[OTTCH].
PFI_Utilities 06-TRAFFIC CONTROL PLAN Applied Notice
Submit a job specific traffic control plan. A copy of the approved traffic control plan shall be readily available at the work
area.Traffic control devices,flag persons, etc., shall be in place prior to initiation of construction work and shall be
effectively maintained.
PFI_Utilities 07-TRAFFIC CONTROL ROAD CLOSURE Applied Notice
Public roadway shall not be closed to traffic,at any time,without obtaining written approval from the City Engineer. The
applicant is responsible to provide 48 hour advance notice of traffic flow disruptions to affected businesses, residents and
area wide Emergency Services: 503-629-0111 (Tigard Police Dept.,Tualatin Fire&Rescue) and to 503-962-8140(Tri-Met)
and 503-431-2345(Tigard School District) and other service providers impacted by such closure.
PFI_Utilities 08-TRAFFIC CONTROL ADVANCE WARNING Applied Notice
Advance warning of traffic disruption shall be provided to the public by placement of an approved advance notification sign
at each end of the construction area 72 hours (min.)before initiation of construction work.
PFI_Utilities 09-TRAFFIC CONTROL PROPERTY ACCESS Applied Notice
Access to existing properties shall be maintained at all times, including normal delivery service and mail service. Obtain City
approval of any access closures.
PFI_Utilities 10-TRAFFIC CONTROL WORK HOURS Applied Notice
Work is permitted in daylight between the hours of 7:00 a.m.to 7:00 p.m. Mon-Fri unless otherwise authorized by the City.
PFI_Utilities 11 -TRAFFIC CONTROL LIMITED WORK HOURS Applied Notice
Hours of construction work on collector and arterial roads will be limited to 9:00 a.m.to 3:00 p.m. unless authorized by the
City Engineer. Work will not be permitted on collector and arterial roads between 3:00 p.m.to 9:00 a.m. unless authorized
by the City Engineer.
PFI_Utilities 12-TRAFFIC CONTROL MODIFICATION Applied Notice
The City reserves the right to add to or modify traffic control requirements as necessary to effectively control traffic and to
assure public safety.
PFI_Utilities 13-DRAINAGE CONTROL Applied Notice
Drainage shall be controlled within the work site and shall not adversely affect adjacent private property, public property and
the receiving system. The City may at any time order corrective action and suspension of work to accomplish effective
drainage control.
PFI_Utilities 14-UTILITY NOTIFICATION Applied Notice
Oregon law requires following the rules adopted by the Oregon Utility Notification Center. Said rules are set forth in OAR
952-001-0100 through OAR 952-001-0080. Copies of said rules may be obtained from the Center by calling 503-246-1987.
If you have any question about the rules,contact the Center. NOTE: Damage to utilities shall be corrected at the permit
holder's expense.
PFI_Utilities 15- UTILITY LOCATION CONFLICT Applied Notice
Applicant must verify all existing utilities for both vertical elevation and horizontal location prior to start of work(pothole
before digging if necessary). Should conflicts arise and redesign or relocation of facilities be necessary, it shall be done at
the applicant's expense. Changes must be approved by the City in advance of work.Applicant shall coordinate the work
with affected utility agencies.
PFI_Utilities 16-TEMPORARY PATCH Applied Notice
A temporary hard-surface patch shall be placed on trenches within roadways at the end of each work shift. Obtain advance
approval of patching method. No trench shall be left at any time in an un-safe condition. Applicant is responsible for and is
liable for hazards or damage resulting from the prosecution of the work.
PFI_Utilities 17-REPAIR OF EXISTING FACILITIES Applied Notice
Work under this permit shall include repair of existing facilities(roads,ditches, etc.) as may be necessary, as determined by
the Inspector,to overcome deterioration or damage which occurred in conjunction with the work authorized by the permit.
Corrective work shall be done at the applicant's expense.
PFI_Utilities 19-PRECONSTRUCTION MEETING Applied Notice
Before initiating any construction activity,the applicant shall coordinate with the City's inspector, Trent Brickey at
971-228-9269,to establish a preconstruction meeting.
PFI_Utilities 20- NOTICE TO COMMENCE WORK Applied Notice
The applicant shall notify the City's Inspector twenty-four(24) hours prior to commencing work, prior to any staged
inspection, and after completing work covered by the permit.
PFI_Utilities 21 -PERMIT/PLAN ON SITE Applied Notice
A copy of the permit including a Certificate of Insurance, and all attachments, and a copy of the approved construction plan
and all amendments shall be readily available at the work area. All work shall conform to the permit terms, conditions and
provisions and to the City approved permit plans, and approved plan amendments and to the City's standards and
specifications and to these General Conditions. Changes to any of these must be approved by the City, in advance of work
performance.
PFI_Utilities 22-DAILY INSPECTION REPORTS Applied Notice
Applicant shall submit daily inspection reports, on a weekly basis,to the City's Inspector.
PFI_Utilities 23-MONUMENT PROTECTION Applied Notice
Existing monuments, property corners, and survey markers shall be protected. Replacement shall be at the permit holder's
expense.
PFI_Utilities 24-VALIDATION OF MATERIAUCONSTRUCTION Applied Notice
The City's Inspector may, at his discretion, require tests and or reports from the applicant to validate claims of material or
construction adequacy/compliance. Such tests/reports shall be provided at the applicant's expense.
PFI_Utilities 25- EMERGENCY CONTACTS Applied Notice
Provide to the City inspector, in writing,the names and 24 hour emergency telephone number of two(2)persons who have
authority to resolve problems,take corrective action and, in general, will be responsible in case of any emergency. The
applicant shall notify the City Inspector, in writing, of any/all assignment changes.
PFI_Utilities 26-RIGHT OF ENTRY/EASEMENTS Applied Notice
Applicant to obtain proper right-of-entry and/or easements prior to starting work. Proof of right-of-entry or properly executed
easements, shall be provided to the City. The City shall in no way be construed to be liable for the applicant's failure to
obtain or provide for proof of right-of-entry or easements.
PFI_Utilities 27-PRIVATE PROPERTY AGREEMENTS Applied Notice
Provide the City a copy of an executed agreement's]from the owner for each private property disturbed by construction
activity.
PFI_Utilities 28-AS-BUILT DRAWING Applied Notice
1,2,3,4,5 28-AS-BUILT DRAWING
One as-built drawing showing all new public improvements, including any revision made to the previously approved
construction plans and, also, any improvement which may impact an existing public system or facility, shall be provided to
the City by a registered civil engineer along with an engineer's certification of installation compliance(Certificate of
Compliance).
1,2,3,4,5 28-AS-BUILT DRAWING
One as-built drawing showing all new public improvements, including any revision made to the previously approved
construction plans and, also, any improvement which may impact an existing public system or facility, shall be provided to
the City by a registered civil engineer along with an engineer's certification of installation compliance(Certificate of
Compliance).
One as-built drawing showing all new public improvements, including any revision made to the previously approved
construction plans and, also,any improvement which may impact an existing public system or facility, shall be provided to
the City by a registered civil engineer along with an engineer's certification of installation compliance(Certificate of
Compliance).
PFI_Utilities 31 -OTHER Applied Notice
Other
ii City of Tigard pH #: 2020-00474
ENGINEERING DEPARTMENT
TIGARD Public Facilities Improvement (PFI) Permit
PROJECT INFORMATION
PGE Job # M2922744 TYPE OF WORK
Project name: 8 TYPE 1—Franchise Utility Work
Brief description of project: RPLC 3 SGMNTS OF 30 UG PRI AND INST performed byNWN,PGE, or utility
agency
577 VT TO RPLC/REL DMGD VT ❑ TYPE 2—ROW Sidewalk/Driveway/Sewer
Work performed for the purpose of.
• Sidewalk installation or repair
• Driveway approach installation and repair
SITE INFORMATION • Sanitary sewer lateral installation and
7190 SW FIR LOOP main line tap
Location (address if available): ❑ TYPE 3—Full Scale Development Work
SEG140311418 performed with land use approval which
includes any of the following.
• Subdivisions or Partitions
APPLICANT INFORMATION • Street widening
Name: PGE DENISE CHON FOR Linda Ott • Mainline installation for sanitary sewer,
storm sewer, Tigard water, and Tigard
Mailing address: 2213 SW 153rd Dr water service area
Zip: 97003 E TYPE 4—Small Cell Technology
City/State: Beaverton, OR
E TYPE 5—Tigard Triangle
Phone:
CREWCOODINATION-WESTERN@pgn.com Email: Phone: NOTE: Type 1 and 2 applications may be
Taylor Reed emailed to rowpemutstatigard-or.tov.
Contact name:
Phone: +1 (503) 718-6308 Email:
CONTRACTOR INFORMATION El Same as applicant
Name: CCB Number:
Mailing address: City/State: Zip:
Phone: Email:
ENGINEER INFORMATION
Name:
Mailing address: City/State: Zip:
Phone: Email:
ADDITIONAL INFORMATION
Estimated value of work is required(if over$5,000):$ (within the public right-of-way)
Is work related to a LAND USE DECISION? Dyes El No Case number:
City of Tigard • 13125 SW Hall Blvd. • Tigard,Oregon 97223 • wwwtigard-or.gov • 503-718-2421 • Page 1 of 4
APPLICANTS
NOTE: Person specified as`Applicant" shall be designated"Permittee"and shall provide financial assurance for
work,if required by the city pursuant to TMC 15.04.140.
* With the exception of a utility operating pursuant to a valid franchise or license with the City of Tigard,when the owner and the applicant
are different people,the applicant must be the purchaser of record or a lessee in possession with written authorization from the owner
or an agent of the owner. The owner must sign this application in the space provided or submit a written authorization with this
application. Franchised or Licensed Utilities are not required to obtain the owner's signature on the application.
I,the applicant, certify that:
• To the best of my knowledge,all the information provided within this application package is complete and
accurate.
• The above request does not violate any recorded deed restrictions that may be attached to or imposed upon the
subject property.
• If the application is granted,I will exercise the rights granted in accordance with the terms and subject to all the
conditions and limitations of the approval.
- Linda Ott 12.7.20
Applicant's or authorized agent's signature Print name Date
Property owner's signature (if required) Print name Date
STAFF USE ONLY
Case No: PF12020-00474 Permit fee: , �G�J Received by: AL Date: 12/7/2020
Approved by: /re-#/'Tf/3• Date: (217/Z024 Notified by: Al-- Date: 44'11010
City of Tigard • 13125 SW Hall Blvd. • Tigard,Oregon 97223 • www.tigard-or.gov • 503-718-2421 • Page 2 of 4
DEVELOPMENT ENGINEERING FEES
Public Facility Improvement(PFI)Permit:
INITIAL PFI PERMIT FEE
Part 1: Required submittal fee is 10%of the Net PH Permit Fee.See below for calculations.Minimum of$300.
NET PFI PERMIT FEE
Part 2: All non-water system improvements engineer's estimate X 7%(less the initial PH Permit Fee).
WATER LINE CONSTRUCTION FEE
Part 3: All public water system improvements engineer's estimate X 12%.
FOR STAFF USE ONLY FOR STAFF USE ONLY
TYPE 4: SMALL WIRELESS FACILITY TYPE 1—3:DETAILED SUBMITTAL
CHECKLIST REQUIREMENTS
Does applicant have a right-of-way license? ❑Yes ❑No TYPE 1 AND TYPE 2-Must include a sketch
showing:
Under the wireless facilities standards,is the proposal CI Dimensions
considered?(check all that apply): ❑Small Cell ❑Macro ❑ Street Name
How many install sites are proposed as part of this permit ❑ Site Address
application?
TYPE 3-Must provide 4 sets of plans (sized 24 x 36
or 22 x 34) and an electronic version of all submittal
The proposed equipment is located on which of the following: items. The plans must that include:
❑Public Right-of-Way ❑Private Property
❑ Cover—Site,Vicinity,Abbreviation,Legend
If equipment is to be located on private property,describe the ❑ General Notes(City,Water,Sewer,etc.)
type&use: ❑ Street(Plan,Profile)
❑ Water,Storm and Sanitary(Plan Profile)
❑ Water Quality Facilities
❑ Grading
❑ Landscaping/Tree Plan
El Composite Utility Plan(Electrical,Phone,Gas, Storm,
Sanitary,Water,Signage,Street Lights,etc.)
❑ Details
❑ Traffic Sight Distance
❑ Signing and Striping
❑ Street Light Plan and Photometric
❑ Engineers seal/signature
❑ Sheet label(project land use name,revision and plan
log block,dates and sheet numbers.)
❑ Engineer's Construction Estimate
Additional Submittals
(per land use conditions,if applicable)
0 Traffic Report
0 Storm water Drainage Calculations
❑ Geotechnical Report
0 Preliminary Access Report(Sight Distance)
❑ Proposed Plat
❑ Pathway Design
❑ Water Provider Approval
City of Tigard • 13125 SW Hall Blvd. • Tigard,Oregon 97223 • wwwtigard-or.gov • 503-718-2421 • Page 3 of 4
Edge of Pavement
pt,, �� Ditch '�`
9treatl�ght � �• •—•—•—•.—r—•—
® 1 I D r\
1
i 7— Io osrd'Sl a LIiI Ste'
;I 1 j
Q)
iN= I Existing House
' �; j Existing
`� ,: • Driveway
V
41P/ Cr'l
§,
•
u1 , I rt'�� I
f� U1 I I
i
i I. Existing Shop �
1 \ I
Powerpole i I o I I
-.� e
I� 95' 1
w O - 3ropertyLina.'—.—.—.L.—.
I 6 I Fire Hydrant(CH)
i I
I Scale- t'=30'
i I
i I
i I
TYPE 1 AND TYPE 2:
MINIUM SKETCH REQUIREMENTS (Put N/A if lint applicable)
North arrow Property lines&dimensions Existing utilities locations
(sewer, storm,water)
Street&street names All existing structures
Proposed work Existing curb or edge of pavement Utility& street light poles
Existing S/W or D/W apron Slope of property Trees
City of Tigard • 13125 SW Hall Blvd. • Tigard,Oregon 97223 • www.tigard-or.gov • 503-718-2421 • Page 4 of 4
LSEGEND
aoa Psu m LA xf iNn KiLZ: V1 _
t'' .''''''' ".'Th
y Als bA
IMMPTDN RIWE APARIMEMTd] m •l5]Fnl =rcucrcouxmvxulrts�Maravxes
dWVMNd AT : :::POLES
POLES
T�POLE CLASSFf.LM.ENTM46f
MP1
s �POLESSEN,'
1 r1 0,Y 11m �rw \ CONq/CIOR3mswrwwnawr..M .sue
#)x ,a .n n u.venue e•en vrwss
WLf ViJ 11NEWl VAULTS
Install:
SU]gN.VAULT GONG YOD uvun S]f N1 N. 10
BUARIO-CONC.CBL NON-SLIP VLT LID NR041,1Y 6]S5]]1F AN SMN
awaY3 uNvo
•R'Nu.-mw'.amuawavnrro Nw-.,a-nxnµ
RI N-BO TAP UrIRI CUSS.CBE Pur iNP
IT)ELBOW MT.MOD CABLE.=K J r ar•w•wuL Liav+cv vv.v�.ev vuuaw
IA DUST COVENS
IN 102 EQUIPMENT
Nan
r'a Y Iva
M �a-w1NT E ....W,rrr,r�,,,,,...e...
"'" N--t n� MceµAaaaN///111FFpT��-aa LANDSGPING NOTES' NOTES TO CONTRACTOR.
u mow•nr len A CONTRACTOR TE CUT ASPHALT MOUND
/ WU Pl-10T5:
i WLA VT.F460. to FOSS-REPAIR DAMAGES THEVT-
FO THE LINE CREW TO ABANDON
N. F AROUND POLE. EXISTINGTHE PRIMARY CANES OUTSIDE OF
yy TEMPO]-VAULT CONC.AF14'AAY VVJM VP, _• _ THE VAULT.
4 TEMPORARY VAULT 00 Wp
(: x LATERAL TAP MIRI POS-2 PHASE CONTPAROSTO RETURN ASTER LINE QEW
t ,S (BI ELBOW KIT.JIRO pBMin AL
P BOW (MI DUST COVERS TO REMOVE THE VAULT,SACKFILLWRN
NOTE'.REMOVE GUTS FROM VAMT AND 'TM1 4AX0/GMVNAND MAKE NMDSURFACE
w R u[aµ t ABANDON EXISCABLES OUTSIDE OF e(FiN REPAIRS.
gRAI 1TPW Rcw.n' IE THE VAUL.TiTHE CIVIL CONTRACTOR Wit
K AI'MBT ' RETURN TO PEMtiv£VM1UIT.
W l� 011, a roc 2m vn]]n iv
AP]2N ,fit 1 W ABc„x
P+Nftm
wa A{3.14210, TB,o
,uu S_
yiM1 Nr/A tc man
I,m , W��ABC 225 2710 tl
/ �.. v W t
10 AS
W 1.z..
VF]M
' x y,-aW ,eN
WA,PD44/0. PDune \
in,.
fli PL.Ins' PI ELBOW NM MIO CABLE.Xx AL
Inset iemcvu: J ML n 7.110 TIISN L�4 _..
IMI1n WF160T WTAP 1]1 ELBOW NUT-xm CABLE-nAL a' N. OfVbf]1ON FROM THISDESIGN MUST
ME PVC CONDOR UNIT ,m \pBOMY APPROVED BY SHE PG,PROJECT MANASER
Remo„ IN, PoM]�E
tOtrDtri
I]1 MOO P1DDTUO TK r,w q, EP.r 111 nfOSf301710
NJI PVC CONDUIT UNIT uw_vmlm rowuawwua.
4_...,—•— WLI M-Men: THINK 8�'
NmIL SAFETY RP,pu EIBOW KII-JK]D GBLE-nAL ru \IRS j NLnwr cum um
FUwaaaawr
(SIN-ROW KIT-J1[TD CAKE-R.LL TO avOunr Vrum aol.vsnra rxAIIAEON 4.wMBrN
OM,1,1071n[AWN Nroeau Wowsr FiYwRPRBH
PIA 00.10RWAINKMNNas
,MMABC ASJEAlWR�CA IH Es V,�[d To.,l0PPE[rE0
u lel If+�II� 110 NE
1 a Gene N'Fmm.n: Dor
ma 77e n IEVIOM R.us
SONAN IRNMIn CEESNiFR: {o
rou ivIrto2a IIn.PB I 1070001 I IO]fO0IN5 I MMBxxl4
pil ABC 11M N1 Tr11C a SOMNTS Of]B UO ENNO INST ST VETO RPLOTNIL�CMOON
vt 'rOIY] \ MeiPMTANDTTND 11Ta2Y
3 / a a
FIR LOOP ilyM Oil]
ABC 3gy1,3 n y N... S5OL sn v044111R�0Ovx 0245.Mo.W pew
'I AnriC/4i EIIII0 I APE2
D ' EA 1oDEM I4 rub OWA I , N .... v iwnM.w�c rcc E,r.50?9A Ms NIL9 WANNX
VICINITY MAP 577-PGE SWITCH VAULT
NOTES
n 1ii'T' 1.VAULTS TO BE
11 I ,1_ SET AT LOCATIONS
3 3� �1- NI lI _ APPROVED BY PGE
_1 1
Y.tOP OF LIO TO
�i BE SET AT FINAL
N441§,k
GRADE
APPROVED BY PGE
.„.
3 DO NOT CROSS
" 1■■11 VAC BETWEEN
f sw re '. 0 a,, VAULTS
swP„s, T
e ca36U3TT6HdWSl ��.. d INSTALL 500 LB
` m ® / I WONT TEST PULL
1,. - p _Oj STRING IN EACH PVC
f c P' 0 V/
q0 - Ir cocoon soY4S.,I
e sw 33474,I, i T 5 1 'R
50WMs Esn,MERE G S 1 ,,-a; 4 8' I,•31
sw Senaburp FMNROan,Eae Japan,M ,-roSEsrt yd'dTINVS
} Nafl.Esn(TPaiY001.NO IIOV .r contriCucrs .. ,C^c•...V�-^ Fr CONDOR TO PT
,. and the GIS User Community;.
PRIMARY CABLE& CONDUIT TABLE
EOIIaNT MOMS"LASS ALUITNIOrA,ION
1 000109 T@ COY lain ENGIN MULL MITI CAME MOWN IENGTM
IL) _ESL.II ARWI UY DEIGN ATTUM I'�" COAp`la
I.HA To MO IN (0) OW SYRGTNT* ITV (l) NOTES
P.1075 VTT31 d' 3 1%' ET 1D3a 132A111RT3 330'
._VT-31 P6 MS C' 1 133' S ET 33 M.MT TY II5' ._
VT.31 VETS” a' 1 MN' 14 139 a3,LL JOT IX 330
Tate ITN
Sot EDS' Tb'
DEVIATION FRO,rill DES/Gr,
AFPNOVW BY THE POE PROJECT MA',
44.sm AMON NM 0,4
/THIN\ "„�."; .o,,.,.o
SAFETY wa°sa°'o
\IRs j " ,.e.,.o..mnR., �..m f':'4a"o....,oaNa
�„,—..al`1jr,r" UNsea.3.h
Nee ce..IRumen hall
.>aa.I ,0cnrnapx1M,,yu,, GPPGCRI
.... L
G3,.m Eoa.m. Dal..
44.444.4444.4
TO F'm mEn ma+V: I. OSSA).9.1DEWIER:
1L1R03 �1[e1.50111 'NMI00. 11(WC01N5 I Ep
MI3TM
\ RM1 M up 3.C 3 SOTs CX Il 0M rye,
➢ ,5 LOMB.3Me0 VI
Ii
...s....vµ WEST
HIIORW WDE. T •u. u1I0 II
\ TIeIS,TIR LOOP TIGARD0151
ll
/sn.--,,. A .E:,o„e`c aswNea nn,
a..,.ao V.u.
wuSnVI6TOI l cnol0 '
NI 6 0R REE
D we wl.wwwIRars w53
Page 84 2011 Edition
Stationary Lane Closure with Flagging Diagram 320
Diagram 320 covers total closure of one lane of a two-lane, two-way
roadway. See the detail inset for the layout if using a single flagger to control
both directions of traffic on low volume roads(less than 400 ADT)with good
sight distance as discussed below.
1. Use truck-mounted flashing warning lights on work and protection
vehicles. See Section 4.3—Lights and Lighted Signs for exceptions.
2. For added visibility, a truck-mounted arrow board or PCMS in caution
mode may be used.
3. Flaggers at each approach are required if any of the following
conditions exist:
a. Night Operations.
b. Work space is over 200 feet in length.
c. Sight distance is less than 750 feet from each approach
through the lane closure.
d. Traffic volumes are greater than 400 ADT.
4. The length between the Flagger Ahead signs shall not exceed one
mile. Use Diagram 340—Lane Closure with Pilot Car if exceeding one
mile.
5. Cones should be used to outline the work space when curves or other
roadway alignments prevent clear direction for the motorists to pass
the work space safely.
6. Cones along the work space are recommended when posted speeds
are 45 mph or greater, when working under heavy traffic or when travel
lanes are narrower than 11 feet.
7. Extended queue signing (see Diagram 5-4) should be used when
traffic queues extend beyond the initial advance warning sign.
8. When flagging near an intersection, the"Flagger Ahead" (CW23-2)
sign should be visible to traffic entering from any side road. Additional
advance warning and Flagger Ahead symbol signs may be placed on
the side road(s).
9. Sign set-up and flagger placement shown may be used for intermittent
full road closures of 20 minutes or less.
10. The"ONE LANE ROAD AHEAD" (W20-4) sign is optional and should
be considered on high volume or high speed roads, or when extended
queues are expected.
Chapter 5 December 2011
2011 Edition Page 85
Stationary Lane Closure with Flagging Diagram 320
�; \\ I o
s
m W A oh nO ` " 0
0o `
ca
03A 1 1 0
0
¢ m
„.:
4 <
• `
_ 1 •• 3.sa
I� A •• °E.
t
c. U
03
1 t • ^
. II
i s
0 ;® fig • m
0
a• i I tit ><i � ••
aE • Zi •
O '. € •
J < I ¢
LL Y e G a
O
N 1fJ V w¢y
C 1 -/. m m W O
fA + t YO •�• 1/ a
Y-
111 m1
Sign Spacing and Buffer Lengths(feet) 1 w 9 s c
Posted Spawn Between Signs Buffer V \ 522 u+ Q
Speed A B C Space V z0 ccSd O
20 50
25 100 100 100 75 I
30 _ 100
4¢¢
350 350 350
40 150 Oq
45 180 ¢3 '
50 500 500 500 210
55 i 250
December 2011 Chapter 5
www.invarion.com
Diversion into a Continuous Left Turn Lane Diagram 430
Diagram 430 shows work in the travel lane(s) next to a continuous two-way
left turn lane with one direction of traffic diverted into the continuous two-way
left turn lane.
1. Use truck-mounted flashing warning lights on work and protection
vehicles. See Section 4.3 — Lights and Lighted Signs for exceptions.
2. For added visibility, a truck-mounted arrow board or PCMS in caution
mode may be used.
3. When two or more travel lanes are reduced to a single lane before the
diversion, each lane shall be closed separately. Layout traffic control
according to ODOT Standard Drawing TM 852 for 5-lane sections.
4. A shifting taper (L/2) may be added in the diverted traffic direction
across the continuous two-way left turn lane (as shown). This option is
recommended when the speed is 45 mph or greater.
Sign Spacing and Buffer Lengths (feet)
Posted Spacing Between Signs Buffer
Speed A B C Space ERRATA:
20 50
25 100 100 100 75 _ Supplement Table
30 100
35 350 350 350 125 Updated: February 12,
40 150 2016
45 180 By:ODOT Traffic-Raodway
50 500 500 500 210 Section
55 250
Signs Spacing and Buffer Lengths (feet) Supplement
Posted Spacing Between Signs "Buffer"
Speed A B C Space
60 285
65 700 700 700 325
70 365
www.invarion.com
Diversion into a Continuous Left Turn Lane Diagram 430
ROAD
WORK
AHEAD
B 4 y t
CENTER
LANE
CLOSED �
AHEAD
A
r
L/2
r
1
Buffer
4 Protection Vehicle
w/TMA(both Optional)
See Chapter 4
. .IIIII
Buffer
• 0
C L/2
• 0
1. I •
0
L/2 0 A
0 M
0
•
4 t
ROAD
WORK
AHEAD
www.invarion.com
Shoulder Work w/ Minor Road Encroachment Diagram 300
Use this detail for non-freeway work which extends into a travel lane and
maintains a minimum 10 foot travel lane. If a minimum 10 foot travel lane
can not be maintained, or when traffic can not safely pass by in both lanes
simultaneously, use the appropriate lane closure diagrams — for example,
Diagrams 310 through 350.
A lane closure may be appropriate for conditions such as high traffic
volumes, high speeds, and inadequate approach sight distance to the work
space, or heavy equipment adjacent to the travel lane.
1 . Use truck-mounted flashing warning lights on work and protection
vehicles. See Section 4.3 — Lights and Lighted Signs for exceptions.
2. For added visibility, a truck-mounted arrow board or PCMS in caution
mode may be used.
3. Cones shall be placed along the entire length of the work space. If a
protection vehicle is used and work is in place one hour or less, the
taper and tangent devices may be omitted.
4. If the speed is 45 mph or higher, volumes exceed 2000 ADT, or there
is limited sight distance, consider placing cones or tubular markers on
centerline.
5. An arrow board in caution mode or truck-mounted PCMS with
"SHOULDER WORK" or other appropriate message may be used for
higher visibility.
Sign Spacing and Buffer Lengths(feet)
Posted 4, ing"ffettegeftZlgITS"'"13011fi
Speed A B C Space !ERRATA:
20 50
25 100 100 100 75 Supplement Table
30 100
40 350 350 350 150 Updated:February 12,
2016
45 180 By:ODOT Traffic.Raodway
50 500 500 500 210 Section
55 250
Signs Spacing and Buffer Lengths (feet) Supplement
Posted Spacing Between Signs "Buffer"
Speed A ,..� 8_.,v..,, C Space
60 285
E5 700 700 700 325
70 365
www.invarion.com
Shoulder Work w/ Minor Road Encroachment Diagram 300
ROAD 4
WORK to
AHEAD
0
Initial
Warning A o
Sign I
0
O 1
0
(Optional) I 0
• •
O '
• •
O —
Protection Vehicle O V\
w/TMA(both Optional) 1
See Chapter 4 Buffer
`d S
0
10' 0
minimum o L/3
0
A
A
ROAD
NARROWS
B
ROAD
' ' '
WORK
AHEAD
Page 52 2011 Edition
Bicycle and Pedestrian Accommodation Diagrams
The following practices and details address the accommodation of bicycles
and pedestrians within work zones. The following detail drawings should be
incorporated, where appropriate, into the traffic control plan for any short
term work.
1. See Section 1.6— Bicycle and Pedestrian Considerations for additional
guidance.
2. Stay alert for pedestrians and bicycle traffic and accommodate safe
passage for them, as needed.
3. The work space should be protected from bicycle and pedestrian
intrusion by using barricades or closely-spaced channelizing devices.
4. Maintain access to transit stops or clearly close a transit stop using
barricades or channelizing devices.
Bicycle Accommodation Diagram 5-6
Bicycle Accommodation Principles:
1. If a significant volume of bicycles can be expected and work closes a
marked bicycle facility, or requires bicycles to share a travel lane,
install a"(Bicycle) ON ROADWAY" sign (CW11-1)or the Bicycle
symbol (W11-1) sign with an "ON ROADWAY" (OBW1-5) rider, in
advance of the work area.
2. Install temporary signing off the paved shoulder, within the planter
(buffer) strip, or share the width needed between the shoulder and the
sidewalk, as available.
3. Signs are to remain in place until the surface is restored and the width
made available for bicycle use. See Diagram 5-6 for typical bicycle
signing placement.
Sign Spacing and Buffer Lengths(feet)
Posted Spitting Between Sins I"Buffer"
Speed A B C . Span
20 S0
25 100 100 100 75
30 100
35 125
350 350 350
40 150
45 180
50 500 500 500 210
55 250
60 285
65 700 700 700 325
70 365
Chapter 5 September 2016
2011 Edition Page 53
Bicycle Accommodation Diagram 5-6
NOTES:
• Bicycles on Roadway(CW11-1)sign should not
interrupt standard sequences. For example:
o BE PREPARED TO STOP/Flagger Symbol
o _LANE CLOSED AHEAD/Lane Ends
Symbol
. Bicycles on Roadway sign typically follows ROAD
WORK AHEAD sign and used as general warning.
Tfr
A
ON
B
ROADWAY
C
ROAD
WORK
AHEAD
September 2016 Chap:cr 5
Page 54 2011 Edition
Pedestrian Accommodation Diagrams
See Diagrams 5-7 and 5-8, below, for pedestrian accommodations in work
zones.
Pedestrian Accommodation Principles:
1. If the work impacts the sidewalk or pedestrian facility, provide a safe,
accessible path, where practical, in accordance with the requirements
of the ADA.
2. If not practical to match the width of the existing pedestrian facilities,
maintain a 4-ft minimum width.
3. Unless a reasonably safe route can be provided through the work
space, pedestrians should be appropriately directed with advance
signing to cross the road. Do not divert pedestrians into travel lanes.
4. Install pedestrian closure or detour signing on Type II barricades.
Make every practical effort to satisfy the following:
• If work closes a sidewalk or sidewalk ramp, close sidewalks at a point
where an alternate crossing point or route can be provided. Minimize
the amount of out-of-direction travel for pedestrians.
• Use a combination of"SIDEWALK CLOSED" (R9-9), "SIDEWALK
CLOSED USE OTHER SIDE" (R9-10), "SIDEWALK CLOSED AHEAD
CROSS HERE" (R9-11), and"SIDEWALK CLOSED CROSS HERE"
(R9-11a) signing to direct pedestrians to an alternate facility.
• Where there are business destinations between the nearest crosswalk
and the work area, close the sidewalk at the business access nearest
the work area, where practical using the SIDEWALK CLOSED sign.
Include the SIDEWALK CLOSED AHEAD CROSS HERE sign at the
nearest crosswalk prior to the closure.
F-
Chapter 5 September 2016
2011 Edition Page 55
Pedestrian Accommodation, Mid-Block Diagram 5-7
The sidewalk should be closed at the nearest intersection on each side of the
work area when a safe, ADA-compliant path through the work area is not
available.
J
I610EWNK CLOSED SIDEWALK CLOSED
, �-� Or AHEAD
/ CROSS HERE -i
CROSS IERE
24x12 24x18
TYPe"W1°
(Mount on B(II)L) Type'W1"
SIDEWALK
CLOSED
24x12
Type.W1
(Mount on B(II)LR)
(2 Regd.)
\ ; OSEO SIDEWALK CLOSED
or ALEw
CROSS HERE
CROSS HERE
24x12 24x18
Type'W1' Type"W1„
(Mount on B(II)R)
September 2016 Chapter 5
Page 56 2011 Edition
Pedestrian Accommodation, Intersection Diagram 5-8
For work near an intersection, close crosswalks and/or sidewalks as
necessary when safe passage cannot be maintained.
SIDEWALK CLOSED
use OTHER SIDE
24x12
Type"W 1"
(Mount on B(II)LR)
ROAD
WORK .\
AHEAD \\vS_
(Optional) /// L
S'lDEWALKCLOSED
SIDEWALK CLOSED CROSS HERE
use OTHER SIDE SIDEWALK 24x12
24x12 CLOSED B1'
(Mountunt on on B(II)LR)
Type"WI'' 24x12
(Mount on B(II)LR) Type"W1'
(Mount on B(II)LR)
CC SIDEWALK CLOSED
D � 41EAD
.4111
C'- CROSS HERE
24x18
Tc
Type'W1'
(Mounton B(11)R)
H
/ROAD .
WORK
AHEAD/
(Optional)
Chapter 5 September 2016