Report (21) Oregon Residential Specialty Code N1107.2
HIGH—EFFICIENCY INTERIOR LIGHTING SYSTEMS
Permit No.: Jurisdiction:
Z e 14- c 1X17
Site Address:
Subdivision/Lot#:
and/or
Map and Tax Lot#: l
By my signature below, I certify that all of the permanently installed lighting fixtures in the
above mentioned building contain high-efficacy lamps. Screw-in compact fluorescent and LED
lamps comply with this requirement. (Oregon Residential Specialty Code N1107.2)1
Signature: Date:
Own r/General Contractor/Authorized Agent
Print Name: 4r1 0
'ORSC Section N1107.2.High-efficacy lamps. All permanently installed lighting fixtures shall contain high-
efficacy lamps. Screw-in compact fluorescent and LED lamps comply with this requirement.
The building official shall be notified in writing at the final inspection that the permanently installed lighting fixtures
have met this requirement.
Exception: Two permanently installed lighting fixtures are not required to have high-efficacy lamps.
I:\Building\Forms\RES-HighEfficiencyLightingAcknowledgement_022018
Oregon Residential Specialty Code R408.1
OISTURE BARRIER ACKNOWLEDGEMENT FORM
I, , am the general contractor or the owner-builder
at the following address:
Site Address: cil
s,...., c - - --
City: •-.)--.,
Permit#:
Subdivision/Lot#: ,/O
and/or �`"
Map and Tax Lot#:
To conform with the 2017 Oregon Residential Specialty Code(ORSC), Section R408.1
Ventilation. I am notifying the building official that I have installed the Moisture Barrier as per
Requirement in ORSC Section 408.1 and have taken the following steps to meet this code
requirement:
The ground surface of the under-floor space is covered by a Class I vapor retarder or
11 other approved materials,with
\r. Joints lapped 12 inches at seams and
,12,1"Extending up the foundation walls 12 inches.
Signature: _ ..� Date: —���
General ontractor or Owner-Builder
u lder
I:\Building\Form\RES-MoistureBarrierAcknowledgement_022018
Oregon Residential Specialty Code 8318.2
MOISTURE CONTENT ACKNOWLEDGEMENT FORM
I, , am the general contractor or the owner-builder
at the foll wing address:
Site Address:
OA"--
City:
-1',6
Permit#:
rt.SI-- ouol 7Z
Subdivision/Lot#:
.543
and/or
Map and Tax Lot#:
/Dar/
To conform with the 2017 Oregon Residential Specialty Code (ORSC), Section R318.2 and
OAR 918-480-0140, I am notifying the building official that I am aware of the moisture content
Requirement of ORSC Section R318.2 and have taken steps to meet this code requirement.
[Section R318.2 is provided for reference].
R318.2 Moisture Content: Prior to the installation of interior finishes, the building
official shall be notified in writing by the general contractor that all moisture-sensitive
wood framing members use. in construction have a moisture content of not more than 19
percent by dry weight o .. framing members.
Signature: Date: _ r
Gen- .1' ntractoror S wner-Builder
I:\Building\Form\RES-MoistureContentAcknowledgement_022018