Report (43) Simplex TrueAlert® Multi-Candela Notification Appliances
UL, ULC, CSFM Listed; PP
FM Approved; Visible Notification Appliances with Synchronized Flash;
MEA (NYC)Acceptance* Non-Addressable, SmartSyncTM Operation Compatible
RECEIVE ,k „ „,
Features
Visible only(V/O)24 VDC notification app '
with high output xenon strobe, available fdafl 6 2016 ��'
or ceiling mount: 41
CITY OF TIGAR p-
• UL listed to Standard 1971
`
•
Intensity is selectable as 15,30,75,or l (VJIRINGt
!
visible selection jumper secured behind strobe housing
• Operation is compatible with ADA requirements(refer ��
to important installation information on a e
p g ) l � 1
3
• Polarized input allows connection to compatible reverse
polarity,supervised notification appliance circuit(NAC) Wall Mount Strobes
• Regulated circuit design ensures consistent flash output
and provides controlled inrush current,Utr&N'24.1 FIRE
• Rugged,high impact,flame retardant thermoplastic
housings are available in red or white with clear lens
Strobes provide synchronized flash for use with:
• 4006,4008,4010,and 4100U Series fire alarm control
panels with NACs selected to provide strobe Ceiling Mount Strobes
synchronization or SmartSync two-wire control** Descri•tion
• 4009 IDNetTM NAC Extenders
• Separate strobe Synchronization Modules that are Multi-Candela TrueAlert synchronized strobes
provide convenient installation to standard electrical
available for Class B or Class A operation boxes.The enclosure designs are both impact and vandal
• Separate SmartSync Control Modules(SCMs)that resistant and provide a convenient strobe intensity
selection. Since each model can be selected for intensity
provide Class B or Class A output from conventional
NAC inputs output,on-site model inventory is minimized and changes
Strobe housings provides flexible, easy, and encountered during construction can be easily
accommodated.
convenient semi-flush or surface wall mounting:
• Rear of housing does not extend into box Wall mount strobe housings are a one-piece assembly
(including lens)that mounts to a single or double gang,or
• Wall mount strobes easily mount to single gang,double 4"square standard electrical box.The cover can be
gang,or 4-inch square outlet box quickly removed(a tool is required)and covers are
• Ceiling mount strobes mount to single gang boxes available separately for color conversion.
Wall mount strobe features: Ceiling mount strobes install using standard single gang
• Wiring terminals are accessible from the front of the electrical boxes. Color choice is determined by model
number.
housing providing easy access for installation,
inspection,and testing Strobe Intensit Selection
• Covers are available separately to convert housingcolor
During installation,a selection plug at the back of the
housing determines the desired strobe intensity.An
Optional adapters and wire guards:
• Wall mount strobe adapters are available to cover attached flag with black letters on a highly visible yellow
bacsurface mounted electrical boxes and to adapt to side of the strobe alllens.the selected intensity to be seen at the
Simplex®2975-9145 boxes p side of the
• UL listed red wire guards are available for wall or Strobe Application Reference
ceiling mount strobes Proper selection of visible notification is dependent on
occupancy,location,local codes,and proper applications
This product has been approved by the California State Fire Marshal(CSFM)pursuant to of: the National Fire Alarm Code(NFPA 72),ANSI
A117.1;the appropriate model building code:BOLA,
Section 13144.1 of the California Health and Safety Code,See CSFM Listing
7125-0026:316 for allowable values and/or conditions concerning material presented in ICBO,or SBCCI;and the application guidelines of the
this document.Itis subject to re-examination,revision,and possible cancellation,Refer to
page 2 for listing status of wire guards.Additional listings may be applicable;contact your Americans with Disabilities Act(ADA).
local Simplex product supplier for the latest status.Listings and approvals under Simplex ** Simplex multi-candela SmartSync two-wire horn/strobe appliance operation is protected
Time Recorder Co.are the property of Tyco Safety Products Westminster. under one or more of the following U.S.Patent Numbers:5,559,492;5,622,427;5,865,527;
5,886,620;6,281,789;6,954,137;7,005,971;and 7,006,003.
S4906-0001-3 5/2008
Synchronized Strobes
SmartSync Control Sources
Multiple Strobes.When multiple strobes and their Class B SmartSync two-wire control is available
reflections can be seen from one location,synchronized from:
flashes reduce the probability of photo-sensitive reactions
as well as the annoyance and possible distraction of • 4006,4008,4100U,and 4010 Fire Alarm Control
Panels(refer to individual product data sheets for more
random flashing.These multi candela strobes are
synchronized over a two-wire circuit when connected to information)
compatible NACs,to compatible Synchronized Flash • 4009 IDNet NAC Extender(refer to data sheet
Modules,or to SmartSyne Control Modules. 54009-0002)
• SmartSync Control Module(SCM)4905-9938(refer to
SmartSync Two-Wire Control data sheet S4905-0003)
Some applications desire the audible notification Class A SmartSync two-wire control is available
appliances to be capable of being silenced before the from 4100U NACs and from the 4905-9938 SCM.
alarm condition is reset(on-until-silenced)while the
visible notification appliances are kept activated until the Additional SmartSync compatible notification
alarm condition is reset(on-until-reset).SmartSync
appliances include separate horns and combination
operation mode provides this function using a single horn/strobe notification appliances.
circuit(two-wire operation).
Product Selection
Multi-Candela Visible Notification Appliances(Strobes)
Model Mounting Housing Color 'FIRE"Lettering Description
4906-9101 Red White
4906-9103 Wall
White Red Multi-candela strobe with intensity selectable as:
4906-9102 Red White 15,30,75,or 110 candela;synchronized flash rate;
Red SmartSync two-wire control compatible
4906-9104 Ceiling
White
Wall Mount Strobe Adapters
Model Description
Dimensions
4905-9937 Red Surface Mount Adapter Skirt;use to cover 1-1/2"(38 mm) 5-318"H x 5-114"W x 1-5/8"D
4905-9940 White deep surface mounted boxes ( mm x 133 mm x 41 mm)
Total depth with strobe=4-3/8"(111 mm)
4905-9931 Red Adapter Plate for mounting to Simplex 2975-9145 box(typically for 8-5/16"x 5-3/4"x 0.060"Thick
retrofit,may be mounted vertical or horizontal) (211 mm x 146 mm x 1.5 mm)
2975-9145 Red Mounting Box,requires Adapter Plate 4905-9931 7-7/8"x 5-1/8"x 2-3/4"D
(200 mm x 130 mm x 70 mm)
Ceiling Mount Strobe Adapter
Model Description
Surface Mount Adapter Plate;zincplated;required for mountingto Dimensions
4905-9910Q 4-7/8"x 3-1/8"x 0.060"D
handy box;not needed when using 4905-9926 guard (124 mm x 79 mm x 1.5)
Synchronization Modules (refer to data sheet S4905-0003 for additional information)
Model Description
Dimensions
4905-9914 Class B Synchronized Flash Module;epoxy encapsulated with
in/out 18 AWG(0.82 mm2)wire leads,rated for 2 A NAC, 1-3/8"x 2-7/16"x 13/16"
4905-9922 Class A requires 10 mA for power (35 mm x 62 mm x 20 mm)
4905-9938 SmartSync Control Module with Class B or Class A output;mounts in 4"x 4-1/8"x 1-1/4"D
4"(102 mm)square box
(102 mm x 105 mm x 32 mm)
Replacement Covers and Guards
Model Description
4905-9992 Red cover with white"FIRE"lettering Dimensions
4905-9993 White cover with red"FIRE"lettering For Wall mount strobes 5-1/8"H x 5"W x 1-1/2"D
(130 mm x 127 mm x 38 mm)
4905-9961* Wall mount 6-1/16"H x 6-1/16"W x 3-1/8"D
Red wire guard with mounting plate,compatible with (154 mm x 154 mm x 79 mm)
4905-9926* Ceiling mount semi flush or surface mounted boxes 6-1/8"x 4-3/8"x 2-7/8"deep
(156 mm x 111 mm x 73 mm)
*UL listed by Space Age Electronics Inc.
2 S4906-0001-3 5/2008
d
Strobe S•ecifications
Wall Mount or Ceiling Mount, Common Specifications
Rated Voltage Range UL Listed Rating Regulated 24 VDC;see Note 1 below
ULC Listed Rating 20 VDC to 30 VDC per ULC S526-M878
Flash Rate 1 Hz
Synchronized NAC Loading Up to 35 synchronized strobes maximum per NAC
Temperature Range 32°to 122°F(0°to 50°C)
Humidity Range 10%to 93%,non-condensing at 100°F(38°C)
Connections Terminal blocks for 18 AWG to 12 AWG(0.82 mm2 to 3.31 mm2);two wires per
terminal for in/out wiring
Housing Dimensions(with lens) 5-1/8"H x 5"W x 2-3/4"D(130 mm x 127 mm x 70 mm)
Wall Maximum RMS Current Rating per 15 cd 30 cd 75 cd'
Mount Strobe Setting(see Note 2 below) 60 mA 110 cd
94 mA 186 mA 252 mA
Reference RMS Currents 18 VDC 53 mA 84 mA 165 mA
63 mA 124 mA
at other voltages 24 VDC 40 mA 164 mA
168 mA
Housing Dimensions(with lens) 4-3/4"L x 2-5/16"W x 2-5/8"D(121 mm x 75 mm x 67 mm)
Ceiling Maximum RMS Current Rating per 15 Cd'' 30 cd 75 cd
Mount Strobe Setting(see Note 2 below) 75 mA 110 Cd
125 mA 233 mA 316 mA
Reference RMS Currents 18 VDC 67 mA 111 mA 207 mA
at other voltages; 24 VDC 50 mA 21'mA
83 mA 155 mA 211'mA
NOTES:
1. "Regulated 24 VDC"refers to the voltage range of 16 to 33 VDC per UL Standard 1971,Signaling Devices for the Hearing
Impaired,changes effective May 1,2004.This voltage range is the absolute operating range.Operation outside of this range
may cause permanent damage to the strobe.Please note that 16 VDC is the lowest operating voltage that is allowed at the last
appliance on the NAC under worst case conditions.
2. The maximum RMS current listed is the device nameplate rating.Strobe designs are constant wattage and the maximum RMS
current rating occurs at the lowest allowable operating voltage.(RMS is root mean square and refers to the effective value of a
varying current waveform.)
Installation Reference, Surface or Semi-Flush Wall Mounting
Mounting is compatible with ir, lror )
o o\single gang,double gang,and ) �l
4"(102 mm)square boxes, _ = _ /
i '
1-1/2"(38 mm)deep,by others �.[o1 ) /° 7 °( ti /
o
� � �� IMPORTANT!WALL MOUNT
( _ , \:� (Liqq INSTALLATION HEIGHT REFERENCE
// 1lJ' I� BottomoflensOOQUte ( iseitherevenWiring access hole7.
iO �. % with,orslightlyElectrical® � 1,44,1\
�, ` above bottom I box outline
�• / of compatibleII
Wiring terminals 46 thhli W.J. boxes
Imo" iei
Mounting Holes:
�.a�� O z ,: 4"square(4)
.0.11161 NFPA 72 requires 80"(2.03 m)
Single gang(2) that the entire lens minimum
01111°, Double gang(3) be not less than
_f_i_
80"and not greater
than 96"above the
Transparent housing finished floor
and lens assembly
Intensity selection
plug,accessible only
- from rear of housing; Lis I •
factory setting is 15 cd
Removable cover Strobe intensity
(tool required) viewing slot
3 S4906-0001-3 5/2008
r Ceiling Mount Strobe Installation Reference
/ Handy box,1-1/2"(38 mm)deep
Single gang box(Wiremold (RACO 650 or equal)or single gang
V5744S)2-1/4"(57 mm) box,2-1/2"(64 mm)deep(RACO 519
deep,supplied by others or equal)supplied by others
/' Also can be attached to boxes
/`r"" /,./ mounted to drop ceiling T-bar with
(l ( 1 ( 1 clips(ERICO No.512 or equal)
�/ �J / 4905-9910 Adapter Plate,required for
,,, os, (using
surface mount with handy box unless
the 4905-9926 wire guard
I" ' i -I
Ceiling mount strobe
oh l IF -5)
E i �. I Optional 4905-9926 wire guard
l _ :111.i, with mounting plate
!. ,__ i ....... ,,,,,:ji,
' Strobe intensity
VA ki
k 01 tAllihk viewing slot
l'tp,_ 11. itilire an t Intensity selection plug,
vitOW accessible only from rear of lens
i housing;factory setting is 15 cd
Wall Mount Installation Reference; Adapter Plate, Guard, and Adapter Skirt
Surface Mounting Reference
2975-9145 Box with Optional Adapterier Skirt
--n and Optional Wire Guard
-.. Surface mount conduit and f
0 box shown for reference
Ilii1I '���� __ 4"(102 mm)square
6.1-I-I-I�1I *�..�` ®°°M` box profile,1-1/2" f� -`•-
iII.IILI�I�Il i II (38 mm)deep .
___1.I_���11 0
O I Optional
4905-9961
__upI ' Wire Guard r''
14 FORE 7
Strobe -`-
[7.0mi _ -� 4905= 931 Adapter Plate
O t Optional Surface Mount Adapter Skirt,
4905-9961 Optional Wire Guard 1-1/2"deep:4905-9937,Red;
4905-9931 Adapter Plate (shown here for reference only, 4905-9940,White(conduit knockouts
can be used on other mounting options) are provided on all four sides)
Tyco is a registered trademark of Tco International Services GMBII and is used under license.Simplex,the Simplex logo,IDNet,TrueAlert,and SmartSync are trademarks of
Tyco International Ltd.and its affiliates and are used under license.NFPA 72 and National Fire Alarm Code are registered trademarks of the National Fire Protection
Association(NFPA).
El Simplex Tyco Safety Products Westminster•Westminster,MA•01441-0001•USA S4906-0001-3 5/2008
www.tycosafetyproducts-usa-wm.corn
3 2008 Tiro Safety Produces Westminster.A/l rights reserved.Allspecifications and other information shown were current as tfdocn m ent revision date and are subject to change without notice