Plans •
FeSZ0 (0- <3000 .
. 1 & ( °( sw 72 Love a.0o
COOPER Notification
Series CH Chimes and Chime Strobes
-
-- - i!
, r /
.r, .As
I 1= I Ft E 1 �, ,,,��.v,r iI
FIRE , f �s�-�` •
SERIES CH70 . ,,,__ SERIES CH70
CHIME STROBE SERIES CH90 SERIES CH90 CHIME
CHIME STROBE CHIME
•
Description Features
The Wheelock Series CH Chimes and Chime Strobes • Approvals include: UL Standard 1971, UL Standard 464,
minimize alarm system power supply requirements and New York City (MEA), and California State Fire Marshal
wiring costs with a low current draw and a patented chime (CSFM) and Chicago (BFP) See approvals by model in
mounting plate for fast, easy installation. Each model has Specifications and Ordering Information
a built -in level adjustment feature and an aesthetic two (2) ADA/NFPA/UFC /ANSI compliant
screw grille cover. Complies with OSHA 29 Part 1910.165
These unique solid -state chime appliances provide field
selectable single- stroke or vibrating operation with Anechoic • Wall mount models are available with Field
sound levels adjustable up to 83 dB and tone adjustable from Selectable Candela Settings of 15/30/75/110cd or
800 to 1200 Hz. 135/185cd (Multi- Candela models) or 1575cd (single •
Strobe options for wall mount models include 1575cd or
candela model)
Wheelock patented MCW multi- candela strobe with field • Ceiling mount models are available with field selectable
selectable candela settings of 15/30175/110cd or the high candela settings of 1 5/3 0/7 519 5cd or
intensity MCWH strobe with field selectable 135/185cd. 115/177cd (Multi - candela models)
Ceiling mount models are available in Wheelock patented nsation to ompe
Low current draw with temperature c
MCC multi - candela ceiling strobe with field selectable • reduce power aonsumption temperature
wiri cpts
intensities of 15/30/75/95cd or the high intensity MCCH strobe p
with field selectable 115/177cd. • Strobes produce 1 flash per second over the regulated
The strobe portion of all Series CH Chime Strobes may be voltage range .
synchronized when used in conjunction with the Wheelock • 24 VDC with wide UL "Regulated Voltage" using filtered
SM, DSM Sync Modules, Wheelock Power Supplies or other DC or unfiltered VRMS input voltage
manufacturers panels incorporating the Wheelock Patented ync Modules or panels
Sync Protocol. Wheelock's synchronized strobes offer an • Sy Synn c hrohronni ze using using the Wheelock S S yn Protocol
easy way to comply with ADA recommendations concerning
photosensitive epilepsy as well as meeting the requirements • Adjustable Volume and Tone Control
of NFPA72 and UFC. • Single Stroke or Vibrating Operation
The Series CH Chime Strobes are UL Listed for indoor, Fast Installation with IN/OUT screw terminals using #12 to
wall or ceiling mount applications under Standard 1971 #18 AWG wires
for Signaling Devices for the Hearing- Impaired and under
1 Standard 464 for Private Mode Audible Signal Appliances.
. They are available in two attractive package styles for flush
mounting to standard electrical boxes or convenient surface
mounting. All models include IN/OUT wiring terminations that •
accept two #12 to #18 AWG wires at each terminal. Inputs
are polarized for compatibility with industry standard reverse
polarity supervision.
woo
YryG v ..
• M EA t APPROVED
S5391 151 -92 -E 7125 -0785 151'
7135-0785:109 (Chime Only) •. - __ _ _ -, - _.
• t. •
• •
NOTE: All CAUTIONS and WARNINGS are identified by the symbol A. All warnings are printed in bold capital letters.
A WARNING: 'PLEASE READ THESE SPECIFICATIONS AND ASSOCIATED INSTALLATION INSTRUCTIONS CAREFULLY BEFORE USING, SPECIFYING OR
APPLYING THIS PRODUCT. VISIT WWW.000PERWHEELOCK.COM OR CONTACT COOPER WHEELOCK FOR THE CURRENT INSTALLATION INSTRUCTIONS.
FAILURE TO COMPLY WITH ANY OF THESE INSTRUCTIONS, CAUTIONS OR WARNINGS COULD RESULT IN IMPROPER APPLICATION, INSTALLATION AND /OR
OPERATION OF THESE PRODUCTS IN AN EMERGENCY SITUATION, WHICH COULD RESULT IN PROPERTY DAMAGE, AND SERIOUS INJURY OR DEATH TO YOU
ANDIOR OTHERS.
General Notes:
• Strobes are designed to flash at 1 flash per second minimum over their "Regulated Voltage Range ". Note that NFPA -72 specifies a flash rate of 1
to 2 flashes per second and ADA Guidelines specify a flash rate of 1 to 3 flashes per second.
• All candela ratings represent minimum effective Strobe intensity based on UL Standard 1971.
• Series NS Strobe products are listed under UL Standard 1971 for indoor use with a temperature range of 32 °F to 120 °F (0 °C to 49 °C) and
maximum humidity of 93% (± 2 %).
• Series NH horns are listed under UL Standard 464 for audible signal appliances (Indoor use only).
• "Regulated Voltage Range" is the newest terminology used by UL to identify the voltage range. Prior to this change UL used the
terminology "Listed Voltage Range ".
Table 1: Average RMS Current
CH70 Strobe current - Wall Mount CH90 Strobe current - Ceiling Mount
CH70/ Chime
CH90 241575W 24MCW 24MCWH 24MCC 24MCCH
Chimes current
•
1575cd 15cd 30cd 75cd 110cd 135cd 185cd 15cd 30cd 75cd 95cd 115cd 177cd
24 vdc 0.022 0.060 0.041 0.063 0.109 0.140 0.195 0.270 0.045 0.070 0.119 0.159 0.195 0.270
UL max* 0.022 0.090 0.060 0.092 0.165 0.220 0.300 0.420 0.065 0.105 0.189 0.249 0.300 0.420
Table 2: Chime dBA ratings * RMS current ratings are per UL average RMS
method. UL max current rating is the maximum RMS
d BA 10 ft current within the listed voltage range (16 -33v for 24v
Peak dBA @ reverberant units). For strobes the UL max current is usually at
CH70 /CH90 10 ft anechoic the minimum listed voltage (16v for 24v units). For
sound level Min Max audibles the max current is usually at the maximum
83 52 58 listed voltage (33v for 24v units). For unfiltered FWR
ratings, see installation instructions.
•
Application
1 The chimes are factory set in single stroke (SS) mode They can be changed to vibrating (VIB) mode with jumper on PC Board SINGLE STROKE OPERATION:
The minimum input pulse duration must be at least 160 ms 'on" time and 160 ms "off" time. The chime will only operate once each time it is pulsed. This mode is
recommended for coded systems. VIBRATING OPERATION: Continuous input voltage applied to the chime will activate the chime at one - second intervals.
2 The volume and tone controls have been adjusted at the factory to insure maximum dBA output. However, once the mode is selected, the installer may want to
fine -tune the signal to better suit the application.
3 Anechoic dBA is measured in an anechoic chamber with peak meter response. Reverberant dBA is rated per UL Standard 464.
4 Chime inrush current is 0 100 amps maximum with filtered DC input (0.140 amps with VRMS input voltage) with a time duration of 100 milliseconds.
•
•
•
•
•
•
•
. +. P
2 .
Wiring Diagrams"
SERIES CH CHIME & STROBE OPERATE INDEPEN- SERIES CH CHIME STROBES SYNCHRONIZED W/
DANTLY (NON -SYNC OR SYNC) MULTIPLE DSM MODULES
rRaa DSM 010
PRECEDIUG° + a PM XIV
APPLIANCE, AP PLIANCI9
{TMC Strobe HOC CS • Q } � [ 'I ��/
MODULE. -D -0 OR EoLRO 1 0
+ MEER SUPPLYO F❑ Note: Figure
OR PAM ' DSM 020
mom AO shows intercon-
IC
PRED: L".3 4- I r — — — — — — +E St Dbe NAC PI Ll {[�''� 1i�/ nection to strobe
APPLIANCE.O POSER v MODULE.] rl i r _ — — — — jRO OFO CO through sync —
R SDPPLm module. Chime
OR PAM] .� Q�� , ,� 7'] DSM 030 .� r�
�i�i r ❑
Strobe PAC C $ ■. M:II' lV:li7' portion requires 2
separate conduc-
STROBED CHIMED DSM Interconnecting wiring shown. Maximum of FACP.
(OPTIONAL) 0 twenty (20)0
SERIES CH CHIME STROBE APPLIANCES SERIES CH CHIME STROBE APPLIANCES & RSS
SYNCHRONIZED WITH DSM MODULE SINGLE STROBES SYNCHRONIZED WITH PS- 12/24 -8CP
"CLASS A PP and PS- 12/24 -8MP
DSM serves PS- 12 /29 -EMPO
WTPUTSO
.ear. l immi
FO 1 -40
TZ MEWL,
9 - CLASSO
- Aas.e.e I' 111 AD CLA
CHO EO LFtD
eDn MI In PO
DIP wrPlr.{{ wrrwea
SerLee PS-12/24 to
For wiring information on the PS- 24-8MC Power Supply, please refer to Data Sheet #8900.
Specifications and Ordering Information
Strobe Sync Model Model Agency Approvals
Model Number Order Wall Ceiling w/ SM, DSM Strobe 24 Mounting
Color Color
Code Mount Mount or Candela VDC RED White Options UL MEA CSFM BFP
PS -24 -8MC
CH70- 24MCW -FR 9018 X X 15/30/75/110 X X - L,O,P,Q,R,U,Y X X X X
CH70- 24MCW -FW 9019 X - X 15/30/75/110 X - X L,O,P,Q,R,U,Y X X_ X X
CH70- 24MCWH -FR 9083 X - X 135/185 X X - L,O,P;Q,R,U,Y X X X *
CH70- 24MCWH -FW 9084 X - X 135/185 X - X L,O,P,Q,R,U,Y X X X *
CH70- 241575W -FR 7830 X - X 15 (75 on Axis) X X - L,O,P,Q,R,U,Y X X X X
CH90- 24MCC -FW 3168 - X X 15/30/75/95 X - X Q,U,V X X X *
CH90- 24MCC -FR 3167 - X X 15/30/75/95 X X - Q,U,V X X X *
CH90- 24MCCH -FW 3110 - X X 115/177 X - X Q,U,V X X X
CH70 -24 -R 7825 X X - - X X - L,O,P,Q,R,U,Y X X X X .
CH70 -24 -W 7827 X X - - X - X L,O,P,Q,R,U,Y X X X X
CH90 -24 -W 7826 X X - - X - X Q,U,V X X X X
CH90 -24 -R 7828 X X - - X X - Q,U,V X X X X
Models are available in either Red or White. Call Customer Service for Order Code & Delivery. *PENDING
NOTE: Due to continuous development of our products, specifications and offerings are subject to change without notice
in accordance with Wheelock Inc. standard terms and conditions.
•
•
•
Architects and Engineers Specifications
The chime appliances shall be Wheelock Series CH Chimes and the chime strobe appliances shall be Wheelock Series CH Chime
Strobes or approved equals. The chime shall be UL Listed under Standard 464 for Audible Signal Appliances and chimes equipped
• with strobes shall be listed under UL Standard 1971 for Emergency Devices for the Hearing- Impaired. In addition, the strobes shall be
certified to meet the requirements of FCC Part 15, Class B and shall incorporate low temperature compensation to ensure the lowest
possible current consumption.
'All chimes shall use solid state components and shall provide field selectable single stroke or vibrating operation with volume control
,
and tone control. All models shall have a peak Anechoic sound output of 83 dB at 10 feet and an adjustable frequency range of 800 to
• 1200 Hz. All inputs shall employ terminals that accept #12 to #18 AWG wire sizes.
, •The strobe portion of the appliance shall produce a flash rate of one (1) flash per second over the Regulated Voltage Range and shall
incorporate a Xenon flashtube enclosed in a rugged Lexan® lens. The strobe shall be of low current design. Where Multi - Candela
Chime Strobes are specified, the strobe intensity shall have a minimum of four (4) field selectable settings and shall be rated per UL
'Standard 1971 at: 15/30/75/110cd or 135/185cd for wall mount and 15/30/75/95cd or 115/177cd for ceiling mount. The selector switch
for selecting the candela shall be tamper resistant and not accessible from the front of the appliance. The 1575 candela strobe shall be
specified when 15 candela UL Standard 1971 listing with 75 candela on -axis is required (e.g. ADA compliance).
When synchronization is required, the strobe portion of the appliance shall be compatible with Wheelock SM, DSM Sync Modules,
Wheelock Power Supplies or other manufacturers panels with built -in Wheelock Patented Sync Protocol. The strobes shall not drift out •
of synchronization at any time during operation. If the sync module or Power Supply fails to operate, (i.e., contacts remain closed), the
strobe shall revert to a non - synchronized flash rate.
The chime and the chime strobe appliances shall be designed for indoor surface or flush mounting. The chime and chime strobe shall
incorporate a chime mounting plate with a grille cover which is secured with two screws for a level, aesthetic finish and shall mount to
standard electrical hardware requiring no additional trimplate or adapter. •
All chime and chime strobe appliances shall be backward compatible. •
•
•
Member -
WE.ENCOURAGE AND SUPPORT NICET CERTIFICATION
3 YEAR WARRANTY
Made in USA
•
S0710 CH 10/07 • .
•
•
NJ Location FL Location VA Location V
273 Branchport Ave. 7565 Commerce Ct. P: 877- 459 -7726
Long Branch, NJ 07740 Sarasota, FL 34243. • F: 703- 294 -6560
P: 800-631-2148 V P: 941-487-2300
F: 732- 222 -8707 , F: 941 - 487 -2389 .
www.coopernotification.com
Cooper Notification is Wheelock' (Mk) SAFEPATM' WA � 10 COOPER Notification
•
[Page Too Large for OCR Processing]
[Page Too Large for OCR Processing]