Plans /�pa3 l/�� ~ j 5a
Dyna-Thread® �Pa aaB" — o of3
Full Line Sch -40 Replacement
Dyna - Thread offers the life expectancy of Sch-40 with superior hydraulics and greater value.
Dyna - Thread sprinkler pipe represents an engineering advancement for the sprinkler pipe industry. It combines the safety
and longevity of traditional Sch -40 pipe with quality and superior hydraulic advantages.
Comparison to Schedule.40 ; Comparison to L.W.T. Pipes
• Dyna- Thread's inside diameter is up • With its increased strength and lighter • More wall thickness at the thread
to 3.6% larger than Sch-40 giving it weight, Dyna- Thread reduces (CRR =1.00) gives Dyna - Thread
superior hydraulics. And, when used installation fatigue and is ideal for better life expectancy than lightwall
in combination with Dyna -Flow pipe retro -fit applications. threadable pipe joints.
down sizing often occurs.
Corrosion Resistance Ratio (CRR) is a • Unlike lightwall threadable pipe.
• Dyna - Thread is fully listed and UL (Underwriters Laboratory) term for Dyna - Thread has no thread gauge
approved by UL, ULC, and FM for the estimated life expectancy of a pipe warning.
fire sprinkler applications. joint. This is based on the calculated
• Dyna - Thread is approved for
• The life expectancy of Dyna - Thread wall thickness at the base of the first standard hanger spacing (15 ft.
exposed thread. assumed to be the
and Sch -40 are equal based on the 0.C.), can be used as earthquake
calculated wall thicknesses per UL. weakest point of the pipe length. Dyna sway bracing. and is safe to use as
Thread and Sch-40 have the same drops.
• The consistent quality of steel used to calculated wall thicknesses at this point
make Dyna - Thread facilitates smooth and are both assigned the same CRR of • Dyna - Thread is safer to weld ou.
threading and lower maintenance 1.00.
costs. y • Dyna - Thread is more widely
accepted than lightwall threadable
• The exterior of Dyna - Thread is The internal surface of all black Allied where Sch -40 is specified.
- protected by a clean, durable mill Tube & Conduit Fire Sprinkler pipe
coating for extended shelf life and products up to 4.5000" in diameter is
easy paint application. coated with our new Antibacterial
- Formula. "ABF". In scientific laboratory
test. ABS proved to have superior Specifications & • Approvals
resistance to microbial colonization of
® ® ® pipe walls, thereby delaying or possibly
preventing the onset of Super 40/Dyna- Thread pipe is
manufactured to meet: ASTM A -135,
Microbiologically Influenced corrosion Grade A and is in compliance with
Listed Approved Listed NFPA -13. All sizes of Super 40/Dyna-
(MIC) when the First Sprinkler System
is first installed. Thread are rated at 300 psi working
pressure. Super 40/Dyna- Thread is UL
and ULC Listed for wet, dry deluge and
$ peClf l Cat 1 o11S pre- action sprinkler systems and FM
NPS Nominal I.D. Wt. Wt. (H20 Filled) Pes/ Wt/Lift (21') WVLift (24') WI/Lift (25') Approved for use in wet systems. Super
In; mm In; mm Lbs/Ft; Kg /m Lbs/Ft; Kg /m Lift Lbs; Kg Lbs; Kg Lbs; Kg 40/Dyna- Thread can be "hot-dip"
1° 1.080 1.330 1.75 70 1955 2234 232 galvanized to meet FM requirement for
25 27.4 2.0 2.60 70 887 1013 105: dry systems. Super 40/Dyna- Thread is
1W 1.408 1.870 2.54 51 2002 2288 2384 approved for all threaded couplings and
32 35.8 2.8 3.78 51 908 1038 108 welded outlets and is suitable for all
1W 1.639 2.290 3.22 44 2115 2418 2519 roll - grooved, and plain -end fittings.
40 41.6 3.4 4,79 44 959 1097 114 (See listing information).
2" 2.104 3.050 4.57 30 1921 2196 228
50 53.4 4.5 6.80 30 871 996 103
tgca /F /ow Control �IIiecJ 16100 S. Lathrop • Harvey, IL 60426 Customer Service:
` , J 11350 Norcom Rd. • Philadelphia, PA 19154 (800) 882 -5543
TUBE & CONDUIT 2525 N. 27th Ave. • Phoenix, AZ 85009 Fax 708 -339 -1806
S3 - 3
Dyna-Flow®
High Strength Steel Pipe
The original high - strength lightwall sprinkler pipe with hydraulics superior to Schedule -10.
Dyna -Flow pipe is the "original" high- Specifications
strength lightwall sprinkler pipe. Dyna -
Flow has outstanding hydraulic NPS Nominal I.O. Wt. Wt. (H20 Filled) Pa/ Wt/Lift (21') Wt/LIft (24') Wt/Lilt (25')
capabilities and is recognized as the In; mm In; mm Lbs /Ft; Kg /m Lbs/Ft; Kg /m Lift Lbs; Kg Lbs: Kg Lbs; Kg
most popular alternative to Schedule -10 1° 1.191 0.830 1.31 91 1,586 1,812 1,888
pipe. Lightweight. easy to cut and easy 25 30.3 1.2 1.95 91 719 822 856
to handle for installation. Dyna -Flow is a 11/4° 1.536 1.059 1.87 61 1,356 1,550 1,615
valuable addition to any fire protection 32 39.0 1.6 2.78 61 615 703 733
system. 1W 1.728 1.667 2.71 61 2,135 2,440 2,542
Superior Hydraulics 40 43.9 2.5 4.03 61 968 1107 • 1153
2" 2.203 2.104 3.79 37 1,634 1,868 1,946
With an inside diameter of up to 11% 50 56.0 3.1 5.64 37 741 847 883
larger than Schedule -40 and up to 7% 2W 2.703 2.564 5.10 30 1,615 1,846 1,923
larger than Schedule -10, Dyna -Flow 65 68.7 3.8 7.59 30 733 837 872
pipe hydraulics are exceptional. Larger 3° 3.314 3.387 7.18 19 1,351 1,544 1,608
I.D.s enable Dyna -Flow, and related 80 84.2 5.0 10.69 19 613 700 729
components. to be down -sized within the 4 4.310 4.473 10.86 19 1,784 2,039 2,124
system, thus increasing the potential for 90 109.5 6.7 16.16 19 809 925 963
job cost savings. For complete Hazen -
Williams charts, refer to "Dyna -Flow
Hydraulic Data Tables."
Coatings & Fabrication Specifications & Approvals Additional Benefits
Dyna -Flow products are coated with Dyna -Flow /Super Flo pipe is manufac- • Lightweight and easy to install,
an environmentally approved and tured to meet ASTM A -795 Type E, resulting in more efficient use of your
specially formulated modified - acrylic or Grade A and is in compliance with freight and labor dollars.
water -based coating. This durable coating NFPA -13 and NFPA -14. All sizes of
is paintable. The black coating acts as Dyna Flow /Super Flo are UL Listed. FM • Provides stability needed to comply
an excellent primer and is resistant to Approved and ULC Listed. with standard hanger spacing
(15 ft O.C.) per NFPA.
weathering and U.V. degradation from
outdoor storage. 0 ® 410 • Available in Standard lengths for your
Metallurgical properties provide excellent Listed Approved Listed convenience, or can be ordered in
fabrication characteristics for end prep y p custom lengths upon approval.
Dyna-Flow/Super Flo is UL/ULC Listed
finishes, welding and roll grooving. for use with roll grooved, plain end • Fast cutting and welding. as well as
There is no special process or equipment couplings, and welded joints for wet. dry. easy roll grooving and end preparation.
needed for fabrication and installation. preaction and deluge systems. It is FM
• Available in Factory roll grooved form
The internal surface of all black Allied Approved for roll grooved, plain -end, and for quicker shop turnaround.
Tube & Conduit Fire Sprinkler pipe welded joints for wet systems. Refer to
products up to 4.5000" in diameter is appropriate documentation for up- to-date • Clean, durable mill coating provides
coated with our new Antibacterial listing and approval information. Dyna- longer "shelf life" and acts as an
Formula. "ABF ". In scientific laboratory Flow /Super Flo is now available "hot- excellent primer for custom paint
test. ABS proved to have superior dip" galvanized and has been specifically applications.
resistance to microbial colonization of approved by FM for dry systems uses.
pipe walls, thereby delaying or possibly
preventing the onset of Microhiologically
Influenced corrosion (M1C) when the
First Sprinkler System is first installed.
tz®e® /Flow Control 16100 S. Lathrop • Harvey, IL 60426 Customer Service:
T JIed 11350 Norcom Rd. • Philadelphia, PA 19154 (800) 882 -5543
TUBE & CONDUIT 2525 N. 27 th Ave. • Phoenix, AZ 85009 Fax 708 - 339 -1806
S2 - 3
VICO Fire & Building
Products
Technical Services: Tel: (800) 381 -9312 / Fax: (800) 791 -5500
Series TY -FRB — 2.8, 4.2, 5.6, and 8.0 K- factor
Upright, Pendent, and Recessed Pendent Sprinklers
Quick Response, Standard Coverage
General
tamed when exposed to corrosive at-
mospheres. Although corrosion resis- =;
Cant coated sprinklers have passed the -,
Description standard corrosion tests of the appli - ' = %,'` ` ' =
cable approval agencies, the testing is `v
The Tyco® Series TY -FRB, 2.8, 4.2, not representative of all possible cor-
5.6, and 8.0 K- factor, Upright and Pen- rosive atmospheres. Consequently, it ?-
dent Sprinklers described in this data is recommended that the end user be
sheet are quick response - standard consulted with respect to the suitability / '' ' - '.,
coverage, decorative 3 mm glass bulb of these coatings for any given corro- ;; , ,-t.'
type spray sprinklers designed for use c` — -- ,
9 slue environment. The effects of ambi- '�:..���� ` � ;�•�;�
in light or ordinary hazard, commercial;:
9 Y ent temperature, concentration of , �. >,,
—; , - -
occupancies such as banks, hotels, chemicals, and gas /chemical velocity, -
`
shopping malls, etc. should be considered, as a minimum,
The recessed version of the Series along with the corrosive nature of the
TY -FRB Pendent Sprinkler, where ap- to which the sprinklers will be
plicable, is intended for use in areas exposed. �
with a finished ceiling. It uses either a An intermediate level versions of the {,_ > °a —
two -piece Style 10 (1/2 inch NPT) or Series TY -FRB Pendent Sprinklers r , �
Style 40
are detailed in Technical Data Sheet ti
(3/4 inch NPT) ) Recessed Es- 1-,,
cutcheon with 1/2 inch (12,7 mm) of TFP356, and Sprinkler Guards are de- i = . i, s Ti
recessed adjustment or up to 3/4 inch tailed in Technical Data Sheet TFP780 ;� j: 1
(19,1 mm) of total adjustment from the
-
flush pendent position, or a two -piece WARNINGS ,
Style 20 (1/2 inch NPT) or Style 30 (3/4 The Series TY - FRB Sprinklers de
inch NPT) Recessed Escutcheon with scribed herein must be installed and
1/4 inch (6,4 mm) of recessed adjust maintained in compliance with this
ment or up to 1/2 inch (12,7 mm) of document, as well as with the applica-
total adjustment from the flush pen ble standards of the National Fire Pro -
dent position. The adjustment pro tection Association, in addition to the
vided by the Recessed Escutcheon re - standards of any other authorities hay- Model /Sprinkler
duces the accuracy to which the fixed ing jurisdiction. Failure to do so may
pipe drops to the sprinklers must be impair the performance of these de- Identification
cut. vices.
Corrosion resistant coatings, where The owner is responsible for maintain- Numbers
applicable, are utilized to extend the ing their fire protection system and de-
life of copper alloy sprinklers beyond vices in proper operating condition. TY1131 - Upright 2.8K, 1/2 "NPT
that which would otherwise be ob - The installing contractor or sprinkler TY1231 - Pendent 2.8K, 1/2 "NPT
manufacturer should be contacted TY2131 - Upright 4.2K, 1/2 "NPT
IMPORTANT with any questions. Pendent
TY3131 - Upright 5.6K, 1/2 "NPT
Always refer to Technical Data TY3231 - Pendent 5.6K, 1/2 "NPT
Sheet TFP700 for the "INSTALLER TY4131 - Upright 8.0K, 3/4 "NPT
WARNING" that provides cautions TY4231 - Pendent 8.0K, 3/4 "NPT
with respect to handling and instal- TY4831- Upright 8.0K, 1/2 "NPT
lation of sprinkler systems and corn- TY4931- Pendent 8.0K, 1/2 "NPT
ponents. Improper handling and in-
stallation can permanently damage
a sprinkler system or its compo-
nents and cause the sprinkler to fail
to operate in a fire situation or cause
it to operate prematurely.
Page 1 of 10 AUGUST, 2007 TFP171