Plans edw° 96 5a 9
ROOF COVERING - SYSTEMS I/6, y3 Ace L ,t5b
2:` • 3- or 4 -Plies "#501", " #802 ", " #803" or " #805 Panoply" base sheet, fully adhered
with " #705" Adhesive, or ASTM D 3019 cold process adhesive applied at a coverage
rate of 2 gal. /sq. each ply.
3. • Coated with " #705 Adhesive ", or ASTM D 3019 cold process adhesive, at 2 gal. /sq.
and embedded with 3M "Brand No. 11" roofing granules at a minimum coverage rate
of 80 lbs. /sq.
OR
• Coated with " #705 Adhesive ", or ASTM D 3019 cold process adhesive, at 4 gal. /sq.
and embedded with roofing gravel ballast at a minimum coverage rate of 400 lbs. /sq.
Comb. Deck
Slope: 2:12
1. Optional Insulations: Wood fiber, glass fiber, phenolic, perlite, or polyisocyanurate
insulation board. •
•
2. 1 -Ply " #501" or " #515" base sheet or inverted " #502" cap sheet, mechanically
fastened (optional when minimum A" insulation board is applied).
3. • 2- or 3 -Plies "#501" base sheet, " #500" or " #508" ply sheet, fully adhered with
ASTM D 312 roofing asphalt, hot mopped.
4. • 1 -Ply " #350" or " #502" cap sheet, fully adhered with ASTM D 312 roofing asphalt,
hot mopped. 1
s
Comb. Deck
Slope: 'b:12
1. Optional Insulations: Glass fiber, phenolic, perlite, polyisocyanurate, or composites of
these.
2. • 1 -Ply " #501 ", " #802 ", " #803" or " #605 Panoply" glass fibered base sheet,
mechanically fastened.
3. 1 -Ply " #919 Polyglass" cap sheet, fully adhered with ASTM D 312 Type III roofing
asphalt, hot mopped, or " #705" or ASTM D 3019 cold process adhesive.
4. Surfaced with "Malarkey" aluminum roof coating applied at a minimum coverage rate
of 1 fi gal. /sq.
Comb. Deck
Slope: Unlimited •
� r
1. Optional Insulations: Wood fiber, glass fiber, perlite, phenolic, or polyisocyanurate
insulation board.
2. •3- or 4 -Plies "#501", " #515 ", " #802 ", " #803" or " #805 Panoply" base sheet, fully
adhered each ply with ASTM D 312 roofing asphalt or " #705" adhesive or ASTM D
3019 cold process adhesive.
3. Flood coated with roofing asphalt or adhesive and embedded with nominal %" pea
gravel at a minimum coverage rate of 150 lbs. /sq.
4. Optional: "Heatshield" primer and rock bonder applied at a coverage rate of 1 gal. /sq.
5. Surfaced with "Heatshield" cementitious coating per manufacturers' instructions. F
1
Comb. Deck
Slope: 1:12 •
1. Minimum ''A" thick glass fiber, perlite, 'phenolic, or polyisocyanurate insulation board,
mechanically fastened.
_.
CI (}e -vsey Glass "
I Ww 4 ''
VIA o`1 cwk letic S
LOOK FOR THE MARK 553