Plans . ‘46 e,a2e . ' e23 7
426,70 skilled / .13/g/d Bid 2
I ntertek ETLSEMKO 312'
VytAf
, NZERTk -. 2005 Directory of Listed
Building Products
�CM
C � US
dr�ock Ne
Building Materials with Surface Burning Characteristics
0 ,0 ER
Bullet/Forced Entry Resistant Products
MI 11-•• Door and Frame Hardware
,ors
F Systems
�7J,/oC� xqt 9
'° Machining Distributors
-°. Ma1sT_actured Wood Products
Ppsitive Pressure Assemblies and Components
0 NTERTF it
Plumbing Products
�M Roof Covering Systems
Roof /Ceiling, Floor /Ceiling, Beam & Column Assemblies
C US Wall Assemblies
CrSTE0 Windstorm Resistant Products
//0/ ((r#
FIRE RESISTANT PRODUCTS & COMPONENTS
ROOF COVERING SYSTEMS (Cont'd) MALARKEY ROOFING CO. - Portland, OR USA ( Cont'd)
Comb. Deck
LOCKHEAD MISSILES & SPACE CO., INC. - Sunnyvale, CA USA (Cont'd) Slope: 1- 1/2:12 (AC-3)
CLASS "B" 1. Optional Insulations: Manufacturer specified, certified insulations.
Comb. Deck 2.1 Ply of "#1000 ESHA Vent®" self adhesive base sheet, glued.
Slope: 112:12 (BC-1) 3. 1 Ply of #161 APP° cap sheet, torched.
1. 1 -Ply ASTM -D2178 Type III ply sheet. Comb. Deck
2. 1 -Ply 2 mit aluminum foil. Slope: 1:12 (AC-4)
3. 1 -Ply ASTM -D4601 Type II base sheet, mechanically fastened simultaneously. 1. Optional Insulations: Manufacturer specified, certified insulations.
4. " "SB Elastomer", applied at a coverage rate of 4 galJsq. 2. 1 Ply of #501, "#503" or #515.
5. "1 -Ply of 'Rex 272 Polyester°, embedded per manufacturer's instructions. 3. 1 Ply of #159 APP, torched base sheet.
6. " "SB Elastomer", applied at a coverage rate of 4 galJsq. 4.1 Ply of #160 APP, torched base sheet.
7. 'Optional: "K -2 Elastomer", applied at a coverage rate of 1.5 gal. /sq. 5.2 Gallons of Aluminum Coating.
Comb. Deck Comb. Deck
Slope: 1/2:12 (BC-2) Slope: 1/2:12 (AC-5)
1. 1 -Ply ASTM -02178 Type III ply sheet. 1. Optional Insulations: Manufacturer specified, certified insulations.
2. 1 -Ply 2 mil. aluminum foil. 2. "1 -Ply "#501 ", "#503 ", "#515 ", "#602", "#603 ",#605 Panoply" base sheet, hot
3. 1 -Ply ASTM -D4601 Type II base sheet, mechanically fastened simultaneously. mopped, mechanically fastened.
4.'°SB Elastomer", applied at a coverage rate of 4 galJsq. 3.'1 -, 2 -, 3 -Plies of " #500°, "#506" ply sheets, hot mopped.
5. "1 -Ply of "Tltex 272 Polyester", embedded per manufacturer's instructions. 4. "1-Ply "#601 Premium" cap sheet, hot mopped.
6. " "SB Elastomer", applied at a coverage rate of 4 galJsq. Comb. Deck
7. "1 -Ply of "Titex 272 Polyester', embedded per manufacturer's instructions. Slope: Unlimited (AC-6)
8. " "SB Elastomer", applied at a coverage rate of 4 galJsq. 1. Optional Insulations: Manufacturer specified, certified insulations.
9. "Optional: "K -2 Elastomer", applied at a coverage rate of 1.5 gal. /sq. 2. ""#230" Alaskan SBS Modified Fiberglass Shingles, installed per
MAINTENANCE & REPAIR SYSTEM TO MAINTAIN THE EXISTING RATING manufacturer's instructions.
Comb. Deck Note: This system is ASTM -D3161 Wind Resistance rated up to 110 mph. In
Slope: Existing Slope (MRC -1) addition, it has been tested to UL -2218, and it has achieved a class 4 impact
1. Existing Roof System: Class A, B, C (for B.U.R. or modified bitumen systems resistance rating under criteria established by the Texas Department of Insurance.
with mineral granules or smooth surface). Comb. Deck
2. Optional: 1 layer of listed type G2 asphalt impregnated glass fiber felt, Slope: Unlimited (AC-7)
mechanically fastened, spot mopped or fully adhered with ASTM -0312 roofing 1. Optional Insulations: Manufacturer specified, certified insulations.
asphalt. 2. "#240 Hurricane" SBS Modified Fiberglass Shingles, installed per
3. " "EW- XRS -WP" applied at a minimum coverage rate of 1 gal. /sq. manufacturer's instructions.
4. 1 layer of polyester scrim or fiberglass reinforcement. Note: This system is ASTM -D3161 Wind Resistance rated up to 110 mph. In
5. " "EW- XRS -WP" applied at a minimum coverage rate of 1 gal. /sq. addition, it has been tested to UL -2218, and it has achiever? a class 4 impact
6. Optional: 1 layer of polyester scrim or fiberglass reinforcement. resistance rating under criteria established by the la - as Depart: - Gni of Insurance.
7. "Optional: "EW- XRS -WP" applied at a minimum coverage rate of 1 gal. /sq. Comb. Deck
. ,,,, 8. " "EW- XRS -RC" applied at a minimum coverage rate of 1 galJsq. Slope: 1/2:12 (AC-8)
i Comb. Deck 1. Optional Insulations: Manufacturer spr.A,,fie8 certified insulations.
Slope: 1/2 :12 (MRC -2) 2. "Optional: 1-Ply #501 ", " #503 ", "#602",';'#603 ", " #605" base sheet,
G 1. Existing Roof System: Class A, B, C, B.U.R. or modified bitument systems with mechanically attached or fully adhered with " #7b' $ASTM -1)3019 cold pro( ass
gravel surfacing (the loose gravel may be removed). adhesive, ASTM -0312 roofing asphalt, hot moppet•.) -ply " #1000 ESl i.'Ca. rte
2. Asphalt emulsion (ASTM- D1227) at a minimum coverage rate of 10 gal. /sq. self- adhesive base sheet. ,
3. " "EW- XRS -WP" applied at a minimum coverage rate of 1 gal. /sq. 3. "1 -Ply "#602", "#603", "#605" or 2 -Plies "#501" or "#50',' base sheet,
4. 1 layer of polyester scrim or fiberglass reinforcement. mechanically fastened or fully adhered with "#705 ", ASTM -D3019 cold process
5. " "EW- XRS -WP" applied at a minimum coverage rate of 1 gal. /sq. adhesive, ASTM -D312 roofing asphalt, hot mopped, 1 -Ply " #1000 ESHAvent®°
6. Optional: 1 layer of polyester scrim or fiberglass reinforcement. self - adhesive base sheet.
7. "Optional: "EW- XRS -WP" applied at a minimum coverage rate of 1 galJsq. 4. "1 -Ply "#601 Premium" cap sheet, fully adhered with ASTM -D3019 cold
8. " "EW- XRS -RC" applied at a minimum coverage rate of 1 galJsq. process adhesive, ASTM -D312 roofing asphalt, hot mopped.
Comb. Deck
L &L SUPPLIERS, INC. - Stockton, CA USA Slope: 1/2:12 (AC -9)
CLASS 'A', 'B', 'C' 1. Optional Insulations: Manufacturer specified, certified insulations.
Comb. Deck 2. "1 -, 2 -, 3 -Plies " #501° "#503",'#602 ", "#603 ", "#605 Panoply" base sheet,
Slope: 3:12 (ABCC -1) mechanically fastened, or fully adhered with ASTM -D312 roofing asphalt, hot
1. Surface Prepared per Manufacturer's Instructions. mopped.
2. "Heat Shield" coating spray applied in one coat at a rate of 14 lbs. of dry 3. "1 -Ply "#917 Polyglass" cap sheet, torched down or fully adhered with "#705 ",
powder per square. ASTM -03019 cold process adhesive, roofing asphalt, hot mopped.
Note: Application of this coating does not change the fire rating of a roofing Comb. Deck
' : system. Slope: 1/2:12 (AC -10)
1. Optional Insulations: Manufacturer specified, certified insulations.
MALARKEY ROOFING CO. - Portland, OR USA 2. '1 -, 2 -, 3 -Plies " #501 ", "#503 ", "#602", "#603 ", "#605 Panoply" base sheet,
CLASS "A" mechanically fastened, or fully adhered with ASTM -D312 roofing asphalt, hot
Com .. r _ . mopped.
Slope: 1/2:12 (AC -1) 3.1-Ply "#919 Polyglass" cap sheet, torched down or fully adhered with cold
1. Optional Insulations: Manufacturer specified, certified insulations. process adhesive or roofing asphalt, hot mopped.
2. Isocyanurate insulation board mechanically fastened. 4. Manufacturer specified water based emulsion coating meeting ASTM-D1 227
3. "1 -Ply "#501", "#503", "#508 °, "#515 ", "#602 ", "#603 ", "#605 Panoply", specifications.
mechanically fastened, fully adhered with ASTM -0312 roofing asphalt, " #1000 Comb. Deck
ESHAvent" self - adhesive base sheet. Slope: 1/2:12 (AC -11)
4.'1 -, 2 -, 3 -Plies "#500", "#506" ply sheet, "#501° or "#503" base sheet, hot 1. Optional Insulations: Manufacturer specified, certified insulations.
mopped. Coated with "Malarkey Asphalt", ASTM -D1227 asphalt emulsion at 4 2. "2 -, 3 -Plies "#501 ", °#503 ", "#602", "#603 ", "#605 Panoply" base sheet, fully
galJsq. adhered with ASTM -D312 roofing asphalt, hot mopped.
Comb. Deck 3. "1 -Ply "#601 Premium" cap sheet, fully adhered with ASTM -D312 roofing
Slope: 1:12 (AC -2) asphalt, hot mopped.
1. Optional Insulations: Manufacturer specified, certified insulations.
2.2 Plies of "#501", °#503" or °#515" base sheet (ASTM- D4601) mechanically
• attached.
• 3. 1 Ply of " #160 APP", torched.
• 4.2 Gallons per 100 sq./ft. of 7/726 Aluminum Coating" (per ASTM -D2824 Type
III).
-�i
,c+
335
FIRE RESISTANT PRODUCTS & COMPONENTS
ROOF COVERING SYSTEMS (Cont'd) MALARKEY ROOFING CO. - Portland, OR USA ( Cont'd)
Comb. Deck
MALARKEY ROOFING CO. - Portland, OR USA (Cont'd) Slope: N/A (AC -20)
Comb. Deck 1. Optional Insulations: Manufacturer specified, certified insulations.
Slope: 1/2.12 (AC -12) 2. "#210 PRO -25" SBS Modified Fiberglass Shingles, installed per
1. Optional Insulations: Manufacturer specified, certified insulations. manufacturer's instructions.
2. "1 -Ply °#501 ", "#503" fully adhered with ASTM -D312 roofing asphalt, hot Note: This system is ASTM -D3161 Wind Resistance rated up to 60 mph.
mopped. Comb. Deck
3. "2 -Plies "#603 ", fully adhered with ASTM -D312 roofing asphalt, hot mopped. Slope: Unlimited (AC -21)
4. Surfaced with ASTM -D1227 asphalt emulsion applied at a minimum coverage 1. Optional Insulations: Manufacturer specified, certified insulations.
rate of 3 galJsq. 2. Approved underlayment installed per manufacturer's instruction.
Comb. Deck 3. #272 Legacy SBS Modified Laminated Shingles, mechanically attached.
Slope: 1/4:12 (AC -13) Note: This system has been tested to UL -2218, and it has achieved a class 4
1. Optional Insulations: Manufacturer specified, certified insulations. impact resistance rating under criteria established by the Texas Department of
2. "3 -, 4 -Plies "#501 ", "#503', "#602", "#603 ", "#605 Panoply" base sheet, fully Insurance. This system is ASTM -D3161 Wind Resistance rated up to 110 mph.
VI.; t ad with #705" Adhesive, or ASTM -D3019 cold process adhesive applied at Comb. Deck
i t �1 r q , 1 0' %lerage rate of 2 galJsq. each ply. Slope: Unlimited (AC -22)
' / �� , 4iatbd with "#705 Adhesive', or ASTM -D3019 cold process adhesive, at 2 1. Optional Insulations: Manufacturer specified, certified insulations.
r and embedded with 3M Brand Na 11 roofing granules at a minimum 2. #270 Northwest XL Shingles or #271 Highlander CS Laminated Shingles,
wi ,) mechanical) attached.
f / „It.,i , Rage rate of lbs. /sq. Y
+, ,� r' Note: This system with #271 Highlander CS Laminated Shingles are is
il 4 ` , )ated , it ti Adhesive, or ASTM -D3019 cold process adhesive, at 4 ASTM -D3161 Wind Resistance rated up to 80 mph. The system with #270
F, x ,,;) an i .edded with roofing gravel ballast at a minimum coverage rate of Northwest XL Laminated Shingles are ASTM -D3161 Wind Resistance rated up to
r.i 110 mph.
• b. Deck Comb. Deck
Slope: 2:12 (AC -14) Slope: Unlimited (AC -23)
1. Optional Insulations: Manufacturer specified, certified insulations. 1. Optional Insulations: Manufacturer specified, certified insulations.
2. "1 -Ply "#501", "#503", 70515" base sheet or inverted "#502" cap sheet, 2. ""#250 Monterey" SBS modified fiber glass shingles, installed per
mechanically fastened (optional when minimum 1/2" insulation board is applied). manufacturer's instructions.
3. "2 -, 3 -Plies "#501" or "#503' base sheet, "#500", "#506" ply sheet, fully adhered Comb. Deck
with ASTM -D312 roofing asphalt, hot mopped. Slope: 1:12 (AC -24)
4. "1 -Ply "#350 ", #502" cap sheet, fully adhered with ASTM -D312 roofing asphalt, 1. Optional Insulations: Manufacturer specified, certified insulations.
hot mo.. =d. 2. "1- or more Plies °#501 ", " #515 ", "#602 ", "#603 ", "#605 Panoply" base sheet
omb. • =c mechanically attached or fully adhered with ASTM -D312 roofing asphalt, hot
Slope: 1/2:12 (AC -15) mopped, or 1 -Ply of " #1000 ESHAvent®", self- adhesive base sheet.
1. Optional Insulations: Manufacturer specified, certified insulations. "1- or mote Plies "#500 ", "#506" ply sheet, "#501 ", " #515', "#602 ", "#603 ", "#605
2.'1 -Ply " #501 ", "#503 ", "#602 ", "1/603°, "#605 Panoply" glass fibered base sheet ; Panoply"fully adh'er•rd with ASTM -D312 roofing asphalt, hot mopped. Optional
mechanically fastened. "'" j vhan insulation is use.
3. "1-Ply "#919 Polyglass" cap sheet, fully adhered with ASTM -0312 Type III et i c -Ply "#650 Panop y", °#625 Paragon" SBS cap sheet, fully adhered with
roofing asphalt, hot mopped, or "#705" or ASTM -D3019 cold process adhesr TM -0312 . roofing asphalt, hot mopped.
4. Surfaced with "Malarkey" aluminum roof coating applied at a minimum ` i afnb.,0 c. '
coverage rate of 1 -1/2 gal. /sq. Slope: Unlimlki (AC25)
Comb. Deck 1. bdtional Inaula ons: Manufacturer specified, certified insulations.
Slope: Unlimited (AC -16) 2. "1 -Ply "#501 ";''#503", °#602", "#603 ", "#605 Panoply" base sheet, mechanically
1. Optional Insulations: Manufacturer specified, certified insulations. fastened or filly adhered with ASTM -D312 roofing asphalt, hot mopped.
2. "3 -, 4 -Plies "#501", "#503 ", "#515 ", "1/602 ", "#603", "#605 Panoply" base sheet, 3. "1- or more Plies "#500 ", "#506" ply sheet or "#501 ", °#503", "#602 ", "#603 ",
fully adhered each ply with ASTM -D312 roofing asphalt or "#705" adhesive or "#605 Panoply" base sheet, fully adhered with ASTM -0312 roofing asphalt, hot
ASTM -D3019 cold process adhesive. mopped. Optional when insulation is used.
3. Flood coated with roofing asphalt or adhesive and embedded with nominal 3/8" 4. "1 -Ply " #1020 ESHAIum®", fully adhered with ASTM -D312 roofing asphalt, hot
pea gravel at a minimum coverage rate of 150 IbsJsq. mopped.
4. Optional: "Heatshield" primer and rock bonder applied at a coverage rate of 1 Comb. Deck
galJsq. Slope: 1- 1/2:12 (AC -26)
5. Surfaced with " Heatshield" cementitious coating per manufacturers' instructions. 1. Optional Insulations: Manufacturer specified, certified insulations.
Comb. Deck 2. Two plies of #501, " #503" or #515 base sheet ASTM- D4601, mechanically
Slope: 1:12 (AC -17) fastened.
1. Optional Insulations: Manufacturer specified, certified insulations. 3. One ply of #161 APP cap sheet, torched.
2. '1 -Ply °#501 ", "#503 ", "#515 ", "#602 ", "#603 ", "#605 Panoply" base sheet, Comb. Deck
mechanically fastened, or fully adhered with "#705" or ASTM -D3019 cold process Slope: 1:12 (AC -27)
adhesive or ASTM -D312 roofing asphalt, hot mopped, or 1 -Ply "#1000 1. Optional Insulations: Manufacturer specified, certified insulations.
ESHAvent®" self - adhesive base sheet. 2. One ply of #1000 ESHA Vent self adhesive base sheet, glued.
3. Optional: 1 -Ply " #500", "#506" ply sheet or "#501", °#503" "#602", "#603 ", °#605 3. One ply of #159 APP base sheet, torched.
Panoply' base sheet, fully adhered with "#705" or ASTM -D3019 cold process 4. One ply of #160 APP ply sheet, torched.
adhesive or ASTM -0312 roofing asphalt, hot mopped. 5. Two gallons per 100 sq.ft. of #726 Aluminum Coating per ASTM -D2824 Type
4. "1 -Ply "#917 Polyglass" cap sheet, fully adhered with "#705" or ASTM -D3019 Ill.
cold process adhesive or ASTM -D312 roofing asphalt, hot mopped. Comb. Deck
Comb. Deck Slope: 1:12 (AC -28)
Slope: 2:12 (AC -18) 1. Optional Insulations: Manufacturer specified, certified insulations.
1. Optional Insulations: Manufacturer specified, certified insulations. 2. Two plies of #501, " #503" or #515 base sheet ASTM -04601 mechanically
2. " #1000 ESHAvent®" thermally adhered roofing membrane. attached.
3. '1 -Ply Item "#500" ply sheet, hot mopped with ASTM -0312 asphalt. 3. One ply of #159 APP base sheet, torched.
4. "1 -Ply of "#601 ", "#350", "#502", "#917", "#919° cap sheet. 4. Two gallons per 100 sq.ft. of #726 Aluminum Coating per ASTM -D2824 Type
Comb. Deck III.
Slope: 3:12 (AC -19) Comb. Deck
1. Optional Insulations: Manufacturer specified, certified insulations. Slope: 1- 1/2:12 (AC -29)
2. • 3 -, 4 -Plies "#500", "#503 °, #506° ply sheet or "#501', "#515", "#602'. "#603", 1. Optional Insulations: Manufacturer specified, certified insulations.
" #605 Panoply", mechanically fastened or fully adhered first ply, subsequent plies 2. One ply of #501, " #503" or #515 base sheet ASTM -D4601 mechanically
fully adhered with cold process adhesives or ASTM -0312 roofing asphalt. attached.
3. Roofing gravel ballast applied at a minimum 400 lbs. /sq. into flood coat of cold 3. One ply of #159 APP base sheet, torched.
process adhesive or roofing asphalt. 4. One ply of #161 APP cap sheet, torched.
336
. . . .
1
•
4 Roofing Product
M4 —BHA 4.9
M4- CONVENTIONAL
SUBSTRATE Roof Membrane mated ,fe et:• •
NAILED OR Premium f erlllass SB9
FULLY ADHERED B ase8ilaset#501 . 1 ply 301bs.
PremaunV, Type 1V
2„ 2„ PIyShaa `.' s: 2piieist::18lbs,
Premitam;1' fiberglass
: ., . • .. Mineral S0JIaoa#62 :
18 .:,..
3/e
39 3 9 " : ` :
39 AspheRshall be asshown Irt D2
Each mopping will weigh approx.
203/4" 11:3/4* f 1 1 y 25 lbs per 100 square feet.
,
Slope in BASE SHEET ATTACHMENT I Depending on Deck
. Deck Type-Uninsulated Rating 12" Mech. I Type Change Spec
See Gen. Req. Fast. Asphalt Number to Read*
Combust. / Nailable Wood A 2" C.6 X M4 -WU B HA -H
Structur at,Concrete. A 2" C.7 X M4 -CU -BHA -H
Lightlyttight Concrete A 2" C.8 X M4 -LU -BHA -H
Metal ' ' ' N/A N/A
Structural Wood Fiber N/A N/A
Gypsum A 2" C.11 X M4 -GU -BHA -H
Precast Slabs N/A N/A
Slope in Insulation Roofing Depending on Deck
Deck Type - Insulated Rating 12" Attachment Attachment to Type Change Spec
See Gen. Req. Insulation Number to Read`
Combust. /Nailable Wood A 2" F.2 Hot Asphalt M4 -WI -BHA -H
Structural Concrete A 2" F.4 Hot Asphalt M4 -CI -BHA -H
Lightweight Concrete A 2" F.5 Hot Asphalt M4 -LI -BHA -H
Metal A 2" F.3 Hot Asphalt M4 -MI -BHA -H
Structural Wood Fiber A 2" F.8 Hot Asphalt M4 -SI -BHA -H
Gypsum A 2" F.6 Hot Asphalt M4 -GI -BHA -H
Precast Slabs A 2" F.4; F.7 Hot Asphalt M4 -PI -BHA -H
Refer to Tab 2 for General Requirements: Responsibilities, quality control, deck consideration, and other general topics.
Refer to Tab 11 for Products and Associated Materials information.
Refer to Tab 6 for Execution Specifications.
Refer to Tab 7 for Flashing Details. * Change last Character (H =Hot Asphalt):
S =SEBS Hot Asphalt
i
" r
4 malarkey
Roofing Products- 4 -1
THE FOLLOWING SECTION SHOWS ROOFING
SYSTEMS USING #501 OR #605 SBS BASE SHEETS.
MALARKEY #515 FIBERGLASS BASE SHEET MAY BE
SUBSTITUTED ON ALL CONVENTIONAL SPECIFICATIONS
WITHOUT ADVERSELY AFFECTING THE FIRE RATING
BUT MAY AFFECT THE WARRANTY OPTIONS OF THE
SYSTEM.
CONTACT MALARKEY FOR SPECIFIC DETAILS.
1
i