Specifications FIRE SYSTEM ACCESSORY
o� 3 °7aoy 5w D�^GLa�, Rc 030-11 e a� - ask
F irepower 5495 = .x
Distributed Power Module
3e.
In an emergency,
y ou need maximum power.
The Firepower 5495 Distributed Power Module by Silent Knight is the most -
powerful and cost - effective power supply available today. It delivers 6 amps of
notification appliance circuit power and built -in synchronization for appliances
from System Sensor®,Gentex®, Wheelock and Faraday — what you need to drive power -hungry components
like ADA notification appliances. The 5495's advanced microprocessor design is years ahead of the competition.
Its switch mode power supply design is up to 50% more efficient than competitive linear mode power supplies.
And, ADA retrofits are easier and less expensive with the 5495 because it integrates into current systems
without the costly investment in new components.
For the most sophisticated and cost - effective notification power supply available, you need Firepower 5495. Call
Silent Knight today for more information at 1- 800 -446 -6444.
Firepower 5495 • Independent trouble relay resistors provided. Since the 5495
Distributed Power Module • AC loss delay option shuts off power draws very little power from the control,
The firepower 5495 is a 6 amp to non - essential high- current it is possible to connect one Firepower
notification power expander that accessories like magnetic door 5495 to each notification circuit on the
provides its own AC power connection, holders control panel and still provide full
battery charging circuit, and backup • Built -in synchronization for supervision of the notification circuits all
battery for use with fire and security appliances from System the way back to the control panel.
controls such as the Silent Knight Sensor®,Gentex®, Wheelock and
Model 5208 Fire Control Faraday
/Communicator. The 5495 is the cost-
effective solution for powering Stand alone operation. z Y'
notification appliances required by the • Lightweight design adds to ease of
Americans with Disabilities Act (ADA). installation and reduces shipping
The 5495 has built -in ANSI cadence costs y �
pattern, which can upgrade older • Operates with most polarized, UL
control panels that lack cadence Listed notification devices i 5 '
capability.`��
• UL 864 & 1481 listed
Features • CSFM approved
• UL Listed for 6 amps of notification
power • ANSI Cadence pattern output �F n
• Power supply's advanced switch capability built -in
4':. R •,,
mode design reduces damaging Connection to Local Fire Control
heat and manages power up to 50% Firepower 5495 may be connected to a
more efficiently than other systems local fire control which utilizes Class A
• Dip switches allow for easy or Class B type notification circuits
reconfiguration operating between 9 and 32 VDC. The
• 24 VDC filtered output voltage control panel's notification circuit ism
• Four power - limited notification connected to one of the inputs on the ` ,. . -„
outputs; 2 Class A or 4 Class B, or 1 5495. The control panel's notification Firepower 5495
Class A and 2 Class B circuit end -of -line resistor is also Distributed Power Module
• Additional continuous auxiliary connected across two terminals on the
output Firepower 5495, which provides
supervision between the 5495 and the
• 3 amps per output circuit fire control panel. Polarized audible SILENT
• 2 inputs; 2 Class B or 2 Class A and /or visual notification devices are KNIGHT
• Ground fault detector /indicator then connected to the 5495 signal ` .
circuits using the 4.7k) end -of -line
CONSTRUCTION ties Act (ADA) or per national /local requirements. Manual
• Cover, backplate and operation handle are all molded Stations shall be Underwriters Laboratories listed.
of durable polycarbonate material. `NOTE: The words 'FIRE/FUEGO "on the BG-12LSP shall ap-
• Cover features white lettering and trim. pear on the front of the station in white letters, approximately 3/
4" high.
• Red color matches System Sensor's popular
SpectrAlertTM horn /strobe series. PRODUCT LINE INFORMATION
OPERATION Model Description
• The BG -12 manual pull stations provide a textured finger- BG - 12S Single- action pull station with pigtail connec-
hold area that includes Braille text. In addition to PUSH tions, hex lock.
IN and PULL DOWN text, there are arrows indicating how BG - 12SL Same as BG -12S with key lock.
to operate the station, provided for non - English- speaking
persons. BG - Dual- action pull station with SPST N/O
switch, screw terminal connections, hex lock.
Pushing in and then pulling down on the handle activates
the normally -open alarm switch. Once latched in the down BG - 12L Same as BG -12 with key lock.
position, the word "ACTIVATED" appears at the top in BG - 12LSP Same as BG -12L with English /Spanish
bright yellow, with a portion of the handle protruding at (FIRE/FUEGO) labeling.
the bottom as a visible flag. Resetting the station is simple: BG - 12LOB Same as BG-12L with "outdoor use" listing.
insert the key or hex (model dependent), twist one guar- Includes WBB outdoor backbox, and sealing
ter -turn, then open the station's front cover, causing the
spring - loaded operation handle to return to its original gasket.
position. The alarm switch can then be reset to its normal BG - 12L0 Same as BG -12L with "outdoor use" listing.
(non - alarm) position manually (by hand) or by closing the Does not include backbox.
station's front cover, which automatically resets the switch. BG - 12LA Same as BG -12L with auxiliary contacts.
SPECIFICATIONS BG - 12LPS Same as BG -12L with presignal feature.
Physical Specifications: BG - 12LPSP Same as BG -12LPS with English /Spanish
(FIRE/FUEGO) labeling.
SB - Indoor use backbox.
BG SB - 10 WP - 10 WBB
WP - Outdoor use backbox.
Height: 5.5 inches 5.5 inches 6.0 inches 425 inches WBB Outdoor use backbox.
(13.97 cm) (13.97 cm) (15.24 cm) (10.79 cm)
Width: 4.121 inches 4.121 inches 4.69 inches 4.25 inches
(10.47 cm) (10.47 cm) (11.91 cm) (10.79 cm)
Depth: 1.39 inches 1.375 inches 2.0 inches 1.75 inches
(3.53 cm) (3.49 cm) (5.08 cm) (4.445 cm)
52004t1 -tbl
1.390"
Electrical Specifications: (35.306)
4
Switch contact ratings: gold - plated; rating 0.25 A ® 30
VAC or VDC.
ENGINEERS' & ARCHITECTS' Wire Gauge
SPECIFICATIONS
Manual Fire Alarm Stations shall be non -code, with a key- - -
or hex - operated reset lock in order that they may be tested, 1.000"
and so designed that after actual Emergency Operation, (25.40)
they cannot be restored to normal except by use of a key or
hex. An operated station shall automatically condition it-
self so as to be visually detected as activated. Manual
stations shall be constructed of red colored LEXAN® (or
polycarbonate equivalent) with clearly visible operating in- 0.750"
structions provided on the cover. The word FIRE shall ap- (19.05)
5.500"
pear on the front of the stations in white letters, 1.00 inches (139.70)
(25.4 mm) or larger.* Stations shall be suitable for sur-
face mounting on matching backbox SB -10; or semi -flush (mm)
mounting on a standard single -gang, double -gang, or 4" -
(10.16 cm) square electrical box, and shall be installed
within the limits defined by the Americans with Disabili- -
E
Page 2 of 2 — DF -52004
k
EA ..e ►,' .a �. INC s. •
FIRE ALARM SYSTEMS Helping People Take Actions""
\ Q
\ SERIES NS
spEc I FIRE SINGLE & MULTI- CANDELA
HORN STROBE APPLIANCES
A Family of Multi- Candela Appliances` SERIES NH HORNS
Description t
The Series NS Horn Strobe Appliances will satisfy virtually R E
all requirements for indoor, wall mount applications. -
y
The Series NH Horn and the horn portion of the Series Series NH Series NS
NS include a selectable continuous horn tone or temporal
pattern (Code 3) with selectable dBA settings of 90 or 95
dBA.
Strobe options include 1575cd or Wheelock's patented
Multi- Candela strobe with field selectable candela settings
of 15/30/75/110cd.
Multi - Candela Indicator
These versatile Horn Strobe Appliances may be (bottom of Strobe Lens)
synchronized when used in conjunction with the
Wheelock SM, DSM Sync Modules or Wheelock's
PS- 12/24 -8MP Power Supply with patented Sync Features
Protocol. Additionally, the audible may be silenced while Approvals include: UL Standard 1971, UL Standard 464,
maintaining strobe activation. New York City (MEA), California State Fire Marshal
All models of the Series NS and NH are designed for (CSFM) and Factory Mutual (FM) Pending: Chicago
(BFP)
maximum performance, reliability and cost - effectiveness
while meeting or exceeding the latest requirements of ADA/NFPA/UFC /ANSI compliant
NFPA 72 /ANSI 117.1 /UFC and UL Standards 1971 and • Complies with OSHA 29, Part 1910.165
464 as well as meeting ADA requirements concerning • Field Selectable Candela Settings 15/30/75/110cd
photosensitive epilepsy. (24 VDC Multi - Candela models) or 1575cd in 12 or 24 VDC
•
Wheelock's patented 2 -Wire Series NS Horn Strobes and Selectable Continuous Horn or Temporal (Code 3)
Series NH Horns offer more features with low current draw. • 2 Selectable dBA settings of 90 and 95 dBA in both tones
• Patented Universal Mounting Plate
• 12 and 24 VDC models with UL "Regulated Voltage" using
filtered DC or unfiltered VRMS input voltage
• Wall Mount
• NH horn is selectable 12 or 24 VDC in 1 unit
• Synchronize with Wheelock SM, DSM Sync Module
or Wheelock PS- 12/24 -8MP Power Supply with built -in
sync protocol
• Fast installation with IN /OUT screw terminals using #12 to
#18 AWG wires
Copyright 2003 Wheelock Inc. All rights reserved.
ARCHITECTS AND ENGINEERS' SPECIFICATIONS
The audible /visual notification appliances shall be Wheelock Series NS Horn Strobe appliances and Series NH Horn appli-
ances or approved equals. The Series NS appliances shall meet and be listed for UL Standard 1971(Emergency Devices for
the Hearing- Impaired for Indoor Fire Protection Service). The Series NH Horn shall be UL Listed under Standard 464 (Fire
Protective Signaling). The horn strobe shall be listed for indoor use and shall meet the requirements of FCC Part 15 Class B.
All inputs shall be compatible with standard reverse polarity supervision of circuit wiring by the Fire Alarm Control Panel (FACP).
The audible portion of the appliance shall have a minimum of two (2) field selectable settings for dBA levels (90 and 95 dBA)
and shall have a choice of continuous or temporal (Code 3) audible outputs.
The strobe portion of the appliance shall produce a flash rate of one (1) flash per second over the Regulated Voltage Range and
• shall incorporate a Xenon flashtube enclosed in a rugged Lexan lens. The Series NS shall be of low current design. Where wall
mount, Multi - Candela appliances are specified, the strobe intensity shall have field selectable settings and shall be rated per
UL Standard 1971 for 15/30/75/110 candela. The selector switch for selecting the candela setting shall be tamper resistant.
The 1575 candela strobe shall be specified when 15 candela UL Standard 1971 Listing with 75 candela on -axis is required
(e.g. ADA compliance).
When synchronization is required, the appliance shall be compatible with Wheelock's SM, DSM Sync Modules or Wheelock's
PS- 12/24 -8MP Power Supply with built -in Patented Sync Protocol. The strobes shall not drift out of synchronization at any time
during operation. If the sync module or Power Supply fails to operate, (i.e., contacts remain closed), the strobes shall revert to
a non - synchronized flash -rate. The appliance shall also be designed so that the audible signal may be silenced while
maintaining strobe activation.
The Series NS Horn Strobes and NH horn shall incorporate a Patented Universal Mounting Plate that shall allow mounting to
a single -gang, double -gang, 4 -inch square, 100mm European type backboxes, or the SHBB Surface Backbox. If required, an
NATP (Notification Appliance Trimplate) shall be provided.
All notification appliances shall be backward compatible.
SPECIFICATION & ORDERING INFORMATION
Order Non- Sync wl SM, DSM 24 12 2 Agency Approvals
Model Strobe Candela Mounting Options#
Code Sync or PS- 12/24-8MP VDC VDC WIRE UL MEA CSFM FM BFP
NS- 24MCW -FR 9404 15/30/75/110 X X X X B,D,E,F,GH,J,N,O,R,X X X X X X
NS- 24MCW -FW 9405 15/30/75/110 X X X - X B,D,E,F,GH,J,N,O,R,X X X X X X
NS- 241575W -FR 7806 15 (75 on Axis) X X X - X B,D,E,F,GH,J,N,O,R,X X X X X X
NS- 241575W -FW 7811 15 (75 on Aws) X X X - X B,D,E,F,GH,J,N,O,R,X X XI X X X
NS- 121575W -FR 7816 15 (75 on Axis) X I X - X X B,D,E,F,GH,J,N,O,R,X X X X X X
NS- 121575W -FW 7818 15 (75 on Axis) X X X X B,D,E,F,GH,J,N,O,R,X X XI X X X
NH- 12/24 -R 7449 - X X X X X B,D,E,F,GH,J,N,O,R,X X X X X X
NH- 12/24 -W 7500 - X X X X X B,D,E,F,GH,J,N,O,R,X X X X X X
Note: Models are available in Red or White. Contact Customer Service for Order Code and Delivery.
#Refer to Data Sheet S7000 for Mounting Options
NOTE: Due to continuous development of our products, specifications and offerings are subject to change without notice in
accordance with Wheelock Inc. standard terms and conditions.
WE ENCOURAGE AND SUPPORT NICET CERTIFICATION
3 YEAR WARRANTY
Made in USA Distributed By:
National Sales Office
800 - 631 -2148
Canada 800 - 397 - 5777
E -Mail: Info @wheelockinc.com
http: / /www.wheelockinc.com Member
273 Branchport Avenue • Long Branch, NJ 07740 • TEL: 732 - 222 -6880 • FAX: 732 - 222 -2588
S2100 12/03