Report C0 'POST RFCFIVED
O C T 2 e 022
CITY OF TIGARD
BUILDING D11(ISION
44-
" • • `*� W NCAT T
FIRE PROTECTION , INC.
9095 S.W. Burnham
Tigard, OR 97223
SWAROVSKI
9646 SW WASHINGTON SQ RD, G14
TIGARD, OR 97223
CITY OF TIGARD
Approved
Contitionally Approved f
For only the work as described in:
PERMIT NO. FPS �a a—a-t )C
See Letter to: Follow f J
Attach
Job Address: SA.) `ActC ,
By: Date: �a7
r
FIRE PROTECTION
EQUIPMENT SUBMITTAL
II
tliOOWorldwide
Fire Protection
Contacts www.tyco-fire.com
Products
Series TY-FRB, 5.6 K-factor
Upright, Pendent, and Recessed Pendent Sprinklers
Quick Response, Standard Coverage %
General NOTICE S
The TYCO Series TY-FRB Sprinklers
Description described herein must be installed and
maintained in compliance with this doc-
The TYCO Series TY-FRB,5.6 K-factor, ument, as well as with the applicable
Upright(TY313)and Pendent(TY323) standards of the National Fire Protec-
Sprinklers described in this data sheet tion Association,in addition to the stan- t, r ''
are quick response,standard coverage, dards of any other authorities having
decorative 3 mm glass bulb-type spray jurisdiction.Failure to do so may impair
sprinklers designed for use in light or the performance of these devices.
ordinary hazard,commercial occupan- The owner is responsible formaintain-
cies such as banks, hotels, and shop- .
ping malls. ing their fire protection system and
devices in proper operating condition.
The recessed version of the Series TY- The installing contractor or sprinkler
FRB Pendent Sprinkler,where applica- manufacturer should be contacted with
ble, is intended for use in areas with a any questions.
finished ceiling.This recessed pendent
sprinkler uses one of the following: Sprinkler "i''
• A two-piece Style 15 Recessed , L'
Escutcheon with recessed adjust- Identification r M ,,,,
ment up to 5/8 inch (15,9 min)from
the flush pendent position. Number (SIN) ` ",, __"�'
• A two-piece Style 20 Recessed '
Escutcheon with recessed adjust- TY313 Upright 5.6K, 1/2"NPT .
ment up to 1/2 inch (12,7.,mm);from TY323 Pendent 5.6K, 1/2"NPT
the flush pendent position. '
The adjustment provided by the Technical a pertu Temre Rating
Recessed Escutcheon reduces the 135°F rate
accuracy to which the fixed pipe drops Data 135°F(57°C)
°C)
to the sprinklers must be cut. 175°F(79°C)
Intermediate level,versions of Series Approvals 200°F(93°C)
TY-FRB Sprinklers are described in UL and C-UL Listed 286°F(141°C)
Technical Data Sheet TFP357. Sprin- FM, LPCB,and VdS Approved
kler guards and shields are described CE Certified Finishes
in Technical Data Sheet TFP780. Sprinklers with Polyester Finish are UL Sprinkler:Refer to Table A
), and C-UL Listed as Corrosion-Resis- Recessed Escutcheon:White Coated,
. . tant Sprinklers. Chrome Plated,or Brass Plated
Maximum Working Pressure Physical Characteristics x
175 psi(12.1 bar) Frame Bronze
250 psi(17.2 bar)' Button Brass/Copper
'The maximum working pressure of 250 psi Sealing Assembly Stainless -
IMPORTANT (17.2 bar)only applies to the listing by Un- Steel w/TEFLON
Always refer to Technical Data derwriters Laboratories,Inc.(UL). Bulb Glass
Sheet TFP70D for the "INSTALLER Discharge Coefficient Compression Screw Bronze
WARNING"that provides cautions K=5.6 GPM/psit12(80,6 LPM/bar1/2) Deflector Bronze
with respect to handling and instal-
lation of sprinkler systems and com-
ponents. Improper handling and
installation can permanently dam-
age a sprinkler system or its compo-
nents and cause the sprinkler to fail
to operate in a fire situation or cause
it to operate prematurely.
Page 1 of 4 FEBRUARY 2014 TFP172
TFP172
Page 2 of 4
Components: *Temperature rating is ** Pipe thread connections per ISO 7-1
1 - Frame 4 - Bulb indicated on Deflector. can be provided on special request.
2 - Button 5 - Compression STYLE 15 or 20
3 - Sealing Screw ESCUTCHEON PLATE 1/2" 7/16"(11,1 mm) RECESSED
Assembly 6 - Deflector* DEFLECTOR* SEATING SURFACE NPT** NOMINAL MAKE-IN ESCUTCHEON 1
6*
5 �" 7/16" . 111M=
___. /
(11,1 mm) t '■rc
E NOMINAL 2" ��
4 } 1
R MAKE-IN pil
(50,8 mm) F-
2 `` 2" 1-3/8" -
•! t (50,8 mm) ` (34,9 mm) J `��
3 I WRENCH
1 ? + II FLATS
1/2"NPT** DEFLECTOR* 2-7/8"(73,0 mm)DIA.
CROSS SECTION UPRIGHT PENDENT RECESSED PENDENT
FIGURE 1
SERIES TY-FRB UPRIGHT(TY313)AND PENDENT(TY323)SPRINKLERS
5.6 K-FACTOR, 1/2 INCH NPT, QUICK RESPONSE
�, Operation Installation
•
The glass bulb contains a fluid which The TYCO Series TY-FRB,5.6 K-factor,
WRENCH RECESS expands when exposed to heat.When Upright(TY313) and Pendent(TY323)
(USE ONLY the rated temperature is reached, the Sprinklers must be installed in accor-
^ END"A") fluid expands sufficiently to shatter the dance with this section.
glass bulb, allowing the sprinkler to General Instructions
FIGURE 2 activate and water to flow. Do not install any bulb-type sprinkler if
W-TYPE 6 the bulb is cracked or there is a loss
SPRINKLER WRENCH Design of liquid from the bulb.With the sprin-
kler held horizontally, a small air bub-
WRENCH Criteria ble should be present. The diameter
RECESS of the air bubble is approximately 1/16
The TYCO Series TY-FRB,5.6 K-factor, inch (1,6 mm)for the 135°F(57°C)and
Upright(TY313) and Pendent(TY323) 3/32 inch(2,4 mm)for the 286°F(141°C)
�,� Sprinklers are intended for fire protec- temperature ratings.
t tion systems designed in accordance
ii
with the standard installation rules rec- A leak-tight 1/2 inch NPT sprinkler joint
ognized by the applicable Listing or should be obtained by applying a min-
Approval agency(such as, UL Listing imum to maximum torque of 7 to 14
is based on the requirements of NFPA ft.-lbs. (9,5 to 19,0 Nm). Higher levels
fir, 13, and FM Approval is based on the of torque can distort the sprinkler Inlet
PUSH WRENCH requirements of FM's Loss Prevention with consequent leakage or impairment
INTO ENSURE Data Sheets).Only the Style 15 or Style of the sprinkler.
ENGAGEMENT 20 Recessed Escutcheon is to be used Do not attempt to compensate for
WITH SPRINKLER for recessed pendent installations. insufficient adjustment in the Escutch-
WRENCHING AREA eon Plate by under-or over-tightening
FIGURE 3 the sprinkler. Re-adjust the position of
r W-TYPE 7 RECESSED the sprinkler fitting to suit.
SPRINKLER WRENCH Upright and Pendent Sprinklers
The Series TY-FRB Upright and Pen-
` dent Sprinklers must be installed
in accordance with the following
instructions.
Step 1.Install Pendent sprinklers in the
pendent position. Install upright sprin-
klers in the upright position.
Step 2. With pipe-thread sealant
applied to the pipe threads, hand-
tighten the sprinkler into the sprinkler
fitting.
TFP172
Page 3 of 4
Step 3.Tighten the sprinkler into the 2-7/8"DIA. _
sprinkler fitting using only the W-Type (73,0 mm)
6 Sprinkler Wrench(Figure 2).With ref-
erence to Figure 1,apply the W-Type 6 2-1/4" DIA.
Sprinkler Wrench to the wrench flats. FACE OF — (57,2 mm)
Torque sprinklers 7 to 14 ft.-lbs.(9,5 to SPRINKLER
19,0 Nm). FITTING 5/8"(15,9 mm)
Recessed Pendent Sprinklers ; ` _ - FLUSH
The Series TY-FRB Recessed Pendent 3/8±5/16" -1
Sprinklers must be installed in accor- (9,5±7,9 mm) /7 Iv 7
dance with the following instructions. }
Step A.After installing the Style 15 or MOUNT/ ING ,�, 1/8"
Style 20 Mounting Plate over the sprin- SURFACE (3,2 mm)
kler threads, and with pipe-thread -"-
sealant applied to the pipe threads, CLOSURE SERIES MOUNTING 1-3/8"(34,9 mm)
hand-tighten the sprinkler into the TY-FRB PLATE 3/4"(19,1 mm)
sprinkler fitting. FIGURE 4
Step B.Tighten the sprinkler into the SERIES TY-FRB RECESSED PENDENT SPRINKLER ASSEMBLY(TY323)
sprinkler fitting using only the W-Type WITH TWO PIECE 5/8 INCH TOTAL ADJUSTMENT STYLE 15
7 Recessed Sprinkler Wrench (Figure RECESSED ESCUTCHEON
3).With reference to Figure 1,apply the
W-Type 7 Recessed Sprinkler Wrench -
to the sprinkler wrench flats. Torque 2-7/8" DIA.
sprinklers 7 to 14 ft.-lbs. (9,5 to 19,0 (73,0 mm)
Nm). FACE OF
SPRINKLER 2-1/4" DIA.
Step C.After ceiling installation and fin- FITTING - (57,2 mm)
ishing,slide on the Style 15 or Style 20
Closure over the Series TY-FRB Sprin- 5/16±1/4" 1/2"(12,7 mm)
kler and push the Closure over the (7,9±6,4 mm)
Mounting Plate until its flange comes in - FLUSH
contact with the ceiling. ,� �-I _1 I , ,7 ��
Care and f I '�/`%/, I ava _
MOUNTING Q
1/8 J
Maintenance SURFACE (3,2 mm)
The TYCO Series TY-FRB,5.6 K-factor,
Upright(TY313) and Pendent(TY323) CLOSURE SERIES MOUNTING 1-3/8"(34,9 mm)
Sprinklers must be maintained and ser- TY-FRB PLATE 7/8"(22,2 mm)
viced in accordance with this section. FIGURE 5
Before closing a fire protection system SERIES TY-FRB RECESSED PENDENT SPRINKLER ASSEMBLY(TY323)
main control valve for maintenance WITH TWO PIECE 1/2 INCH TOTAL ADJUSTMENT STYLE 20
work on the fire protection system RECESSED ESCUTCHEON
that it controls, obtain permission to
shut down the affected fire protection Modified sprinklers must be replaced. standards of any other authorities hay-
systems from the proper authorities Sprinklers that have been exposed to ing jurisdiction. Contact the installing
and notify all personnel who may be corrosive products of combustion, but contractor or sprinkler manufacturer
affected by this action. have not operated,should be replaced regarding any questions.
if they cannot be completely cleaned
Absence of the outer piece of an Automatic sprinkler systems are rec-
escutcheon, which is used to cover by wiping the sprinkler with a cloth or ommended to be inspected, tested,
a clearance hole, can delay sprinkler by brushing it with a soft bristle brush. and maintained by a qualified Inspec- 1
operation in a fire situation. Care must be exercised to avoid dam- tion Service in accordance with local
The owner must assure that the sprin- age to the sprinklers before,during,and requirements and/or national codes.
klers are not used for hanging any after installation. Sprinklers damaged
objects and that the sprinklers are only by dropping, striking, wrench twist/
cleaned by means of gently dusting slippage,or the like,must be replaced.
with a feather duster;otherwise, non- Also, replace any sprinkler that has a
operation in the event of a fire or inad- cracked bulb or that has lost liquid from
vertent operation may result. its bulb.(Ref. Installation Section.)
Sprinklers which are found to be leak- The owner is responsible for the
ing or exhibiting visible signs of corro- inspection,testing,and maintenance of
sion must be replaced. their fire protection system and devices
in compliance with this document, as
Automatic sprinklers must never be well as with the applicable standards
painted, plated, coated, or other- of the National Fire Protection Associa-
wise altered after leaving the factory. tion (e.g., NFPA 25), in addition to the
•
TFP172
Page 4 of 4
P/N* 77 - XXX - X - XXX
i I
SPRINKLER TEMPERATURE
FINISH RATINGS
SIN 1 NATURAL BRASS 135 135°F(57°C)
370 5.6K UPRIGHT(1/2"NPT) TY313 3 PURE WHITE(RAL9010)° 155 155°F(68°C)
POLYESTER
371 5.6K PENDENT(1/2"NPT) TY323 q SIGNAL WHITE(RAL9003) 175 175°F(79°C)
POLYESTER
'Use suffix"I"for ISO 7-1 connection; 9 CHROME PLATED 200 200°F 93°C
for example,77-370-4-175-I ( )
Eastern Hemisphere sales only 286 286°F(141°C)
TABLE A
SERIES TY-FRB UPRIGHT AND PENDENT SPRINKLERS
PART NUMBER SELECTION
Limited Ordering
Warranty Procedure
For warranty terms and conditions,visit Contact your local distributor for avail-
www.tyco-fire.com. ability.When placing an order,indicate
the full product name and Part Num-
ber(P/N).
Sprinkler Assemblies with NPT
Thread Connections
Specify:Series TY-FRB Upright or Pen-
dent(specify) Sprinkler, SIN (specify),
K=5.6,Quick Response,(specify)tem-
perature rating, (specify) finish, P/N
(specify,refer to Table A).
Recessed Escutcheon
Specify:Style 15 Recessed Escutcheon
with(specify*)finish, P/N(specify*)
Specify: Style 20 Recessed Escutch-
eon with(specify*)finish, P/N(specify*)
*Refer to Technical Data Sheet TFP770
Sprinkler Wrench
Specify: W-Type 6 Sprinkler Wrench,
P/N 56-000-6-387
Specify: W-Type 7 Sprinkler Wrench,
P/N 56-850-4-001
GLOBAL HEADQUARTERS 11400 Pennbrook Parkway,Lansdale,PA 19446 I Telephone+1-215-362-0700
Copyright®2014 Tyco Fire Products,LP. All rights reserved. Lilco
TEFLON is trademark of The DuPont Corporation. Fire Protection Products
:0 SCHEDULE 10 840
a r il 00 too
l"
ti.itslir hitt,. , .
,,
. .. . ,, ,.
,. .
. ,
......_ , .., .. lel, „ , . .
4
.4115
,..
'p 1 r.
, . .
40.0oriN
IP
..
Always ready to protect your most valuable assets.
As the leading supplier of steel sprinkler pipe,we understand that there are no second chances in fire suppression.You
need products of enduring quality and exceptional strength-plus reliable service.You need Bull Moose.
Bull Moose Fire Sprinkler Pipe Produc Information
Nominal Pipe Size{Indies) 1„ 11/4" 14/2" 2" 2-1/2" 3" 4" 6" 8° NPS(lo.) 1" 1-1/4" 1-1/2„ 2" 2-1/2" 3" 4„
0 3 In) 1315 1.660 1.900 2.375 2.875 3.500 4.500 6.625 8.625 1315 1.660 t900 2.375 2.875 3.500 4.500
O ID (in) 1.097 1.442 _1.682 _2.157 _2.635 3160 4.260 _6.357 0.249 O 1.049 1.380 1.510 2.067 2A69 3.06E 4.026
W Empty Weight(Ib/ft) 1.410 1.810 2.090 2.640 3.530 4.340 5.620 9290 15.940 W 1.680 2.270 2.720 3.660 5.800 7.580 10.800
-I Water Pilled Weight(lb/ft) 1.820 2.518 3.053 4.223 5.893 7.957 11.796 23.038 40.086 -I2.055 2.918 3.602 5114 7.875 10.783 16.31 alC.R.R. i 15.27 9.91 7.75 6.27 4.92 3.54 2.50 1158 1.805 0 1.00 1.00 1.00 1.00 too 1.00 1.00 l
I-1•I Pieces per Lift 91 61 61 37 30 19 19 10 7 661 70 51 44 30 30 19 19
}= Lift Weight;Ibs)21'lengths 2,595 2,319 2,677 2,051 2,224 1,732 2,242 1,951 2,490 = 2,470 2,431 2,513 2,306 3,654 3,024 4,309
"• Lift Weight(Ibs)24 lengths 3,079 2,650 3,060 _2,3442,542 1,979 _2,563 2A0 2,848 2,822 2,718 2,872 2,635 4,776 3,456 4,925
Lift Weight(Ibs)25'lengths 3,208 2,760 3,187 2,442 2,648 2,062 2,670 2,940 2,594 2,992 2,745 4,350 3,601 5,130
1.---- .'_.., t 4,axty x.#. r r' : OTHER BENEFITS/SERVICEr.
• UL listed(US&Canada)and FM approved • We have the most stocking locations in the industry,
• ASTM A135 and A795 Type E,Grade A Certified for best delivery and availability
• Plain end or roll groove
• Complies with NFPA-13,13R and 14
• Eddy Guard II"bacterial-resistant internal coating
• Industry-leading hydraulic characteristics • Custom length options
• CRR of 1.0 and greater • Hot dipped galvanization
• All pipe NDT weld tested • Reddi-Pipe`"red or black pipe eliminates field painting
• Compatible for use in wet, dry. preaction and deluge
sprinkler systems
Exclusive maker of Reddi-Pipe® . The only maker with EPDs(to help earn LEED pcints).
RED DR BLACK PAINTED PIPE.
CeUS LISTED ® [no ONFSA
APPROVED NFPA
14 . -
. -- 800.325 4467 ° -
I BULL T/[OOSE sales®Bull1,1,„ „, 11 trilns.Com
• l " I 1 seTube.com
t TUBE
Ductile Iron Threaded Fittings
„....,,,,,,:,-, ......„.....,,..„,,,,F.:;-„,„as n r z 1 4{7, �� .m., �
s.. .w*a. : ik
,..4.,... ,,..,,,,c..
� u ^^' ;1SPR a 'G, may. ,,✓
r
_,
sww.
JJ j3 t
j // f
9 F •
ik ..
x fi
,,,..!1,.,-., .::"L":.,4;::!:;:.,:',;:;t:',2''‘:':kr 'e,-'..i..t. ..::-i:';''
x
#�., +� `
rn�p aro
vl
SvHTH COOPER
INTERNATIONAL
Ductile Iron Threaded Fittings
Specifications
• 4> branded ductile iron threaded fittings are UL Listed and FM Approved at 500 psi
• Rated to 300 WSP
C 13 US
• Ductile iron castings conform to ASTM A536
LISTED
• Fitting dimensions conform to ASME B16.3
• Bushings and plugs conform to ASME B16.14 441>
• Fittings are 100% air tested APPROVED
• NPT threads on all fittings conform to ASME B1.20.1
• Independent lab verification that fittings meet applicable chemical &physical properties
• Manufacturing facilities are ISO 9001:2008 and ISO 14001
Temperature Working Pressure, Nonshock psiG
Degrees F 300# Class Threaded Fittings
20 to 100 500
150 500
200 480
250 460
300 440
350 420
400 400
450 380
500 360
550 340
600 320
650 300
.how 1. ' Ductile Iron Fittings- Class 300 UL/FM
c ® us
APPROVED
Fig. 35E 3- 90° Elbow LISTED
A Size A Packing Weight
e/t..�� in Part Number
in Inner Master lb
1/2 35L 3004 1.13 100 200 0.2
+' U i 3/4 35E 3006 1.31 70 140 0.3
.1MD* 4
I A 1 35L 3010 '_50 40 80 0.5
44! 1-1/4 35E 3012 1.75 25 50 0.8
1-1/2 35E 3014 1.94 18 36 1.1
2 35E 3020 2.25 10 20 1.8
2-1/2 35E 3024 2.70 4 8 3,2
Fig. 35RE3- 90°Reducing Elbow
B Size A B PackingWeight
' in Part Number in in Inner Master Ib
3/4 x 1/2 35RE3006004 1.20 L L 22 80 160 3
I� 1 x 1/2 358E3010004 1.26 1.36 70 140 0.4
-" A 1 x 3/4 35RE3010006 1_38 1.45 50 100 0.4
1
A 1-1/4 x 1/2 35RE3012004 1.34 1.53 35 70 0.5
1-1/4 x 3/4 35RE3012006 1.45 1.63 35 70 0.6
1-1/4 x 1 35RE3012010 1.58 1.67 30 60 0.7
1-1/2 x 1/2 35RE3014004 1-52 1.75 30 60 0-6
1-1/2x3/4 35RE3014006 1.52 1.75 25 50 0.7
1-1/2 x 1 35RE3014010 1.65 1.80 20 40 0.8
1-1/2 x 1-1/4 35RE3014012 1.82 1.88 18 36 1.0
2 x 1/2 35RE3020004 1.60 1,97 18 36 1 0
2 x 3/4 35RE3020006 1.60 1.97 18 36 1.0
2 x 1 3513E3020010 1.73 2.02 16 32 1.2
2 x 1-1/4 35RE3020012 1.90 2.10 12 24 1.3
2 x 1-1/2 35RE3020014 2.02 216 10 20 1,5
2-1/2 x 1-1/2 35RE3024014 2.16 2.51 6 12 2.2
2-1/2 x 2 35RE3024020 2.39 2.60 6 12 2.5
Fig. 35F 3-45°Elbow
Size Part Number A Packing Weight
•
A in in Inner Master lb
� 1/2 35F 3004 0.88 150 300 0.2
3/4 35F 3006 0.98 80 160 0.3
� 35F 3010 3 40 80 0,5
1-1/4 35F 3012 1.29 25 50 0.7
v At
It ii ^A 1-1/2 35F3014 1_44 20 40 1,0
2 35F 3020 69 10 20 1.6
2-1/2 35F 3024 1-95 4 8 2,7
Fig. 35T3- Tee
Size Part Number A Packing Weight
in in Inner Master lb
UNt. ^A 1/2 35T 3004 1_13 80 160 0.3
I 3/4 35T 3006 1.31 30 60 0.5
I= ir
1 35T 3010 1.50 25 50 0.7
1-1/4 35T 3012 1.75 10 20 1.1
1-1/2 35T3014 1-94 10 20 1.5
A ' A
2 35T 3020 2.25 6 12 2,4
2-1/2 35T 3024 2.70 4 8 4.3
111 SMITH-COOPER NTER\ATIONAL" • TOLL FREE I-800-766-0076 • FAX(323)890-4456 • www.smithcouper-com
/, ` Ductile Iron Fittings- Class 300 UL/FM
UG?:L17Y PLUS.
c ® us
APPROVED
Fig. 35RT3-Reducing Tee LISTED
JSize A B C Packing Weight
Part Number
INI in in in n Inner Master lb
120
60
i C 3/4x 1/2 35RT3006004 1.20 1.20 1.22 60 0.4
x 1/2 35RT3010004 1.26 1.26 1.36 30 0.6
0.6
'i-- 1 x 1/2 x I 35RT3010004010 1.50 1.36 1.50 30 60
a
- I x 3/4 358T3010006 1.38 1.38 1.45 25 50 0.6
1 x 3/4 x 3/4 350 13010006006 1.38 1.31 1.45 35 70 0.6
B
1 x3/4 x 1 35RT3010006010 1.50 1.45 1.50 25 50 0.7
1-1/4 x 1/2 35H13012004 1.34 1.34 1.53 20 40 0.8 ,
1-1/4 x 1/2 x 1-1/4 35RT3012004012 1.75 1.53 1.75 25 50 0.9
1-1/4 x 3/4 35RT3012006 1.45 1.45 1.62 15 30 0.9
1-114 x 3/4 x 1-1/4 35RT3012006012 1.75 1.62 1.75 20 40 1.0
1-1/4 x 1 35RT3012010 1.58 1.58 1.67 15 30 1.0
1-1/4 x 1 x 1/2 35R43012010004 1.34 1.26 1.53 25 50 0.7
1-1/4 x 1 x 3/4 35RT3012010006 1.45 1.38 1.63 20 40 0.8
1-1/4 x 1 x 1 351143012010010 1.58 1.50 1.69 20 40 0.9
1-1/4 x 1 x 1-1/4 35RT3012010012 1.75 1.69 1.75 15 30 1.0
1-1/2 x 1/2 350T3014004 1.41 1.41 1.66 16 32 1.0
1-1/2 x 1/2 x 1-1/4 35RT3014004012 1.81 1.56 1.88 24 48 1.1
1-1/2 x 1/2 x 1-1/2 35RT3014004014 1.94 1.66 1.94 12 24 1.2
1-1/2x3/4 35013014006 1.52 1.52 1.75 16 32 1.1
1-112 x 3/4 x 1-1/4 35RT3014006012 1.94 1.66 1.88 20 40 1.1
1-1/2 x 3/4 x 1-1/2 35RT3014006014 1.94 1.75 1.94 18 36 1.2
1-1/2 x 1 35RT3014010 1.65 1.65 1.80 12 24 1.2
1 1/2 x 1 x 1/2 35013014010004 1.44 1.25 1.69 20 40 0.8
1-1/2 x 1 x 3/4 35RT3014010006 1.50 1.44 1.75 16 32 0.9
1-1/2x 1 x 1 35RT3014010010 1.65 1.50 1.80 16 32 1.0
_ 1-1/2 x 1 x 1-1/4 35RT3014010012 1.82 1.67 1.88 12 24 1.2
1-1/2 x 1 x 1-1/2 350T3014010014 1.94 1.80 1.94 12 24 1.3
1-1/2 x 1-1/4 35RT3014012 1.82 1.82 1.88 12 24 1.4
1 1/2 x 1-1/4 x 1/2 358113014012004 1.41 1.34 1.66 16 32 0.9
1-1/2 x 1-1/4 x 3/4 35RT3014012006 1.52 1.45 1.75 16 32 1.0
1 1/2 x 1-1/4 x 1 356T3014012010 1.65 1.58 1.80 16 32 1.1
1-1/2 x 1-1/4 x 1-1/4 35RT3014012012 1.82 1.75 1.88 14 28 1.3
1-1/2 x 1 1/4 x 1-1/2 35RT3014012014 1.94 1.88 1.94 14 28 1.4
2 x 1/2 35RT3020004 1.49 1.49 1.88 10 20 1.5
2 x 3/4 35013020006 1.60 1.60 1.97 10 20 1.6
2 x 1 35RT3020010 1.73 1.73 2.02 8 16 1.7
2 x 1 x 2 35013020010020 2.25 2.02 2.25 8 16 1.9
2 x 1-1/4 35RT3020012 1.90 1.90 2.10 8 16 1.9
2 x 1-1/4 x 2 35R13020012020 2.25 2.10 2.25 8 16 2.0
2 x 1-1/2 35843020014 2.02 2.02 2.16 8 16 2.1
2 x 1-1/2 x 1/2 35RT3020014004 1.49 1,41 1.88 10 20 1.3
2 x 1-1/2 x 3/4 35RT3020014006 1.60 1.52 1.97 10 20 1.4
2 x 1-1/2 x 1 35RT3020014010 1.73 1.65 2.02 8 16 1.5 ,
2 x 1-1/2 x 1-1/4 35RT3020014012 1.90 1.82 2.10 8 16 1.7
2 x 1-1/2 x 1-1/2 35RT3020014014 2.02 1.94 2,16 8 16 1.8
Fig. 35RT3-Bull Head Tee
Size A B C Packing Weight
+N
I� in Part Number in in in Inner Master lb
314 x 1 350 13006010 1.45 1.45 1.37 30 60 0.6
�1 1 1 x 1-1/4 35BT3010012 1.67 1.67 1 58 20 40 0.9
1 x 1-1/2 35B13010014 1.80 1.80 1.65 15 30 1.0
° .---.I.--) 1-1/4 x 1 x 1-1/2 35813012010014 1,88 1.80 1.82 15 30 1.2
1-1/4x1-1/2 35BT3012014 1.88 1.88 1.82 15 30 1.3
1-1/4 x 2 35BT3012020 2,10 2.10 1.90 10 20 1.6
1-1/2 x 1-1/4 x 2 35BT3014012020 2.16 2.10 2.02 10 20 1.8
1-1/2 x 2 35BT3014020 2.16 2.16 2.02 8 16 1.8
SNITH-c00PER INTERNATIONAL- • TOLL FREE 1-800-766-0076 • FAX(3231890-4456 • wwwsmithcooper.cum 112
Li Ductile Iron Fittings- Class 300 UL/FM
i f/OA.LI'II YLUS
C ® US
APPROVED I
A
Fig. 35CP3 -Straight Coupling with Ribs LISTED
Size Part Number A Packing Weight
in in Inner Master lb
_ 112 35C53004 1,38 200 400 0.1
Nil
3/4 35CP3006 1.63 100 200 0.2
1 350P3010 175 60 120 0.4
1-1/4 35CP3012 2.00 35 70 0.5
1-1/2 35CP3014 2.19 25 50 0.7
2 35CP3020 2.62 15 30 1.2
2-1/2 35CP3024 3.00 9 18 2.2
Fig. 35RC3 -Hex Reducing Coupling
Size part Number A Packing Weight
tar in in Inner Master lb
A 1 x 1/2 355C3010004 1.69 BC 160 0.3
1 x 3/4 35RC3010006 1.69 60 120 0.4
_ 1-1/4 x 3/4 35523012006 2.06 40 80 0.6
2 x 1 (not hex) 35RC3020010 2.81 20 40 1.0
Fig. 35HB3 -Hex Bushing
Size Part Number A Packing Weight
g in in Inner Master lb
1 x 1/2 35H03010004 1.06 180 360 0.2
1 x 3/4 35H83010006 1.06 180 360 0.1
�� 1 III 1 r
�A 1-1/4x 1 35HB3012010 1,19 90 180 0.2
-1/2 x 1 35HB3014010 1.25 75 150 0.4
1-1/2 x 1-1/4 35HE33014012 1,25 75 150 0.3
2 x 1 35HB3020010 1.38 40 80 0.6
2 x 1-1/4 35HB3020012 1.38 40 BC 0.6
2 x 1-1/2 35HB3020014 1.38 40 80 0.6
Fig. 35SP3 -Square Head Plug
Size Part Number A Packing Weight
in in Inner Master lb
1/2 35SP3004 0-94 600 1200 0.07
A 3/4 35SP3006 1.12 350 700 0.1
1 35SP3010 125 200 400 0.1
1-1/4 35SP3012 1.37 100 200 0.3
1-1/2 35SP3014 1-44 80 160 0.4
2 35SP3020 1.50 45 90 0.6
Fig. 35U 3- Union with Brass Seat
A Size A Packing Weight
Part Number
11106 in in Inner Master lb
.,. �L ''`= 1 35U 3010 2.19 20 40 1,0
1 � � �I� 1-1/4 35U 3012 2.50 15 30 L2
1- /2 35U 3014 2.62 10 20 1,7
1gigh.i= 2 35U 3020 3.12 6 12 2,4
113 S\II"I'H-COOPER INTERNATIONAL' • TOLL FR1?E: I-800-766-0076 • FAX(323)890--1456 • www.smithcuopcccum
XC*
- �' Ductile Iron Fittings- Class 300 UL/FM
[.,_QUALITY PLUS.
c ® us
APPROVED
Fig. 35X 3- Cross LISTED
f-a1f-'' Size A Packing Weight
ii1 � Part Number in in Inner Master lb
. 1 IA 1 35X 3010 1.50 20 40 0.9
1-1/4 35X 3012 75 12 24 1.4
� II 1-1/2 35X 3014 1.94 8 16 1.8
INI IA 2 35X 3020 2.25 6 12 2.8
ifit
B 1----) Fig. 35RX3-Reducing Cross
Size A B Packing Weight
Part Number
0. A in in in inner Master lb
low i Ida1 1-1/4 x 1 358X3012010 1.67 1.58 15 30 1.2
w T
1 + 1/2z 1 358X3014010 1.80 65 12 24 1.4
1 IA 2 x 1 35RX3020010 202 1.73 8 16 20
mliiiiirl
Fig. 35C 3-Cap
Size Part Number A Packing Weight
in in Inner Master lb
A 1/2 35C 3004 0.87 300 600 0.1
3/4 35C 3006 0.97 200 400 0.1 a.
- 1 1 35C 3010 1.16 110 220 0,2 ^'
1-1/4 35C 3012 1.28 70 140 0.4 U
1-1/2 35C 3014 1.33 50 100 0.5 C
2 35C 3020 1.45 25 50 0.8 T
2-1/2 35C 3024 1.70 18 36 1,6
L
E
Fig. 35BC3-Beam Clamp
Size A Packing Weight
l Part Number
A n in Inner Master I6
3/8 358C3003 0.75 100 200 0,3
1/2 35BC3004 0.75 80 160 0.5
L.r
SMITH-COOPER INTERNATIONAL' • TOLL FREE 1-800-766-0076 • FAX(323)890-4456 • v w.smithcooper.com 114
Pie Hangers
ers 9
Fig. 200 - "Trimline" Adjustable Band Hanger (B-Line Fig. B317ONF) tBtTol.Cn
Fig. 200F- "Trimline" Adjustable Band Hanger with Felt Lining (B-Line Fig.B317ONFF) UL us
Fig. 200C- "Trimline" Adjustable Band Hanger with Plastic Coated (B-Line Fig.B317ONFC) ttsreo
Fig. 200S - "Trimline" Adjustable Band Hanger with Non-Captured Nut
lit
Size Range:
Fig. 200 - 1/2" (15mm)thru 8" 1200mm)pipe
Material: Steel, Pre-Galvanized to G90 specifications ,.I�
, Function: For fire sprinkler and other general piping purposes. Knurled
swivel nut design permits hanger adjustment after installation.
Features: , ii",
\
• (112" (15mm)thru 2" f50mmO Flared edges ease installation for all pipe
types and protect CPVC plastic pipe from abrasion. Captured design '•/
keeps adjusting nut from separating with hanger. Hanger is easily n - s
installed around pipe. A
For hanger with non-captured nut order Fig. 200S. a' i,
• (21/2" (65mm)thru 8" (200mm)) Spring tension on nut holds it securely in
hanger before installation. Adjusting nut is easily removed.
Approvals: Underwriters Laboratories listed (1/2" 115mm)thru 8" (2oomm)) Fig.700-1/2.200 324
in the USA(ULI and Canada (cUL)for steel and CPVC plastic pipe and !='
Factory Mutual Engineering Approved(FM) (3/4" (20mm)thru 8" (200mm)). Fig.Zee-1 to Z002 Fig.20024z to 200-8
Conforms to Federal Specifications WW-H-171 E&A-A-1192A,Type 10
and Manufacturers Standardization Society ANSI/MSS SP-69&SP-58,
Type 10.
Maximum Temperature: 650°F(343°C) 1,.0 'i,';, "
Finish: Pre-Galvanized. Stainless Steel
f7n ;, ;"
materials will be supplied with (2) hex nuts -
in place of a knurl nut. , t'
Order By: Figure number and pipe size f
Designed to meet or exceed requirements of ;
FM DS 2-0.
aik k, tviak lr 5i;a,.
S i Fig.200
Fig.200C Fig.200F
Pipe Size Rod Size A B Approx.Wt./100
Part No. in. (mml in. (mm) in. (mm) lbs. (kg) '""r'w"`'
200-1/2 1/2" (15) 3/B"-16 31/8" (79.4) 25/8' (66.7) 11 (5.0)
200-3/4 3/4" (20) 3/8"-16 31/8" (79.4) 21/7" (63.5) 11 (5.0)
200-1 1" (25) 3/8"-16 33/8" (85.7) 25/8" (66.7) 12 (5.5)
' 200-11/4 11/4" (32) 3/8'-16 33/4" (94.0) 27/s" (73.0) 13 (5.9)
200-11/2 11/2" (40) 3/8'-16 37/8" (98.4) 27/8" (73.0) 14 (6.4)
200-2 2' (50) 3/8"-16 41/2' (114.3) 3" (76.3) 15 (6.9)
200-21/2 21/2' 1651 3/8'-16 55/s" (142.9) 41/8" (104.7) 27 (12.3) i
200-3 3' (75) 3/8"-16 57/8' (149.1) 4" (101.6) 29 (13.31 Fig.200S
200-31/2 31/2" (90) 3/8"-16 73/8' (187.3) 51/4" (133.3) 34 (15.61
200-4 4' (100) 3/8"-16 73/s" (187.3) 5' (127.01 35 (16.01
200-5 5' (125) 1/2"-13 91/9" (231.8) 61/4" 1158.71 66 (30.2)
200-6 6' (150) 1/2'-13 101/8" (257.2) 63/4" (171.4) 73 (33.4)
200-8 8' (200) 1/2'-13 131/e" (333.4) 83/4" (222.2) 136 (62.3)
All dimensions in charts and on drawings are in inches.Dimensions shown in parentheses are in millimeters unless otherwise specified.
B-Line
Fire Protection Solutions 27
by E�T•N
Threaded Accessories
B3205 - Threaded Rod (right-hand threads - both ends) (roLCo Fig.103)
B3205L - Threaded Rod (right & left hand threads) TL :)
Specify Length �))
Size Range: 3/8"-16 thru 3"-4 rod •L•����
Material: Steel
Function: Recommended for use as a hanger support in hanger assemblies. TI.
Rod is threaded on both ends with right hand threads of the length shown.Also
available with left and right hand threads-specifyFig. B3205L when ordering. A
9 Thread Size
Maximum Temperature: 750°F(399°C)
Finish: Plain.Contact B-Line for alternative finishes and materials. r
Order By: Part number, rod size, length and finish
Standard Design Load
Thread Size Thread Length TL 650°F(343°C) 750°F(399°C)
Part No. A in. (mm) Lbs. (kN) Lbs. (kN)
83205-3/8 x'L' 3/8"-16 21/2" (63.5) 730 (3.25) 572 (2.54)
B3205-1/2 x'L' 1/2"-13 21/2" (63.5) 1350 (6.00) 1057 (4.70)
B3205-5/e x'L' 5/8"-11 21/2" (63.5) 2160 (9.61) 1692 (7.52)
83205-3/4 x'L' 3/4"-10 3" (76.2) 3230 (14.37) 2530 (11.25)
B3205-7/6x'12 7/e"-9 31/2" (88.9) 4480 (19.93) 3508 (15.60)
133205-1 x'L' 1"-8 4" (101.6) 5900 (26.24) 4620 (20.55)
B3205-11/0 x'L' 11/8"-7 41/2" (114.3) 7450 (33.14) 5830 (25.93)
B3205-11/4 x'L' 11/4"-7 5" (127.0) 9500 (42.25) 7440 (33.09)
B3205-11/2 x11.' 11/2"-6 6" (152.4) 13800 (61.38) 10807 (48.07)
83205-13/4 x'L' 13/4"-5 7" (177.8) 18600 (82.73) 14566 (64.79)
B3205-2x'L' _ 2'-41/2 8" (203.2) 24600 (109.42) 19625 (87.29)
83205-21/4 x'L' 21/4"-41/2 9" (228.6) 32300 (143.67) 25295 (112.51)
83205-21/2 x'L' 21/2"-4 10" (254.0) 39800 (177.03) 31169 (138.64)
B3205-23/4 x'12 23/4"-4 11" (279.4) 49400 (219.73) 38687 (172.08)
83205-3 x'L' 3"-4 12" (304.8) 60100 (267.32) 47066 (209.35)
ATR - All Threaded Rod 120" (3.05m) Lengths (TOLCO Fig.100)
Fig. 99 -All Threaded Rod Cut To Length � �
i..
Size Range: 3/8"-16 thru 11/2"-6 rod in 120"(3.05m)lengths or cut to length � �
Material: Steel "
9 W
Maximum Temperature: 750°F(399°C) `' m o
Finish: Plain.Contact B-Line for alternative finishes and materials. 2 u
Order By: Part number, rod diameter and finish ` a •
Part No.-Size x Length Threads Recommended Load Approx.Wt./100 Ft.
ATR Fig.99 Per Inch Lbs. (kN) Lbs. (kg)
AIR 1/4"x 120 99-1/4"x length 20 240 (1.07) 12 (5.44)
ATR Ye"x 120 99-3/a"x length T 16 730 (3.24) 29 (13.15)
ATR 1/2"x 120 99-1/2"x length 13 1350 (6.00) 53 (24.04)
ATR 5/e"x 120 99-5/8"x length 11 2160 (9.60) 89 (40.37)
ATR 3/4"x 120 99-3/4"x length 10 3230 (14.37) 123 (55.79)
ATR 7/8"x 120 99-7/8"x length 9 4480 (19.93) 170 (77.11)
ATR 1"x 120 99-1"x length 8 5900 (26.24) 225 (102.06)
All dimensions in charts and on drawings are in inches.Dimensions shown in parentheses are in millimeters unless otherwise specified.
Pipe Hangers&Supports 236 Revised4/28/2014 B-Line
by EIT•N