Permit (10) CITY OF TIGARD BUILDING PERMIT
` 1111
' COMMUNITY DEVELOPMENT Permit#: BUP2022-00179
Date Issued: 8/8/2022
T l G A R D 13125 SW Hall Blvd.,Tigard OR 97223 503.718.2439 Parcel: 1 S 126DC00901
Jurisdiction: Tigard
Site address: 9660 SW GREENBURG RD
Project: Terrace Glen Apartments-East Building Subdivision: TERRACE GLEN APARTMENTS Lot: None
Project Description: Installing 173 KW roof mounted solar photovoltaic system.
Contractor: IMAGINE ENERGY LLC Owner: GETHSEMANE EVANGELICAL
5506 SE INTERNATIONAL WAY LUTHERAN CHURCH
MILWAUKIE, OR 97222 9640 SW GREENBURG RD
PORTLAND, OR 97223
PHONE: 503-477-9585 PHONE:
FAX:
Specifics: FEES
Description Date Amount
Type of Use: MF
Class of Work: OTR Type of Const: VB Permit Fee-Additions,Alterations, 08/08/2022 $1,697.87
Occupancy Grp: R-2 Occupancy Load: 0 Demolition
12%State Surcharge-Building 08/08/2022 $203.74
Dwelling Units: Plan Review 07/14/2022 $1,103.62
Stories: Height: ft
Info Process/Archiving-Sm$0.50(up to 08/08/2022 $6.00
Bedrooms: Bathrooms: 11x17)
Value: $198,000
Floor Areas:
Total Area:
Accessory Struct:
Basement:
Carport:
Covered Porch:
Deck:
Garage:
Mezzanine:
Total $3,011.23
Required: Required Items and Reports(Conditions)
Fire Sprinkler: Parapet:
Fire Alarm: Protected Corridors:
Smoke Detectors: Manual Pull Stations:
Accessible Parking:
This permit is issued subject to the regulations contained in the Tigard Municipal Code, State of OR. Specialty Codes and all other applicable law. All work
will be done in accordance with approved plans. This permit will expire if work is not started within 180 days of issuance, or if work is suspended for more
the 180 days. ATTENTION: Oregon law requires you to follow the rules adopted by the Oregon Utility Notification Center. Those rules are set forth in OAR
952-001-0010 through OAR 952-001-0090. You may obtain a copy f the rules or direct questions to OUNC by calling 503.232.1987 or 1.800.332.2344.
Issued By: 4"4
Permittee Signature: CC," /^5,_' -e,e4 ".:j
Call 503.639.4175 by 7:00 a.m.for the next available inspection date. C%,/� %� rG/J
This permit card shall be kept in a conspicuous place on the job site until completion of the project.
Approved plans are required on the job site at the time of each inspection.
Building Permit Application
Commercial FoR 0111( 1: 1 sI:0y1.N
City of Tigard RECEI VET. � RDateBya 7/13 >2 for- `t d602—D0177
IN a:'. 13125 SW Hall Blvd.,Tigard,OR 97223 Plan Review
Phone: 503-718-2439 Fax: 503-598-1960 JUL 1 DateBy: 7' •� t ►''( e 041 ��
Inspection Line: 503-639-4175 3 2022 Date ReadyBy Jj / Suns H See Page 2 for
TIGARD Internet: www.tigard-or.gov T.,n Notified/Me•..��%%���/// /L��/ Supplemental Information
a
TYPE OF WORK ` ,, R QUIRED DATA:I-AND 2-FAMILY DWELLING
❑New construction ❑Demolition Permit fees*are based on the value of the work performed.
Indicate the value(rounded to the nearest dollar)of all
0 Addition/alteration/replacement ❑Other: equipment,materials,labor,overhead,and the profit for the
CATEGORY OF CONSTRUCTION work indicated on this application.
Valuation: $
❑ 1-and 2-family dwelling I]Commercial/industrial
Number of bedrooms:
ElAccessory building ❑Multi-family
❑Master builder ❑Other: Number of bathrooms:
JOB SITE INFORMATION AND LOCATION Total number of floors:
Job site address:9660 SW GREENBURG RD. New dwelling area: square feet
City/State/ZIP:TIGARD, OR 97223 Garage/carport area: square feet
Suite/bldg./apt.#: Project name:TERRACE GLENT C 45 T Covered porch area: square feet
Cross street/directions to job site: EAST OF SW 92ND AVE Deck area: square feet
Other structure area: square feet
REQUIRED DATA:COMMERCIAL-USE CHECKLIST
Subdivision: I Lot#: Permit fees*are based on the value of the work performed.
Indicate the value(rounded to the nearest dollar)of all
Tax map/parcel#: equipment,materials,labor,overhead,and the profit for the
elf) DESCRIPTION OF WORK work indicated on this application. .rf
/ KW SOLAR PHOTOVOLTAIC SYSTEM,ROOF MOUNTED.THIS PROJECT ENTAILS THE INSTALLATION Valuation. $$ $e'OO' Mir p�
OF SOLAR PHOTOVOLTAIC(PV)MODULES, GRID-INTERACTIVE INVERTERAND ASSOCIATED EQUIPMENT Existing building area: square feet
TO SUPPLY POWER DIRECTLY TO THE EXISTING ELECTRICAL DISTRIBUTION SYSTEM OF THE BUILDING. New building area: square feet
(al PROPERTY OWNER 0 TENANT Number of stories:
Name:TERRACE GLENN HOUSING PARTNERS,LP-(Contact)Kent Usher Type of construction:
Address:208 SW FIRST AVE. Occupancy groups:
City/State/ZIP:PORTLAND OR. 97204 Existing:
Phone:( )503-222-4375 Fax:( ) New:
® APPLICANT 0 CONTACT PERSON BUILDING PERMIT FEES*
(Please refer w fee sehedute)
Business name:IMAGINE ENERGY LLC
Structural plan review fee(or deposit):
Contact name:MARY LAUGHLIN
FLS plan review fee(if applicable):
Address:5506 SE INTERNATIONAL WAY
Total fees due upon application:
City/State/ZIP:MILWAUKIE OR 97222
Amount received:
Phone:( )971-207-2494 Fax: :( )
E-mail:M.LAUGHLIN@IMAGINEENERGY.NET PHOTOVOLTAIC SOLAR PANEL SYSTEM FEES*
— Commercial and residential prescriptive installation of
CONTRACTOR roof-top mounted Photo Voltaic Solar Panel System.
Business name:IMAGINE ENERGY LLC Submit two(2)sets of roof plan with connection details
and fire department access,along with the 2010 Oregon
Address:5506 SE INTERNATIONAL WAY Solar Installation Specialty Code checklist.
City/State/ZIP:MILWAUKIE OR 97222 Permit fee(includes plan review $180.00
and administrative fees):
Phone:( )503-477-9585 Fax:( ) State surcharge(12%of permit fee): $21.60
CCB Lic.:167963 Total fee due upon application: $201.60
Authorized signature: LazadViii This permit application expires if a permit is not obtained
within 180 days after it has been accepted as complete.
Date:7/13/2022 * Fee methodology set by Tri-County Building Industry
Print name:Mary Laughlin Service Board.
I:\Building\Permits\BUP_COM_PermitApp.doc Rev.04/21/2014 440-4613T(11/02/COM/WEB)
4, F. „ Prescriptive Solar Photovoltaic Installation Checklist
('-(=).14) 2019 Oregon Structural Specialty Code (O
SSC)
� , Compliance RECEIVED
Use this checklist to demonstrate compliance with the prescriptive photovoltaic(PV)requiremerit'-o S$ ns
3111.3.5.3 and 3111.3.4.8 of the Oregon Structural Specialty Code(OSSC). Separate electric prtOsRyiwired for
the installations. � ,i' r' r"- rwrIr,t
PART I—PROPERTY OWNER INFORMATION
Property owner name:Contact - KENT USHER Phone number:503-222-4375
Installation address:9660 SW GREENBURG RD. 61,0_1-7 - A51
City:TIGARD State: Oregon ZIP:97223
Structure on which modules are to be installed:Apartment complex
Installer: ❑Q Contractor El Owner(If owner, skip to Part III)
PART II—CONTRACTOR INFORMATION
Contractor name:Imagine Energy LLC Phone number:971-207-2494
Email address:m.laughlin@imagineengergy.net
BCD business license#:C 1 174 Contractor's CCB#: 167963
PART III—STRUCTURAL CRITERIA
Roof structure requirements
If"No"is selected for any item below, or if the supporting structure is a manufactured dwelling, the project may not be
submitted using the prescriptive path.
Check the appropriate boxes for each item as it applies to the project.
• Structure is classified Risk Category I or II in accordance with OSSC 1604.5: Yes ❑ No
• Structure is of conventional light frame construction: ❑■ Yes ❑ No
• Supporting roof framing is one of the following: ❑■ Yes ❑ N• o
(check one) ❑■ Pre-engineered trusses spaced<24 inches o.c.;or
❑ Rafters spaced<24 inches o.c.and spans comply with OSSC 2308.7.2 or ORSC R802.5,respectively
• Ground snow load does not exceed maximum load: ❑Q Yes ❑ N• o
(check one) ❑ <50 psf for structures under the ORSC,or ❑ <70 psf for structures under the OSSC
• The basic design wind speed does not exceed the following: ❑Q Yes ❑ N• o
(check one) El <120 mph in Wind Exposure Category C for structures under the OSSC;or
<135 mph in Wind Exposure Category B for structures under the OSSC;or
El < 135 mph in Wind Exposure Category C for structures under the ORSC
• Roofing materials are metal,single-layer wood shingle or shake, or
not more than two layers of composition shingle: 0 Yes ❑ No
• Module height is less than 18 inches from the top of the module to the roof surface and
complies with Figures 3111.3.5.3(1)and 3111.3.5.3(2): ❑Q Yes ❑ N• o
BCD I Building
Codes
Division Published by Building Codes Division—Aug. 18, 2021
Department of Consumer
and Business Services
PART III —STRUCTURAL CRITERIA(continued)
Loading requirements
Check the appropriate boxes for each item associated with the selected attachment method.
❑ Attachment 1: PV modules or racking is attached directly to the roof framing or blocking:
• Combined weight of PV modules and racking is not more than 4.5 psf: ❑Q Yes ❑ No
• Spacing of PV modules or racking complies with one of the following: 0 Yes ❑ No
(check one) 0 <48 inches in any direction;or
❑ <24 inches in any direction where the following are true:
• Ground snow load is more than 36 psf
• Panels are located within 3 feet of a roof edge,hip,eave,or ridge
• Basic design wind speed is greater than 120 mph in Wind Exposure Category B
• Basic design wind speed is greater than 110 mph in Wind Exposure Category C
*If this is the appropriate attachment method and "No"is selected for any of the items above, the project may not
be submitted using the prescriptive path.
❑ Attachment 2: PV modules or racking is attached directly to standing seam metal panels:
• Combined weight of PV modules and racking is not more than 4.5 psf: 0 Yes ❑ No
• Clamps comply with the following requirements:
• Provide the following, allowable uplift capacity: 0 Yes ❑ No
(check one) ❑ Not less than 115 pounds and spaced at 60 inches o.c.or less;or
E Not less than 75 pounds and spaced at 48 inches o.c.or less.
• Spacing between metal panel seams is not more than 24 inches Q Yes ❑ No
• Spacing along a metal panel seam is not more than 60 inches 0 Yes n No
• Metal roofing panels comply with the following requirements:
• Panel thickness is 26 gauge steel,minimum a Yes ❑ No
• Panel width is 18 inches or less ❑■ Yes ❑ No
• Attached with at least#10 screws at 24 inches o.c. 0 Yes ❑ No
• Installed over minimum 'h-inch nominal wood structural panels attached to framing
with 8d nails at 6 inches o.c. at panel edges and 12 inches o.c. field nailing 0 Yes ❑ No
*If this is the appropriate attachment method and "No"is selected for any of the items above, the project may not
be submitted using the prescriptive path.
PART IV—ROOF DESIGN SITE PLAN
Roof design requirements
• Attach a simple structural plan showing the roof framing(rafter size,type,and spacing)and PV system racking
attachment.
• System must be shown in sufficient detail to assess whether the requirements of Section 3111.3.5.3 have been met.
• The structural plan must be on 8.5-inch x 11-inch or larger paper.
PART V—PV MODULES
Manufacturer:CANADIAN SOLAR
Model number:CS3W-460MS
Listing agency:Imagine Energy LLC
[2]
PART VI — PATHWAYS AND CLEARANCES
Pathway and clearance requirements
• Using the grid below or an attached 8.5-inch x 11-inch or larger paper,provide a simple drawing, indicating the
location of the PV system in relation to buildings,structures,property lines,and,as applicable,flood hazard areas.
• The drawing must be shown in sufficient detail to assess whether the pathway requirements of Section 3111.3.4.8 or
one of the exceptions have been met.
[3]