Report TFP171
Page 2 of 12
*Temperature rating ** Pipe thread connections per 1 - Frame 3 - Sealing 5 - Compression
is indicated on ISO 7-1 can be provided on ESCUTCHEON 2 - Button Assembly Screw
Deflector. special request. PLATE SEATING 4 - Bulb 6 - Deflector*
SURFACE 7 - Bushing
jr-j
�=7/16" ,NOMINAL 2-1/4 / ��-IN (57,2 mm)�� 2-3/16" 4
(55,6 mm) i 1-9/16" 410
(39,7II mm) 5
111
1 1 ffir\s, \ 6*
1/2"NPT** t WRENCH STYLE 10 or 20 2-7/8"(73,0 mm)DIA. -
FLATS RECESSED
UPRIGHT PENDENT ESCUTCHEON RECESSED PENDENT CROSS SECTION
FIGURE 1
QUICK RESPONSE SERIES TY-FRB UPRIGHT(TY1131)AND PENDENT(TY1231)SPRINKLERS
2.8 K-FACTOR, 1/2 IN.NPT
*Temperature rating ** Pipe thread connections per 1 - Frame 3 - Sealing 5 - Compression
is indicated on ISO 7-1 can be provided on ESCUTCHEON 2 - Button Assembly Screw
Deflector. special request. PLATE SEATING 4 - Bulb 6 - Deflector*
SURFACE
1
------ I / �_-
r 3
7/16" ems: \1r
(11,1 mm)
NOMINAL • I 2-3/16" ��l�� 2
MAKE-IN I
(55,6 mm)
2-3/16" 4
(55,6 mm) i ii 1-1/2"
1 (38,1mm) M _5
6*
1/2"NPT** t WRENCH STYLE 10 or 20 2-7/8"(73,0 mm)DIA. -
FLATS RECESSED
UPRIGHT PENDENT ESCUTCHEON RECESSED PENDENT CROSS SECTION
FIGURE 2
QUICK RESPONSE SERIES TY-FRB UPRIGHT(TY2131)AND PENDENT(TY2231)SPRINKLERS
4.2 K-FACTOR, 1/2 IN. NPT
Discharge Coefficient Poly-Stainless Design
K=2.8 GPM/psi%(40,3 LPM/bari) Physical Characteristics
K=4.2 GPM/psis(60,5 LPM/bares) Frame Bronze
K=5.6 GPM/psi!(80,6 LPM/bari) Button L316 Stainless Steel* Criteria
K=8.0 GPM/psis(115,2 LPM/bar'i) Bulb Glass
Compression Screw L316 Stainless Steel* The TYCO Series TY-FRB 2.8,4.2,5.6,
Temperature Rating Deflector Copper/Bronze and 8.0 K-factor Upright, Pendent,
See Tables A and B Sealing Assembly.Gold Plated Beryllium Nickel and Recessed Pendent Sprinklers are
w/TEFLON intended for fireprotection systems
'Type L316 stainless steel(UNS 31603)per ASTM
Sprinkler:See Table D A479/479M or Bs EN 1008 WN1.4404. designed in accordance with the stan-
Recessed Escutcheon:Signal or Pure White, dard installation rules recognized by
Grey Aluminum,Jet Black,Chrome Plated, Operation the applicable Listing or Approval
or Natural Brass agency, such as UL Listing based on
The glass bulb contains a fluid that the requirements of NFPA 13 and FM
Physical Characteristics expands when exposed to heat.When Approval based on the requirements
Frame Bronze the rated temperature is reached, the of the FM Global Loss Prevention Data
Button
y Beryllium NickelrBrass/Copper
fluid expands sufficiently to shatter the Sheets.Use only the style 10,20,30,or
SealingAssembly glass bulb, allowingthe sprinkler to
Bulb Glass p 40 Recessed Escutcheon, as applica-
Compression Screw Bronze activate and water to flow. ble,for recessed pendent installations.
Deflector Copper/Bronze
Bushing(K=2.8) Bronze
TFP171
Page 3 of 12
*Temperature rating ** Pipe thread connections per 1 - Frame 3 - Sealing 5 - Compression
is indicated on ISO 7-1 can be provided on 2 - Button Assembly Screw
Deflector. special request. ESCUTCHEON 4 - Bulb 6 - Deflector*
PLATE SEATING
SURFACE
I \'
n 1
7/16" r�—NOMINAL 2-3/16" L'-�=� MAKE-IN /A.0 I (55,6 mm)I / LL (55.6/mm 1-1/2" �1� 4
A (38,1IImm) III- _5
�k..1 I 1 �c�—ors- 6*
1/2"NPT** t WRENCH STYLE 10 or 20 2-7/8"(73,0 mm)DIA.
FLATS RECESSED
UPRIGHT PENDENT ESCUTCHEON RECESSED PENDENT CROSS SECTION
ALL FINISHES EXCEPT POLY-STAINLESS
WRENCH 1/2" ESCUTCHEON 1 - Frame 3 - Sealing 5 - Compression *Temperature
FLATS NPT PLATE SEATING 2 - Button Assembly Screw rating indicated
SURFACE 4 - Bulb 6 - Deflector* on Deflector.
I 1
rTr
7/16" 'ElltM=/ I _.--... -
10MINAL 1.1
23/16" 2
` . MAKE-IN I (55 - 4
2-3/16" 1-1/2"
(55,6 mm) (38,1 mm),6 mm) `ly
-_�,A�"- 6*
t STYLE 10 —P-7/8"(73,0 mm)DIA. -
RECESSED
UPRIGHT PENDENT ESCUTCHEON RECESSED PENDENT CROSS SECTION
POLY-STAINLESS FINISH ONLY
FIGURE 3
QUICK RESPONSE SERIES TY-FRB UPRIGHT(TY3131)AND PENDENT(TY3231)SPRINKLERS
5.6K-FACTOR, 1/2 IN. NPT
Installation of the sprinkler.Do not attempt to corn- Series TY-FRB Recessed Pendent
pensate for insufficient adjustment in Sprinklers
The TYCO Series TY-FRB 2.8,4.2,5.6, the escutcheon plate by under-or over- The Series TY-FRB Recessed Pendent
and 8.0 K-factor Upright,Pendent,and tightening the sprinkler. Re-adjust the Sprinklers must be installed in accor-
Recessed Pendent Sprinklers must position of the sprinkler fitting to suit. dance with the following instructions:
be installed in accordance with this Series TY-FRB Upright and Pendent Step 1.After installing the Style 10,20,
section. Sprinklers 30, or 40 Mounting Plate, as applica-
General Instructions The Series TY-FRB Upright and ble,over the sprinkler threads and with
Do not install any bulb type sprinkler Pendent Sprinklers must be installed pipe-thread sealant applied to the pipe
if the bulb is cracked or there is a loss in accordance with the following threads,hand-tighten the sprinkler into
of liquid from the bulb.With the sprin- instructions: the sprinkler fitting.
kler held horizontally,a small air bubble Step 1.Install pendent sprinklers in the Step 2. Tighten the sprinkler into the
should be present.The diameter of the pendent position. Install upright sprin- sprinkler fitting using only the W-Type 7
air bubble is approximately 1/16 in. klers in the upright position. Recessed Sprinkler Wrench,see Figure
(1,6 mm) for the 135°F (57°C) and 2. With pipe thread sealant 15. With reference to Figure 1 to 4,
3/32 in.(2,4 mm)for the 286°F(141°C) Stepe to the pipe threads, hand-
temperature
the W-Type 7 Recessed Sprinkler
temperature ratings.A leak-tight 1/2 in. Wrench to the sprinkler wrench flats.
tighten the sprinkler into the sprinkler
NPT sprinkler joint should be obtained fitting. Step 3.After the ceiling is installed or
by applying a minimum-to-maximum the finish coat is applied, slide on the
torque of 7 to 14 lb-ft(9,5 to 19,0 N•m). Step 3. Tighten the sprinkler into the Style 10, 20, 30, or 40 Closure over
A leak tight 3/4 in. NPT sprinkler joint sprinkler fitting using only the W-Type 6 the Series TY-FRB Recessed Pendent
should be obtained with a torque of Sprinkler Wrench(Ref.Figure 14).With Sprinkler and push the Closure over the
10 to 20 lb-ft(13,4 to 26,8 N.m).Higher reference to Figure 1 to Figure 5,apply Mounting Plate until its flange comes in
levels of torque can distort the sprinkler the W-Type 6 Sprinkler Wrench to the contact with the ceiling.
inlet and cause leakage or impairment sprinkler wrench flats.
TFP171
Page 4 of 12
*Temperature rating ** Pipe thread connections per 1 - Frame 3 - Sealing 5 - Compression
is indicated on ISO 7-1 can be provided on ESCUTCHEON 2 - Button Assembly Screw
Deflector. special request. PLATE SEATING 4 - Bulb 6 - Deflector*
SURFACE
_ 1
1/2"
3
(12,7 mm)
NOMINAL 2-5/16" m It .— 2
MAKE-IN (58,7 mm)
-14
7,2 m 1-9/16" I 4
1 (57,2 mm) (39,7 mm)
f s ___--5
6*
3/4"NPT** WRENCH STYLE 30 or 40 2.7/8"(73,0 mm)DIA.
FLATS RECESSED -
UPRIGHT PENDENT ESCUTCHEON RECESSED PENDENT CROSS SECTION
ALL FINISHES EXCEPT POLY-STAINLESS
WRENCH 3/4" ESCUTCHEON 1 - Frame 3 - Sealing 5 - Compression *Temperature
FLATS NPT PLATE SEATING 2 - Button Assembly Screw rating indicated
SURFACE 4 - Bulb 6 - Deflector* on Deflector.
rr rTITIYT-T t _ i
1/2" 3
1 (12,7 mm) 1.� W
NOMINAL u=U } 2-5/16" ii...
2
=� MAKE-IN 1001! (58,7 mm) wir`— 4
i I 2-1/4" 1-9/16"
1 (57,2 mm) (39,7 mm) ' "P
_
5
----•._., ----•._.. 6*
f STYLE 40 -.._2-7/8"(73,0 mm)DIA. -
RECESSED
UPRIGHT PENDENT ESCUTCHEON RECESSED PENDENT CROSS SECTION
POLY-STAINLESS FINISH ONLY
FIGURE 4
QUICK RESPONSE SERIES TY-FRB UPRIGHT(TY4131)AND PENDENT(TY4231)SPRINKLERS
8.0 K-FACTOR,3/4 IN.NPT
CEILING PLATE 1 - Frame 5 - Compression
SEATING SURFACE 2 - Button Screw
1 3 Sealing 6 - Deflector*
Assembly
3 4 - Bulb
7/16" �— 2-1/4"
(11,1 mm) I I 1 (57,2 mm) 2
NOMINAL
MAKE-IN *Temperature rating is
2-3/16" 1-9/16" 4 indicated on Deflector.
(55,6 mm") (39,7 mm")
__��5 ** Pipe thread connections
W -. -_ 6 * per ISO 7-1 can be
provided on special
1/2"NPT** f WRENCH request.
FLATS
UPRIGHT PENDENT CROSS SECTION
FIGURE 5
QUICK RESPONSE SERIES TY-FRB UPRIGHT(TY4831)AND PENDENT(TY4931)SPRINKLERS
8.0 K-FACTOR, 1/2 IN.NPT
TFP171
Page 5 of 12
2-7/8"DIA. 2-7/8"DIA.
5/8±1/4" (73,0 mm) 3/4"(19,1 mm) 1/2±1/8 (73,0 mm) 1/2"(12,7 mm)
(15,9±6,4 mm) 1/4"(6,4 mm) (12,7±3,2 mm) 1/4"(6,4
2-1/4"DIA. 2-1/4"DIA. mm)
/ FACE OF (57,2 mm) 1 (57,2 mm)
MOUNTING / FACE OF MOUNTING
SPRINKLER PLATE SPRINKLER PLATE
FITTING FITTING
1/8" / 1/8"
(3,2 mm) (3,2 mm)
177T
27.at
t ` t
f MOUNTING
MOUNTING SURFACE
SURFACE
1
CLOSURE SERIES 1-5/16"(33,3 mm) CLOSURE SERIES 1-5/16"(33,3 mm)
TY-FRB 13/16"(20,6 mm) TY-FRB 1-1/16"(27,0 mm)
FIGURE 6 FIGURE 7
SERIES TY-FRB RECESSED PENDENT SERIES TY-FRB RECESSED PENDENT
WITH TWO-PIECE 3/4 INCH TOTAL ADJUSTMENT WITH TWO-PIECE 1/2 INCH TOTAL ADJUSTMENT
STYLE 10 RECESSED ESCUTCHEON STYLE 20 RECESSED ESCUTCHEON
2.8 K-FACTOR, 1/2IN.NPT 2.8 K-FACTOR, 1/2IN.NPT
2-7/8"DIA. 2-7/8"DIA.
5/8±1/4" (73,0 mm) 3/4"(19,1 mm) 1/2±1/8 (73,0 mm) 1/2"(12,7 mm)
(15,9±6,4 mm) (6,4
1/4"(6,4 mm) (12,7±3,2 mm) 1/4"
2-1/4"DIA. 2-1/4"DIA. mm)
/ FACE OF (57,2 mm) 1 MOUNTING / FACE OF (57,2 mm) MOUNTING
SPRINKLER PLATE SPRINKLER PLATE
FITTING FITTING
/ 1/8" / 1/8"
(3,2 mm) ==1� �i. 177 T (3(3,2
mm)
44 7/ 1
j
\ MOUNTING ,Mill 7
MOUNTING SURFACE
SURFACE II ...
CLOSURE SERIES 1-1/4"(31,8 mm) CLOSURE SERIES 1-1/4"(31,8 mm)
TY-FRB 3/4"(19,1 mm) TY-FRB 1"(25,4 mm)
FIGURE 8 FIGURE 9
SERIES TY-FRB RECESSED PENDENT SERIES TY-FRB RECESSED PENDENT
WITH TWO-PIECE 3/4 INCH TOTAL ADJUSTMENT WITH TWO-PIECE 1/2 INCH TOTAL ADJUSTMENT
STYLE 10 RECESSED ESCUTCHEON STYLE 20 RECESSED ESCUTCHEON
4.2 K-FACTOR, 1/2 IN.NPT 4.2 K-FACTOR, 1/2 IN.NPT
TFP171
Page 6 of 12
2-7/8"DIA. 2-7/8"DIA.
5/8t1/4" (73,0 mm) 3/4"(19,1 mm) 1/2±1/8" (73,0 mm) 1/2"(12,7 mm)
(15,9±6,4 mm) 1/4"(6,4 mm) (12,7±3,2 mm) 1/4^
2-1/4"DIA. 2-1/4"DIA. (6,4 mm)
/ FACE OF (57,2 mm) MOUNTING / FACE OF (57,2 mm) —�
SPRINKLER MOUNTING
PLATE SPRINKLER PLATE
FITTING FITTING
/ 2m / 1/8"
(3,2 mm) (3,2 mm)
T M�_ r� PT/i,
} SURFACE
1411/ }
MOUNTING
SURFACE • -—�—-
CLOSURE SERIES 1-1/4"(31,8 mm) CLOSURE SERIES 1-1/4"(31,8 mm)
TY-FRB 3/4"(19,1 mm) TY-FRB 1"(25,4 mm)
FIGURE 10 FIGURE 11
SERIES TY-FRB RECESSED PENDENT SERIES TY-FRB RECESSED PENDENT
WITH TWO-PIECE 3/4 INCH TOTAL ADJUSTMENT WITH TWO-PIECE 1/2 INCH TOTAL ADJUSTMENT
STYLE 10 RECESSED ESCUTCHEON STYLE 20 RECESSED ESCUTCHEON
5.6 K-FACTOR, 1/2 IN.NPT 5.6 K-FACTOR, 1/2 IN.NPT
2-7/8"DIA. 2-7/8"DIA.
5/8±1/4" (73,0 mm) 3/4"(19,1 mm) 1/2t1/8" (73,0 mm) 1/2"(12,7 mm)
(15,9±6,4 mm) 2-1/4"DIA. 1/4"(6,4 mm) (12,7±3,2 mm) 2-1/4"DIA. 1/4"(6,4 mm)
/ FACE OF (57,2 mm) 1 MOUNTING / FACE OF (57,2 mm) MOUNTING
SPRINKLER PLATE SPRINKLER PLATE
FITTING FITTING
/ 1/8" 1/8"
(3,2 mm) / (3,2 mm)
\ } A
SURFACE
MOUNTINGMOUNTING
SURFACE r
CLOSURE SERIES 1-5/16"(33,3 mm) CLOSURE SERIES 1-5/16"(33,3 mm)
TY-FRB 13/16"(20,6 mm) TY-FRB 1-1/16"(27,0 mm)
FIGURE 12 FIGURE 13
SERIES TY-FRB RECESSED PENDENT SERIES TY-FRB RECESSED PENDENT
WITH TWO-PIECE 3/4 INCH TOTAL ADJUSTMENT WITH TWO-PIECE 1/2 INCH TOTAL ADJUSTMENT
STYLE 40 RECESSED ESCUTCHEON STYLE 30 RECESSED ESCUTCHEON
8.0 K-FACTOR,3/4 IN.NPT 8.0 K-FACTOR,3/4 IN.NPT
WRENCH
G RECESS
WRENCH RECESS e���
(END"A"USED FOR
^ 1/2"NPT MODELS)
,i1111,...
�r9
WRENCH RECESS PUSH WRENCH
(END"B"USED FOR
3/4"NPT MODELS) IN TO ENSURE
ENGAGEMENT
WITH SPRINKLER
WRENCHING AREA
FIGURE 14 FIGURE 15
W-TYPE 6 SPRINKLER W-TYPE 7 RECESSED
WRENCH SPRINKLER WRENCH
•
•
TFP171
Page 7 of 12
Sprinkler Finish5
K-Factor Type Temperature Bulb Liquid
Color Natural Chrome Plated Polyesters
Brass
135°F(57°C) Orange
155°F(68°C) Red
Pendent 175°F(79°C) Yellow
(TY1231)
200°F(93°C) Green
286°F(141°C) Blue
1,2,3,4
135°F(57°C) Orange
155°F(68°C) Red
Upright(TY1131) 175°F(79°C) Yellow
2.8 200°F(93°C) Green
1/2 in.NPT 286°F(141°C) Blue
135°F(57°C) Orange
Recessed Pendent 155°F(68°C) Red
(TY1231)a 175°F(79°C) Yellow
Figure 6
200°F(93°C) Green
1,2,4
135°F(57°C) Orange
Recessed )Pendent (155°F 68°C Red
(TY1231)b 175°F(79°C) Yellow
Figure 7
200°F(93°C) Green
NOTES
a. Installed with Style 10(1/2 in.NPT)or Style 40(3/4 in.NPT)3/4 in.Total Adjustment Recessed Escutcheon,as applicable.
b. Installed with Style 20(1/2 in.NPT)or Style 30(3/4 in.NPT)1/2 in.Total Adjustment Recessed Escutcheon,as applicable.
c. Frame and Deflector only.
1. Listed by Underwriters Laboratories,Inc.,(UL)as Quick Response Sprinklers.
2. Listed by Underwriters Laboratories,Inc.,for use in Canada(C-UL)as Quick Response Sprinklers.
3. Approved by Factory Mutual Research Corporation(FM)as Quick Response Sprinklers.
4. Approved by the City of New York under MEA 354-01-E.
5. Where Polyester Coated Sprinklers are noted to be UL and C-UL Listed,the sprinklers are UL and C-UL Listed,the sprinklers are UL and C-UL Listed as corrosion-resistant
sprinklers.
TABLE A
LABORATORY LISTINGS AND APPROVALS FOR
2.8 K-FACTOR SPRINKLERS
i6
3
TFP171
Page 8 of 12
Sprinkler Finish3
K-Factor Type Temperature Bulb Liquid
Color Natural Chrome Plated Polyesters
Brass
135°F(57°C) Orange
155°F(68°C) Red
Pendent 175°F(79°C) Yellow
(TY2231)
200°F(93°C) Green
286°F(141°C) Blue
135°F(57°C) Orange
155°F(68°C) Red
Upright(TY2131) 175°F(79°C) Yellow
4.2 200°F(93°C) Green
1,2
1/2 in.NPT
286°F(141°C) Blue
135°F(57°C) Orange
Recessed Pendent 155°F(68°C) Red
(TY2231)a 175°F(79°C) Yellow
Figure 8
200°F(93°C) Green
135°F(57°C) Orange
Recessed )Pendent (155°F 68°C Red
(TY2231)b 175°F(79°C) Yellow
Figure 9
200°F(93°C) Green
NOTES
a. Installed with Style 10(1/2 in.NPT)or Style 40(3/4 in.NPT)3/4 in.Total Adjustment Recessed Escutcheon,as applicable.
b. Installed with Style 20(1/2 in.NPT)or Style 30(3/4 in.NPT)1/2 in.Total Adjustment Recessed Escutcheon,as applicable.
c. Frame and Deflector only.
1. Listed by Underwriters Laboratories,Inc.,(UL)as Quick Response Sprinklers.
2. Listed by Underwriters Laboratories,Inc.,for use in Canada(C-UL)as Quick Response Sprinklers.
3. Where Polyester Coated Sprinklers are noted to be UL and C-UL Listed,the sprinklers are UL and C-UL Listed,the sprinklers are UL and C-UL Listed as corrosion-resistant
sprinklers.
TABLE B
LABORATORY LISTINGS AND APPROVALS FOR
4.2 K-FACTOR SPRINKLERS
TFP171
Page 9 of 12
Sprinkler Finish8
K-Factor Type Temperature Bulb Liquid
Color Natural Chrome Polyesters Poly-Stainlessc Lead
Brass Plated Coated
135°F(57°C) Orange
155°F(68°C) Red
Pendent 175°F(79°C) Yellow 1,2,3,4,5,6,7 1,2 1,2,3,5
(TY3231)
200°F(93°C) Green
286°F(141°C) Blue
135°F(57°C) Orange
155°F(68°C) Red
Upright 175°F(79°C) Yellow 1,2,3,5,6 1,2 1,2.3,5
(TY3131)
200°F(93°C) Green
5.6 286°F(141°C) Blue
1/2 in.
NPT 135°F(57°C) Orange
Recessed 155°F(68°C) Red
Pendent 175°F(79°C) Yellow 1,2,4,5 1,2 N/Ad
(TY3231)a
Figure 10 200°F(93°C) Green
286°F(141°C) Blue
135°F(57°C) Orange
Recessed 155°F(68°C) Red
Pendent 175°F 79°C Yellow 1,2,3,4,5 N/A N/A
(TY3231)b ( )
Figure 11 200°F(93°C) Green
286°F(141°C) Blue
NOTES
a. Installed with Style 10(1/2 in.NPT)or Style 40(3/4 in.NPT)3/4 in.Total Adjustment Recessed Escutcheon,as applicable.
b. Installed with Style 20(1/2 in.NPT)or Style 30(3/4 In.NPT)1/2 in.Total Adjustment Recessed Escutcheon,as applicable.
i' c. Frame and Deflector only.
d. Not available(N/A).
1. Listed by Underwriters Laboratories,Inc.,(UL)as Quick Response Sprinklers.
2. Listed by Underwriters Laboratories,Inc.,for use in Canada(C-UL)as Quick Response Sprinklers.
3. Approved by Factory Mutual Research Corporation(FM)as Quick Response Sprinklers.
I) 4. Approved by the Loss Prevention Certification Board(LPCB Ref.No.007k/04)as Quick Response Sprinklers.However,LPCB does not rate the thermal sensitivity of recessed
sprinklers.
5. Approved by the City of New York under MEA 354-01-E.
6. VdS Approved(For details,contact Johnson Controls,Enschede,Netherlands,Tel.31-53-428-4444/Fax 31-53-428-3377.)
7. Approved by the Loss Prevention Certification Board(LPCB Ref.No.094a/06)as Quick Response Sprinklers.
8. Where Polyester Coated and Lead-Coated Sprinklers are noted to be UL and C-UL Listed,the sprinklers are UL and C-UL Listed as Corrosion-Resistant Sprinklers.Where
Lead-Coated Sprinklers are noted to be FM Approved,the sprinklers are FM Approved as a Corrosion-Resistant Sprinklers.
TABLE C
LABORATORY LISTINGS AND APPROVALS FOR
5.6 K-FACTOR SPRINKLERS
11
11
{
IJ
it
ij
TFP171
Page 10 of 12
Sprinkler Finish8
K-Factor Type Temperature Bulb Liquid
Color Natural Chrome Polyesters Poly-Stainless° Lead
Brass Plated Coated
135°F(57°C) Orange
155°F(68°C) Red
Pendent 175°F(79°C) Yellow
(TY4231)
200°F(93°C) Green
286°F(141°C) Blue 1,2,3,4,5,6,7 1,2 1,2.5
135°F(57°C) Orange
155°F(68°C) Red
Upright 175°F(79°C) Yellow
(TY4131)
200°F(93°C) Green
8.0 286°F(141°C) Blue
3/4 in.
NPT 135°F(57°C) Orange
Recessed 155°F(68°C) Red
Pendent 175°F(79°C) Yellow 1,2,5 1,2 N/Ad
(TY4231)a
Figure 12 200°F(93°C) Green
286°F(141°C) Blue
135°F(57°C) Orange
Recessed 155°F(68°C) Red
Pendent 175°F(79°C) Yellow 1,2,3,5 N/A N/A
(TY4231)b
Figure 13 200°F(93°C) Green
286°F(141°C) Blue
135°F(57°C) Orange
155°F(68°C) Red
Pendent 175°F(79°C) Yellow
(TY4931)
200°F(93°C) Green
8.0 286°F(141°C) Blue
1NPT 135°F(57°C) Orange 1,2,4,5,6 N/A 1,2,5
155°F(68°C) Red
Upright 175°F(79°C) Yellow
(TY4831)
200°F(93°C) Green
286°F(141°C) Blue
NOTES
a. Installed with Style 10(1/2 in.NPT)or Style 40(3/4 in.NPT)3/4 in.Total Adjustment Recessed Escutcheon,as applicable.
b. Installed with Style 20(1/2 In.NPT)or Style 30(3/4 in.NPT)1/2 in.Total Adjustment Recessed Escutcheon,as applicable.
c. Frame and Deflector only.
d. Not available(N/A).
1. Listed by Underwriters Laboratories,Inc.,(UL)as Quick Response Sprinklers.
2. Listed by Underwriters Laboratories,Inc.,for use in Canada(C-UL)as Quick Response Sprinklers.
3. Approved by Factory Mutual Research Corporation(FM)as Quick Response Sprinklers.
4. Approved by the Loss Prevention Certification Board(LPCB Ref.No.007k/04)as Quick Response Sprinklers.However,LPCB does not rate the thermal sensitivity of recessed
sprinklers.
5. Approved by the City of New York under MEA 354-01-E.
6. VdS Approved(For details,contact Johnson Controls,Enschede,Netherlands,Tel.31-53-428-4444/Fax 31-53-428-3377.)
7. Approved by the Loss Prevention Certification Board(LPCB Ref.No.094a/06)as Quick Response Sprinklers.
8. Where Polyester Coated and Lead-Coated Sprinklers are noted to be UL and C-UL Listed,the sprinklers are UL and C-UL Listed as Corrosion-Resistant Sprinklers.Where
Lead-Coated Sprinklers are noted to be FM Approved,the sprinklers are FM Approved as a Corrosion-Resistant Sprinklers.
TABLE D
LABORATORY LISTINGS AND APPROVALS FOR
5.6 AND 8.0 K-FACTOR SPRINKLERS
TFP171
Page 11 of 12
Sprinkler Finish
K-Factor Type Natural Chrome
Brass Plated Polyester Lead Coated
Pendent(TY1231)
and
2.8 Upright(TY1131)
1/2 in. 175 psi(12,1 bar) N/A2
NPT Recessed
Pendent(TY1231)
Pendent(TY2231)
and
4.2 Upright(TY2131)
1/2 in. 175 psi(12,1 bar) N/A
NPT Recessed
Pendent(TY2231)
Pendent(TY3231)
and
5.6 Upright(TY3131) 250 psi(17,2 bar)
t/2 in.
NPT or 175 si(12,1 bar)1
Recessed
Pendent(TY3231)
Pendent(TY4231)
and 175 psi
8.0 Upright(TY4131) (12,1 bar)
3/4 in. 175 psi(12,1 bar)
NPT Recessed
Pendent(TY4231) N/A
8.0 Pendent(TY4931) 175 psi
1/2 in. and 175 psi(12,1 bar) 12,1 bar
NPT Upright(TY4831) ( )
NOTES
1. The maximum working pressure of 250 psi(17,2 bar)only applies to the Listing by Underwriters Laboratories Inc.(UL);the Listing by Underwriters Laboratories,Inc.for use in
• Canada(C-UL);and,the Approval by the City of New York.
2. Not available(N/A).
TABLE E
MAXIMUM WORKING PRESSURE
Care and corrosive products of combustion, but tion Service in accordance with local
have not operated,should be replaced requirements and/or national codes.
Maintenance if they cannot be completely cleaned Care must be exercised to avoid
by wiping the sprinkler with a cloth or
by brushing it with a soft bristle brush. damage to the sprinklers before,
The TYCO Series TY-FRB 2.8,4.2,5.6, during, and after installation. Spnn-
and 8.0 K-factor Upright,Pendent,and Care must be taken to avoid damage klers damaged by dropping, striking,
Recessed Pendent Sprinklers must be to the sprinklers before, during, and wrench twist/slippage,or the like,must
maintained and serviced in accordance after installation. Sprinklers damaged be replaced.Also,replace any sprinkler
with this section. Before closing a fire by dropping, striking, wrench twist/ that has a cracked bulb or that has lost
protection system main control valve slippage,or the like,must be replaced. liquid from its bulb. For more informa-
for maintenance work on the fire pro- Also, replace any sprinkler that has tion,see Installation section.
tection system that it controls, obtain a cracked bulb or that has lost liquid Initial and frequent visual inspections of
permission to shut down the affected from its bulb.For more information,see random samples are recommended for
fire protection systems from the proper Installation section. corrosion resistant sprinklers to verify
authorities and notify all personnel who The owner is responsible for the the integrity of the corrosion-resis-
may be affected by this action. inspection,testing,and maintenance of tant material of construction. There-
Absence of the outer piece of an their fire protection system and devices after, annual inspections per NFPA 25
escutcheon, which is used to cover in compliance with this document, as should suffice. Inspections of corro-
a clearance hole, can delay sprinkler well as with the applicable standards sion-resistant sprinklers are recom-
operation in a fire situation. of the National Fire Protection Associ- mended at close range,instead of from
Sprinklers which are found to be ation such as NFPA 25, in addition to the floor level per NFPA. Inspection at
leaking or exhibiting visible signs of the standards of any other authorities close range can better determine the
corrosion must be replaced. having jurisdiction.Contact the install- exact sprinkler condition and the long-
ing contractor or sprinkler manufac- term integrity of the corrosion-resistant
Automatic sprinklers must never be turer regarding any questions. material,which can be affected by the
painted, plated, coated, or other- Automatic sprinkler systems are rec corrosive conditions present.
wise altered after leaving the factory. ommended to be inspected, tested,
Modified sprinklers must be replaced. and maintained by a qualified Inspec-
Sprinklers that have been exposed to
TFP171
Page 12 of 12
P/N 57 — XXX — X — XXX
SIN TEMPERATURE
SPRINKLER RATINGS
FINISH
330 2.8K UPRIGHT(1/2 in.NPT) TY1131 135 135°F(57°C)
1 NATURAL BRASS
331 2.8K PENDENT(1/2 in.NPT) TY1231 POLY-STAINLESS GREY 155 155°F(68°C)
2 ALUMINUM(RAL9007)1
340 4.2K UPRIGHT(1/2 in.NPT) TY2131 POLYESTER 175 175°F(79°C)
PURE WHITE
341 4.2K PENDENT(1/2 in.NPT) TY2231 3 POLYESTER(RAL9010)2 200 200°F(93°C)
SIGNAL WHITE
370 5.6K UPRIGHT(1/2 in.NPT) TY3131 4 POLYESTER(RAL9003) 286 286°F(141°C)
JET BLACK
371 5.6K PENDENT(1/2 in.NPT) TY3231 5 POLYESTER(RAL9005)3
390 8.0K UPRIGHT(3/4 in.NPT) TY4131 7 LEAD COATED
391 8.0K PENDENT(3/4 in.NPT) TY4231
9 CHROME PLATED
360 8.0K UPRIGHT(1/2 in.NPT) TY4831 NOTES
1. Available only on TY3131,TY3231,TY4131,and TY4231
2. Eastern Hemisphere sales only.
361 8.0K PENDENT(1/2 in.NPT) TY4931 3. Available in only 2.8K,4.2K,and 8.0K,155°F(68°C)and 200°F(93°C);requires longer
lead time to manufacture.
TABLE F
SERIES TY-FRB PENDENT AND UPRIGHT SPRINKLERS
PART NUMBER SELECTION
Limited Ordering
Warranty Procedure
For warranty terms and conditions,visit Contact your local distributor for
www.tyco-fire.com. availability. When placing an order,
indicate the full product name and Part
Number(P/N).
Sprinkler Assemblies with NPT
Thread Connections
Specify: Series TY-FRB(Specify SIN),
(specify K-factor), (specify Pendent or
Upright)Sprinkler(specify)temperature
rating, (specify) finish or coating, P/N
(specify from Table F)
Recessed Escutcheon
Specify: Style (10, 20, 30, or 40)
Recessed Escutcheon with (specify*)
finish,P/N(specify`)
Refer to Technical Data Sheet TFP770
Sprinkler Wrench
Specify: W-Type 6 Sprinkler Wrench,
P/N 56-000-6-387
Specify: W-Type 7 Sprinkler Wrench,
P/N 56-850-4-001
1400 Pennbrook Parkway,Lansdale,PA 194461 Telephone+1-215-362-0700 L �� '�
02020 Johnson Controls.All rights reserved.All specifications and other information shown were current as of document revision date and are subject to change without notice. Johnson /Arai,
NATIONAL FIRE PROTECTION ASSOCIATION and NFPA are registered trademarks of National Fire Protection Association: Controls
TEFLON is a registered trademark of DuPont