Loading...
Report (4) • si(- 11.) HOTO ....w SERIES Addressable Photoelectric Smoke Detectors 1PS7022t'05G The Silent Knight® SK-PHOTO-W Series feature a modern design and expanded color options support a variety of contemporary aesthetic demands. In addition, each detector is constructed for exceptional installation and maintenance efficiency. The SK-PHOTO-W Series intelligent plug-in smoke detectors are designed for both performance and aesthetics,and are direct replacements for the SK-PHOTO Series detectors.A new modern,sleek,contemporary design and enhanced optical sensing chamber is engineered to sense smoke produced by a wide range of combustion sources in RECEIVED accordance with more stringent code standards.The SK-PHOTO-W Series detector sensitivity can be programmed in the control panel software.Sensitivity is continuously monitored and reported to the panel.Point ID capability allows each detector's address to be 'APR,4 2022 set with rotary,decimal address switches,providing exact detector location for selective CITY OF TIGARU maintenance when chamber contamination reaches an unacceptable level.Dual electronic thermistors add 135°F(57°C)fixed temperature thermal sensing on the SK-PHOTO-T-W. BUILDING DIVISION The SK-PHOTO-R-W is a remote test capable detector for use with DN R Series duct detector housings. FEATURES AND BENEFITS • Designed to meet UL 1268 7th Edition steady red in Alarm • Sealed against back pressure • Sleek and stylish contemporary design • Integral communications and built-in • Plugs into separate base for ease of • Stable communication technique with device-type identification installation and maintenance noise immunity • Remote test feature from the panel • Expanded color options • • Addressable by device • Built-in functional test switch activated by • SEMS screws for wiring of the separate base • Rotary,decimal addressing(Refer to the external magnet • Optional remote,single-gang LED Silent Knight panel manuals for device • Walk test with address display(an address accessory capacity) of 121 will blink the detector LED 12- • Optional sounder,relay,and isolator bases • Two-wire SLC connection (pause)-1) • LEDs blink every time the unit is polled • Low standby current • 360°-field viewing angle of the visual alarm • Built-in tamper-resistant feature indicators(two bi-color LEDs);LEDs blink • Designed for direct-surface or electrical- Honeywell green in Normal condition and turn on box mounting rill SILENT KNIGHT INSTALLATION B200SR-LF-WH:White,Low Frequency Intelligent sounder base The SK-PHOTO-W Series plug-in intelligent thermal detectors use a for retrofit applications separate base to simplify installation,service,and maintenance. B200SR-LF-IV:Ivory,Low Frequency Intelligent sounder base for Installation instructions are shipped with each detector. retrofit applications Mount base(all base types)on an electrical backbox which is at B224RB-WH:White,plug-in System Sensor°relay base least 1.5"(3.81 cm)deep.For a chart of compatible junction boxes, B224RB-IV:Ivory,plug-in System Sensor relay base see SK-61045. B224BI-WH:White,plug-in System Sensor isolator detector base Note:Because of the inherent supervision provided by the SLC loop, end-of-tine resistors are not required.Wiring"T-taps"or branches B224BI-IV:Ivory,plug-in System Sensor isolator detector base are permitted for Style 4(Class"B")wiring. ACCESSORIES Note:When using relay or sounder bases,consult the SK-ISO TR300:White,replacement flange for B210LP or B300-6 bases installation sheet 156 3627 for device limitations between isolator TR300-IV:Ivory,replacement flange for B210LP or B300-6 bases modules and isolator bases. RA100Z(A):Remote 3-32 VDC LED annunciator,mounts to a U.S. OPERATION single-gang electrical box,for use with B501 and B300-6 bases Each SK-PHOTO-W Series detector uses one of the panel's addresses only (total limit is panel dependent)on the Signaling Line Circuit(SLC).It M02-04-00:Test magnet responds to regular polls from the control panel and reports its type and the status.If it receives a test command from the panel(or a local M02-09-00:Test magnet with telescoping handle magnet test),it stimulates its electronics and reports an alarm.It blinks CK300:White,detector color kit,pack of 10 its LEDs when polled and turns the LEDs on when commanded by the CK300-IV:Ivory,detector color kit,pack of 10 panel.The SK-PHOTO-W Series offers features and performance that CK300-BL:Black,detector color kit,pack of 10 represent the latest in smoke detector technology. PRODUCT LINE INFORMATION • Note:"-IV"suffix indicates ivory color. SK-PHOTO-W:White,low-profile photoelectric sensor . SK-PHOTO-T-W:White,same as SK-PHOTO-W but includes a built-in 135°F(57°C)fixed-temperature thermal device SK-PHOTO-R-W:White,low-profile intelligent photoelectric sensor, remote test capable,for use with DNR/DNRW B300-6:White,standard flanged tow-profile mounting base B300-6-BP:Bulk pack of B300-6,package contains 10 B300-6-IV:Ivory,standard flanged low-profile mounting base B501-WHITE:White,standard European flangeless mounting base B501-BL:Black,standard European flangeless mounting base B501-IV:Ivory,standard European flangeless mounting base B501-WHITE-BP:Bulk pack of B501-WHITE,contains 10 B200S-WH:White,Intelligent,programmable sounder base B200S-IV:Ivory,Intelligent,programmable sounder base B200SR-WH:White,Intelligent sounder base for retrofit applications B200SR-IV:Ivory,Intelligent sounder base for retrofit applications B200S-LF-WH:White,Low Frequency Intelligent,programmable sounder base B200S-LF-IV:Ivory,Low Frequency Intelligent,programmable sounder base Page 2 of 3—351634:B•7/1/2019 SK-PHOTO-W SERIES TECHNICAL SPECIFICATIONS PHYSICAL/ENVIRONMENTAL DETECTOR SPACING AND • Sensitivity: APPLICATIONS Silent Knight'and System Sensor'' 0 o Silent Knight recommends spacing are registered trademarks of - UL Applications:0.5/o to 4.0/o per foot Honeywell International,Inc. obscuration. detectors in compliance with NFPA 72.In - ULC Applications:0.5%to 3.5%per foot low airflow applications with smooth ceiling, This document is not intended to be obscuration space detectors 30 feet(9.1m).For specific used for installation purposes.We information regarding detector spacing, try to keep our product information Size:2.0"(5.3 cm)high;base determines placement,and special applications refer to diameter up-to-date and accurate.We cannot NFPA 72.A System Smoke Detector cover all specific applications or - B300-6:6.1"(15.6 cm)diameter Application Guide,document A05-1003,is anticipate all requirements.Alt - B501:4"(10.2 cm)diameter available at www.systemsensor.com. specifications are subject to change For a complete list of detector bases,see AGENCY LISTINGS AND without notice. SK-61045. APPROVALS Country of origin:Mexico Shipping weight:3.4 oz.(95 g) These listings and approvals apply to the Operating temperature range: modules specified in this document.In some • SK-PHOTO-W:32°Fto 122°F(0°C to 50°C) cases,certain modules or applications may • SK-PHOTO-T-W:32°F to 100°F(0°C to not be listed by certain approvalagencies,or 38°C) listing may be in process.Consult factory for • SK-PHOTO-R-W installed in a DNR/DNRW: latest listing status. -4°F to 158°F(-20°C to 70°C) • UL Listed:S6173 UL/ULC Listed Velocity Range:0-4000 ft/ • FM Approved min.(1219.2 m/min.),suitable for • CSFM:7272-0559:0512 installation in ducts Relative humidity:10%—93%non- condensing • Thermal ratings:fixed-temperature set point 135°F(57°C),rate-of-rise detection 15°F(8.3°C)per minute,high temperature heat 190°F(88°C) ELECTRICAL SPECIFICATIONS Voltage range:15-32 volts DC peak Standby current(max.avg.):200pA @ 24 VDC(one communication every 5 seconds with LED enabled) Max current:4.5 mA @ 24 VDC("ON") • Honeywell Silent Knight 12 Clintonville Road Northford,CT 06472-1610 Honeywell 203.484.7161 351634 I B 107/19 171 SILENT' www.silentknight.com ©2019 Honeywell International Inc. OWy KNIGHT b � 5 j Ni ,r ' E g :y{cry=€" ::,. , �''2 c,: k ' .a . Honeywell . . ,,,,, ,... _$, ,, rff SILENT'. :440 <. 00414„ s-. " Wit* d, `,at- wF �... F "4��i��? �iw��did' d ,: A t :'.r .: :.. s_.Ri3 ' 'ilh! �adr�"'«�'urirr �a' .f•v ;,S� 4. `t ` t t.. =rWi V 'iLO1'7 i,.pd .ii ttr ism�, :111140.4401;;V Ate, � ���` ,:,. fit.. t � tia�r:xs:��rrNt,�> 'aaas:r,fr>r':. ���'s K PULL-SA / SK " .4,4.04. , � � �r�iy.�a,,,y a ..... .c� �����r;'t�^,gib"u� ':;ibis{,lH$1'�i7�lfn�iii�hd,�i,, pp F' Intelligent Pull Stations ' �, �j • . $n 'i�.� ,'41d i N' {,. ' ..,r,, -,a{"',r €,� ,;;x;:ii' ' . 9 -:-.i '• � . ie :.�.� iP,,:7'.,'e iN:':. ,�i•k�''�%i'I��:etln�fi>�` a'2?1�1'E'P��� '_$,���^.:A.�aii�s.}'34`b�_�*�fii'NaS�iE F,';3�ts.^ ;,i�=% t�.�t.ut.�:1� r.�'rh"fix':-,Er,.,,,!�,f`,r�:s:!r:�':;µti!,�,i,G'',��';:e.Myr,t�a:ar,,:,era::'�=_��i�v"K;!»:��` "rxhe5:; ... ...... ...... _ .., :.. ,' fir; The SK PULL SA is a single action pull stati r:" '',.., e,m i •, ri ";3, ,4i�4_'4 °_i"� "•' :, � ,:. <�:> �; activate the station.The SK-PULL-DA is a d ''?bj � t?)� ,: �'ty� �' iItialtiti'� S v 6>{ .. jx'l8'{e.•4:.a~.,saaii*Ei if,I �Qk "�3 lt, <� 't : ,.. a , w two mot•ions to active the station.The SK-P '4 z .a,• ti n . ' ' • r°: use with Honeywell Silent Knight Series fire .x . :. , ' :r:; .: . ; :., PULL DOWN Extremely easy to operate,the SK PULL D '` .e. y1 .. w ifif and practical means of manually initiatingr` r t ° n`» A ' . k` IT';„:511fild . 'ii.. � � recognizes each manual pull station by its `` :' • " ;tWiLiMitAti4LIILLO -Tog me,to.04 `; :` , seconds in determining the location of an a � .., `; : �a t , .,: '! I.:,..-.::'::'a V Honeywell . ,� b t"v' t(�'� tf '144';'''''"''144641HIVRI*InnittoiLa—rnk'I')%44.440 .04*,-..r.—.,,„,,- ;, ,s,;,,,,,,.;,..4.,t4:0,1„rlyi,:k410,4*Nlort INSTALLATIONsok, I;. The SK PULL SA and SK PULL DA can be s °' surface back box or semi flush mounted o . =v �'. w4Mr':g, °:A1..:" #- ' <z Ingiswo minimum depth of 2.13"(5.40 cm)or doubt' 'A' !. '� ' . ..� :, i r°�,v,.1 , m " ii,;dr'+",yR:•ss'>� u r x ., i' . , oi:``V i, electrical box.You can also use the optiona » " b # '; ,. trim ring if the station is being semi flush n =;ti:` :;t „.. �}°4�l :. " .......�(". �:. fv��w�h:::a.. ,. 9" ,.... .Su %�;.:. :,`d'�s°.,xx�'. .•. �aa..,,, .0 PUSH IN PULL DOWN Honeywell I. ©kV..!, i SK-PULL-DA FEATURES & BENEFITS • Installer can open • Key operated test and + Meets • Reliable analog • Handle latches in station without reset lock using lock with DisabilitiestheAmericans Act communications for down position and the causing an alarm plate actuator Accessibility trouble free operation ward Activated condition Guidelines(ADAAG) appears,clearly • Key matches Braille text on station • Dual-color LED is compatible FRCP controls and operating handle indicating the station i mechanisms has been pulled visible through handle Locks Rotaryaddress of station blinks green guidelines(Section • UL I...isted,including • Meets ADA 4.1.3[131) switches for fast to indicate normal UL 38,Standard of requirement for 5 lbs installation operation and remains • Shell,door,and handle Manually Actuated maximum pull force to molded from durable steady red in an alarm active SigCSFnMalingListed System condition LEXAN° • • MEA Listed SK-PULL-SA / SK-PULL-DA Technical Specifications For a complete listing of all compliance approvals and certifications,please visit PHYSICAL ORDERING INFORMATION www.sitentknight.com. • Dimensions:5.5"H x 4"W x 1.45"D(14 x 10.2 x SK-Pull-SA:Single Action Pull Station 3.7cm) SK-Pull-DA:Dual Action Pull Station Microsoft,Windows,and the Windows Logo are Housing Material:LEXAN polycarbonate resin registered trademarks Bi-Colored LED: ACCESSORIES or trademarks of Blinking Green:Normal BG-TR:Optional trim ring. Microsoft Corporation. Steady Red:Alarm SB-I/O:Surface backbox,indoor/outdoor. Silent Knight",System Switch:Single pole,single throw(SPST)normally *Unless otherwise noted,specifications apply to Sensor'and Honeywell open(N/O)switch which closes upon activation of SK-PulI--SA and SK-Pull-DA are registered the pull station trademarks of Honeywell COMPATIBILITY International,Inc. ELECTRICAL The SK-PULL-SA AND SK-PULL-DA are This document is not Operating Voltage:15-32VDC compatible with the following Honeywell Silent intended to be used for SLC Standby and Alarm Current:3501.tA Knight fire alarm control panels: installation purposes.We 6820:Addressable fire alarm control panel try to keep our product Wire Gauge:Up to 12AWG(3.1 mm2) information up-to 6820EVS:Addressable fire alarm control panel date and accurate.We ENVIRONMENTAL with an emergency voice system. cannot cover all specific Operating Temperature:3213F-120a(0Rc- 6808:Addressable fire alarm control panel applications or anticipate 49B12) 6700:Addressable fire alarm control panel all requirements.All specifications are subject Humidity:10%-93%non-condensing 5700:Addressable fire alarm control panel to change without notice. 5808:Addressable fire alarm control panel For Technical Support, 5820XL:Addressable fire alarm control panel call800-446-6444. 5820XL-EVS:Addressable fire alarm control panel with an emergency voice system For more information Learn more about Honeywell Silent Knight and other products by visiting www.sitentknight.com Honeywell Silent Knight 12 Clintonville Road ■u Boneel' Northford,CT 06472 Doc 350135I Rev E 111/17 raSILENT' 800-328.-0103 ©2017 Honeywell International Inc. Ilia KNIGHT