Report (28) .•
14.8.4.1.6141114.6140.14.16.1.1.121.1.......rn
,n•••en ...re.• ••••••Oregon Residential Specialty Code N1107.2
HIGH-EFFICIENCY INTERIOR LIGHTING SYSTEMS
Permit No.: - ocAL.4., Jurisdiction-
I k(serc.A
Site Address:
Subdivision/Lot#:
Ca.0
and/or
Map and Tax Lot#:
By my signature below, I certify that a minimum of fifty(50)percent of the permanently
installed lighting fixtures in the above mentioned building have been installed with compact or
linear fluorescent, or a lighting source that has a minimum efficacy of 40 lumens per input watt.
(Oregon Residential Specialty Code N1107.2)I
Signature: Date: Si7a67/AD
tractor/Authorizd Agent
Print Name: s_
I ORSC Section N1107.2.High-efficiency interior lighting systems. A minimum of fifty(50)percent o the
permanently installed lighting fixtures shall be installed with compact or linear fluorescent,or a lighting source that
has a minimum efficacy of 40 lumens per input watt. Screw-in compact fluorescent lamps comply with this
requirement.
The building official shall be notified in writing at the final inspection that a minimum of fifty percent of the
permanently installed lighting fixtures are compact or linear fluorescent,or a minimum efficacy of 40 lumens per
input watt.
1\BuikiingTomulRES-HighEfficiencyLighting.doc 07/01/08
Oregon Residential Specialty Code R318.2
MOISTURE CONTENT ACKNOWLEDGEMENT FORM
I, , am the general contractor or the owner-builder
at the following address:
Site Address:
11-14-a-1 1LocVt&
City
Permit#:
NA ST -
Subdivision/Lot#:
and/or
Map and Tax Lot#:
To conform with the 2008 Oregon Residential Specialty Code(ORSC), Section R318.2 and
OAR 918-480-0140, I am notifying the building official that I am aware of the moisture content
Requirement of ORSC Section R318.2 and have taken steps to meet this code requirement.
[Section R318.2 is provided for reference].
R318.2 Moisture Content: Prior to the installation of interior finishes, the building
official shall be notified in writing by the general contractor that all moisture-sensitive
wood framing members used in construction have a moisture content of not more than 19
percent by dry weight of dry framing members.
Signatuit:
Date: S'Ae_0/ 3
oto or Owner-Builder
I:\Buildinifform\RES-MoisturrSensitiveWood.doc 09/25/08
Oregon Residential Specialty Code R408.1
MOISTURE BARRIER ACKNOWLEDGEMENT FORM
1 s , am the general contractor or the owner-builder
at the following address:
Site Address:
cl
City:
Permit#:
C)C7V-1
Subdivision/Lot#:
and/or
Map and Tax Lot#:
To conform with the 2014 Oregon Residential Specialty Code(ORSC), Section R408.1
Ventilation. lam notifying the building official that I have installed the Moisture Barrier as per
Requirement in ORSC Section 408.1 and have taken the following steps to meet this code
requirement:
Rile ground surface of the under-floor space is covered with 6-mil black polyethylene
sheeting with
Riints lapped 12"at seams and
r-q- ending up the foundation walls 12".
Si
gnatlirL Date:
or Owner-Builder
I:B
uilding ForraTES-MoistureBarrier.doc 09/13/2016
Moffet Energy Modeling
CCB#223372
Phone: 916-342-0742
tylermoffet@moffetenergymodeling.com
Blower Door Test Affidavit
Permit#: Builder: Taylor Morrison
Site Address: Roshak Lot 60: 14221 SW 169th Ave,Tigard,OR 97224
Conditioned Floor Area (sq. ft.): 1554
Source: Calculated from plans Calculated Building Volume (cubic feet): 14970
TEST RESULTS: 983 CFM @ 50 Pa
ACH @ 50 Pa = {(CFM x 60) :Volume}: 3.94
Ring: Open oA B
Minneapolis Blower Door and DG 700 Manometer
I certify that these building leakage rates are accurate and determined using standard BPI testing
protocol.
Company Name: Moffet Energy Modeling Technician:Tyler Moffet
Technician Signature: 1 iiii+'' Date: 5/21/2020