Report (3) 'grit-Uo'dzc
�id, seuf ET , F1 \Tcn i rv.
• ModeIJL112&J112-Pendent DO
III ® EC:LH-Mended Coverage L ¢ard ` `"` 3.
rieliableECOH--Exencied CeOriielQ� D-'
ECOHE 1ded��(,DIVII('
Hamad-(Quick Response 7
Model JL112 & J112 ECLH/ECOH SIN RA7216 is Corrosion Resistant with White
Pendent & Recessed Pendent Polyester Coating. _
(SIN R7216- Link and RA7216- Bulb) I a _„' I
• Quick Response for Light Hazard 1 :
(16'x 16'(4.9m x 4.9m),18'x 18'(5.5m x 5.5m)and �`" _
20'x 20'(6.1m x 6.1m)spacing) -
' .n
• Quick Response for Ordinary Hazard ^'
rn,
(12'x12'(3.7mx3.7m)and 14'x14°(4.3mx4.3m) ,
spacing) " ,f
• Standard Response for Ordinary Hazard
(16'x 16'(4.9m x 4.9m),18'x 18'(5.5m x 5.5m)and � �
20'x 20'(6.1m x 6.1m)spacing) �' :4
Features , .:•. Y „7.. "'r. , ,
1. Extended Coverage Ordinary Hazard and Light Hazard
protection to 400 ft2(37,2 m2)per sprinkler. Model JL112 Pendent Model J112 Pendent
2. Nominal K= 11.2(160). (R7216)- Link (RA7216)- Bulb
3. Available in Pendent or Recessed Pendent styles.
4. Recessed pendent version provides W'(19mm)adjust- This ECLH/ECOH sprinkler is available in various finishes,
ment to flush pendent position(see adjustment table). which includes a white polyester corrosion resistant finish.
5. Available in brass, chrome and polyester coated ECLH/ECOH sprinklers are available in a pendent or an
finishes. attractive recessed pendent type which provides up to "%n" I
6. For applications as per NFPA 13. (19mm)of escutcheon adjustment.
Approvals Organizations Design Criteria
1. Underwriters Laboratories, Inc.(UL) Reliable Model JL112 & J112 ECLH/ECOH sprinklers
2. Underwriters Laboratories of Canada(cULus) shall only be used in systems designed and installed in
UL Listing Category accordance with NFPA 13 and all other local codes and
Sprinklers,Automatic and Open Extended Coverage Sprin- ordinances.The following design criteria also apply: t
kiers-Ordinary Hazard Occupancy UL Guide Number-VNIV. • Minimum sprinkler spacing is 8 ft(2.44m). I
The Reliable Model JL112 and J112 sprinkler are Extended • Sprinklers have a minimum flow requirement for each
Coverage Sprinklers for use in both Light and Ordinary Hazard spacing as shown in the Flow Requirements Table on
1 and 2 occupancies with a coverage area of up to 400 square the reverse side.
feet(37.2m2)per sprinkler. For ordinary hazard applications it •
Sprinklers are only to be used in systems hydraulically
is a Standard Response Sprinkler, designed per NFPA 13.
For all light hazard applications it is a Quick Response sprin- Deflector to commodity clearance shall be a minimum
kler. For ordinary hazard applications, it is a Standard Re of 1fl inches(457mm).
sponse sprinkler when the spacing is 16'x 16'(4.9m x 4.9m)
• ECOH sprinklers shall be installed in unobstructed
and larger.When the spacing is 12'x 12'(3.7m x 3.7m)or 14'x constructions as defined in NFPA 13. For open web
14'(4.3m x 4.3m),the sprinkler is Quick Response for ordinary truss construction web thickness is not to exceed 1
hazard applications. inch(25.4mm).
The use of ECLH/ECOH sprinklers can provide lower instal- •
ECOH sprinklers which are installed above the bottom
lation costs by requiring fewer sprinklers, less piping and re-
located a horizontal obstruction, shall have their deflectors
duced labor. located as shown in the Obstruction Table on page 3.
ECLH/ECOH sprinklers are to be installed according to the • Sprinklers can be installed under a sloping ceiling
design criteria shown in this bulletin.NFPA 13.and all other lo- not exceeding 2 inches (50.8mm)of rise in 12 inches
cal codes and ordinances. Flows and pressures as shown on (304.5mm).
pages 2 and 3 of this bulletin,must be used for the appropriate • Maximum working pressure is 175 psi(12.1 bar)at the
spacing and for the designated hazard classifications. sprinkler.
• The Reliable Automatic Sprinkler Co., Inc., 103 Fairview Park Drive, Elmsford, New York 10523
Sprinkler Model Specifications
Temperature Max. Maximum Maximum
RatingCeiling Sprinkler Coverage THD
Sprinkler Model Type Temp. Spacing Area Size Approvals
*F 'C °F `C ft(m) ft2(m2)
JL112 ECLH/ECOH-R7216 Link/Pendent 165 74 100 38
20(6.1) 400(37.2)
JL112 ECLH/ECOH-R7216 Link/Recessed 212 100 150 66 a^Npt
(19mm) 1.2
J 112 ECLHIECOH-RA7216 Bulb/Pendent 155 68 100 38
20(6.1) 400(37.2)
J112 ECLH/ECOH-RA7216 Bulb/Recessed 200 93 150 66
Flow Requirements-Light Hazard-Quick Response
Spacing Coverage Area Flow Pressure "K"Factor
ft(m) ft2(m2) gpm(ipm) psi(bar) US Metric
16 x 16(4.9 x 4.9) 256(23.8) 30(113.6) 7.2(0.5)
18 x 18(5.5 x 5.5) 324(30.1) 33(124.9) 8.7(0.6) 11.2 160.0
20x20(6.1 x6.1) 400(37.2) 40(151.4) 12.8(0.9)
I
Flow Requirements-Ordinary Hazard-Standard Response
Ordinary Hazard 1 Ordinary Hazard 2
Coverage 0.15 gpm/ft2(6.1 Umin/m2) 0.20 gpm/ft2 (8.1 Umin/m2) "K"Factor
Spacing Area Density Density
ft(m) ft (m2)
Flow Pressure Flow Pressure
gpm(Lpm) psi(bar) gpm(ipm) psi(bar) US Metric
16 x 16(4.9 x 4.9) 256(23.8) 39(147.6) 12.1(0.8) 51(193.0) 20.7(1.4)
18 x 18(5.5 x 5.5) 324(30.1) 49(185.5) 19.1(1.3) 65(246.0) 33.7(2.3) 11.2 160.0
. 20 x 20(6.1 x 6.1) 400(37.2) 60(227.1) 28.7(2.0) 80(302.8) 51.0(3.5)
Flow Requirements-Ordinary Hazard-Quick Response
Ordinary Hazard 1 Ordinary Hazard 2
Spacing Coverage 0.15 gpm/ft2(6.1 Umin/m2) 0.20 gpm/ft2 (8.1 Umlnfm2) "K"Factor
ft(m) Area Density Density
ft2(m2) Flow Pressure Flow Pressure
gpm(Lpm) psi(bar) gpm(Lpm) psi(bar) US Metric
14 x 14(4.3 x 4.3) 196(18.2)
30(113.6) 7.2(0.5) 39(147.6) 12.1(0.8) 11.2 160.0
12 x 12(3.7 x 37) 144(13,4)
- 2.
Recess Escutcheons Recessed Pendent ECLH/ECOH Adjustments"'
ECLH ECOH
Escutcheon
F1/F2 FP R7216 RA7216 R7216 RA7216
1 FP -14(19.0) Y<(19.0) 14(19.0) l =(190)
.... F1 ' ' =. `)4(190) ';)(19.0)
)1:- ' - /�++"+..„- E2 I ''4)(12.7) I,(12.7) I,(12.7) h(12.7)
- .;,'. -"TA!:!, t''Adjustments in inches(mm).
'- ,,, - P Not listed by UL or cULus.
Finishes
„ '- Sprinkler Finishes
- Sprinkler Escutcheon
Model J1 Bronze Brass
Sprinkler Wrench Model RJ Chrome Chrome
Use Model Jt Wrench for Sprinkler Wrench White Polyester Coated V/hite Painted
iI-112&J112 ECLH/ECOH Use Model RJ Wrench for JL 112
?er,dent Sprinkler Removal &J112 ECLH/ECOH Recessed
Sprinkler Removal and Installation
and Installation
Ordering information
J1 Wrench RJ Wrench 1. Sprinkler Model
2. Temperature Rating
( 3. Finish
� = 3 .::� 4. Escutcheon and finish(where applicable)
' Corrosion Resistant
+r, Bulb
aF °C
J112 ECLH/ECOH
_
��. 155 68
200 93
Minimum Flow Requirements For Earlier Editions of NFPA 13-FOR REFERENCE ONLY
I 1 NFPA13-1991 Requirements t NFPA13-1989 Requirements "K"Factor
Ordinary Hazard 1 Ordinary Hazard 2 Ordinary Hazard 1 Ordinary Hazard 2 Ordinary Hazard 3
1 0.15 gpmltt2 0.20 gpm/tt2 0.16 gpete 0.19 gpm/tt2 0.21 gpm(ft2
Spacing
Coverage (6.1 Umin/m2) (8.1 Uminhn2) (6.5 Uminhnl (7.7 Umin/m2) (8.6 UminJm2)
ft(m) Area Density Density Density Density Density
ft2 OW) US Metric
Flow Pressure Flow Pressure Flow Pressure Flow Pressure Flow
Psure
gpm psi psi gpm psi gpm psi 9pm pssi(bar)
(Lpm) (bar) (bar) (Lpm) (bar) (Lpm) (bar) (Lpm)
14x14 30.2 7.0 39.2 11,9 31.4 7.6 37,3 10.7 41.2 13.0
(4.3x4.3) 196(18.2) (114.3) (0.48) (148.3) (0.82) (118.8) (0.52) (141.2) (0.74) (155.9) (0.90)
and less
16 x. 16 256(23.8) 38.4 11.4 51.2 20.2 41 0 12.9 48.7 18.2 53.8 22.3
(4.9 x 4.9) (145.3) (0.79) (193.8) (1.39) (155.2) (0.89) (184.3) (1.26) (203.6) (1.54) 11.4 164.4
18 x 18 1324(30.1) 48.6 18.2 64.8 32.3 51.9 20.7 61.6 29.2 68.0 35.7
(5.5x5.5) (184.0) (1.24) (258.9) (2.23) (196.4) (1.43) (233.2) (2.01) (257.4) (2.46)
20 x 20 .00(37 2. 60 0 27.7 80.0 49.3 64.0 31.5 76.0 44.5 84.0 54.3
(6.1 x6.1) ) (227.1) (1.91) (302.8) (3.40) (242.2) (2.17) (287.7) (3.07) (317.9) (3.75) i 1
3.
installation Requirements for Under Concrete Tees- cULus
• The stems of the concrete tee construction must be spaced at less than 7.5 feet(2.3m) on center but more than
3 feet (0.9m) on center. The depth of the concrete tees must not exceed 30 inches (762mm). The maximum
permitted concrete tee length is 32 feet (9.8m); however. where the concrete tee length exceeds 32 feet (9.8m),
• non-combustible baffles, equal in height to the depth of the tees, can be installed so that the longitudinal space
between the tees does not exceed 32 feet(9.8m) in length.
• The sprinkler deflectors are to be located in a horizontal plane at or above 1 inch(25.4mm)below the bottom of the
concrete tee stems.
• When the sprinkler deflectors are located higher than a horizontal plane 1 inch(25.4mm)beneath the bottom of the
concrete tee stems, the obstruction to sprinkler discharge criteria requirements of NFPA13 for extended coverage
upright sprinkler applies.
Location of Deflector to Horizontal Obstruction
Distance from Sprinkler
Maximum Allowable Distance I
Deflector Above Bottom of
to Side of Obstruction Obstruction ; tiii11111IILLOI
.
Less than iitr"t1' 0" t
S F.
(Less than 0.305m 0mm)
1'to less than 1'-6-
(0.305m to less than 0.305m- 152.4mm 0rnrn)
1'-6-to less than 2' 1' `
(0.305m- 152.4mm to less than 0.61m 25.4mm)
2.to less than 2 6- ,1' i s�3 r am I 1
(0.61m to less than 061m-152.4mm 25.4mm)
2'-6"to less than 3' 1. •
(0.61m- 152.4mm to less than 0.915m 25.4mm) j
3 to less than 3. 6"" 3,. i---------- '. -__ ----.__.-----i
(0.915m to less than 0.915m- 152Amm....... 76.2mm)
3'-8"to less than 4' 4' C{�-.)
(0.915m-152.4mm to lass than 1.22m 101,6mm)
4'tolessthan4'-6" 5"
(1.22m to less than 1.22m-152.4mm 127mm)
4'-6'to less than 5' 7" Fig.1 -Fl Escutcheon
(1.22m-152.4mm to less than 1.525m 177.8mm)
5'to less than 5'-6" 7"
(1.525m to less than 1.525m-152.4mm 177.8mm)
5'-6"to less than 6 7"
(1.525m- 152.4mm to less than 1.83m 177.8mm)
6'to Tess than 6'-6" 9"
(1.83m to less than 1.83m-152.4mm 228.6mm)
6'-6"to less than T 11'
(i.83rn-152.4mm to less than 2.135m 279.4mm)
T and Greater 14"
(2.135in and greater 355.6mm)
Solder Link Bulb
Classification °F °C Classification °F °C Bulb Color
Ordinary 165 74 Ordinary 155 68 Red
Intermediate 212 100 Intermediate 200 93 Green
The equipment presented in this bulletin is to be installed in accordance with the latest published Standards of the National Fire Protection Assrviation.Factory
Mutual Research Corporation.or other similar organizations and also with the provisions of governmental codes or ordinances whenever applicable.
Productsmanufactured and distributed by Reliable have been protecting life and property for over 90 years,and are installed and serviced by the most highly
qualified and reputable sprinkler contractors located throughout the United States,Canada and foreign countries.
Manufactured by
111111.11111111.11.11111111.1111.111.111.111. The Reliable Automatic Sprinkler Co..Inc.
Rename, (800)431-1588 Sales Offices v�j� Paper
(800)84&6051 Sales Fax Revision lines indicate updated sr new data.
(914)829-2042 Corporate Offices
www.reliablesprinkler.com Internet Address EG Printed in i s A 03,/ra PN 999s7031n
Y
r Bullet(n"013 Rev. E
co
0 Model F156 Series
Rehab' 1Standard
co
Standard Spray
rn
1 Model F156 Sprinkler Types —!
Standard Upright
Standard Pendent
Conventional I w
Vertical Sidewall
Horizontal Sidewall " '.t
Model F156 Recessed Sprinkler Types
Pendent/F1/F2/FP Upright Pendent
Horizontal Sidewall
Approval Organizations "4
1. Underwriters Laboratories Inc. and certified for • t d
Canada(cULus) a:')
2. Factory Mutual Approvals(FM)
3. Loss Prevention Council (LPCB, UK) ` _.
4. VdS Schadenverhutung GmbH
Vertical Sidewall Conventional
UL Listing Category
Sprinklers,Automatic&Open(VNIV) 3
Product Description
' The F156 Series Glass Bulb Sprinkler combines the t ti,;g
durability of a standard sprinkler with the attractive low = ,
profile of a decorative sprinkler. Whether installed on ex-
posed piping or in an office ceiling, it is functional and
attractive. Horizontal Sidewall Recessed
Beautifully versatile is the description for the Reliable Pendent/F1/F2
Model F156 Series Recessed glass bulb sprinkler. Re-
cessing the F156 Series enhances its already low profile -
decorative appearance, and facilitates a rapid and per-
fect installation. . r n
Model F156 Series Recessed escutcheon is highly ad- f ,, ' a, „,;
justable. The two piece construction makes field installa-
tion a very easy and rapid task. This also allows ceiling ' '' I
panels to later be removed without shutting down the fire * 1
protection system, thus facilitating maintenance of above Recessed
ceiling services, Recessed
The F156 Series Automatic Sprinkler utilizes a 5.0 mm Horizontal Sidewall Pendent FP
1
frangible glass bulb. The glass bulb consists of an ac-
curately controlled amount of special fluid hermetically and smaller as the liquid pressure increases. Continued
sealed inside of a precisely manufactured glass capsule. heating forces the liquid to push out against the bulb,
This glass bulb is specially constructed to provide fast causing the glass to shatter, opening the waterway and
thermal response. allowing the deflector to distribute the discharging wa-
At normal temperatures, the glass bulb contains the ter.
fluid in both the liquid phase and in the vapor phase. The The F156 Series Sprinkler temperature rating is identi- f
. vapor phase can be seen as a small bubble. As heat is fied by the color of the glass bulb capsule as well as
applied, the liquid expands forcing the bubble smaller frame color where applicable
The Reliable Automatic Sprinkler Co., Inc., 103 Fairview Park Drive, Elmsford, New York 10523
1 Model F156 Upright, Pendent & Conventional Sprinklers
Installation Wrench: Model D Sprinkler Wrench
F
Vitt,
�t 7A k
gi
Upright Pendent Conventional
Installation Data:
Nominal Thread Nominal K Factor Sprinkler Approval Sprinkler Identification Number
(SIN)
Orifice Size — Height Organization '
US Metric ---
Upright Pendent
Standard-Upright(SSU)and pendent Deflectors Marked to Indicate Position
;5" 5mm f' /2'NPT(RYI) 5.6 . 80 2 25 (57mm) 1 2 3,4" i RA1325-` RA1314
f l ,
Conventional-install in Upright or Pendent Position
15mm'' ' "NPT(R'/4 5.6 80 57mm 3,4 RA1375
Refer to Bulletin 02,1 for Special Response Sprinklers(F1S5-56)
cULus corrosion resistant(Polyester coated)sprinkler.
Polyester coated FM Approved sprinkler.
Model F156 Recessed Pendent Sprinkler(')
Installation Wrench: Model GFR2 Sprinkler Wrench
Installation Data:
Nominal Thread K Factor Sprinkler ( Sprinkler Identification Number
Orifice Size US + Metric Height , (SIN)
• %z"(15mmi 1/2"NPT(Ru2) ', 5.6 80 225"(57mm) RA1314
Refer to escutcheon data table for approvals&dimensions
2 1/4"ME Olt ,..4-- 2.5/8"DM. (55.7mmJ—a
152,7,..1 HOLE IN CEILING
1 IS/lE"ON - 2 5/18"064 (58.Tmm]-�{1
'�- [19.2mm] -.A. CUP I l
i- _- Y a
1 TURN COLLAR Y 1"X 1/1'REDUCER _,
I I'X %/2"F£DUtL9
UNTIL DONT
AGARST SAWKLER t `
WENCH RO55---\\ \ / r I I
1 �1� 1 v\ I �' l I
"C/1LLL/J 1��2\_I�—'' FACE OF FIRING FON --` J I 4
ADIUS73/00 IJ CIF,jIIP4JJ
E i1 1V���/, MUM t sON MIND ! !%:1 1 FACE a`;1n,eK,
TO FACE Dr CJL1NC
1 "A. T tip Vik_'IN _ W
2 2( 014 O/SR:01 ADJusrvEwr----1to 1 � ,tl A•.
....IS. i oLr?r.
F (1)REFER ID FI s FS ESSARFJE@l DAtt WILE MR AIS S AND DIMENSIONS.
(I)REIEP TC FP ESCUTCHEON DATA TABLE FOR APPROVALS AND DIMENS,ONS
Model F156/F1 or F2 Model F156/FP
2.
4
I Model F156 Vertical Sidewall Sprinkler ¢x,
Installation Wrench: Model D Sprinkler Wrench
Installation Position: Upright or Pendent
Approval Type: Light Hazard Occupancy *+
3.
• U.S.Patent No.6,374,920
1 Sprinkler Type Deflector to Ceiling Distance T "
(Min.-Max.) ', -"_-�-"- "
------ ---- --- .--� - lid-
I Upright i 4 (102mm)-12"(305mm)
L Pendent 4"(102mm)- 12"(305mm)_
Installation Data: Vertical Sidewall
I I
1 Nominal K Factor 1 Sprinkler
1 Nominal I Thread Size , Sprinkler Approval f4 identification
Orifice ! Height Organizations
US Metric 9 9 Numbers(SIN)
I 'l2"(15mm) i 72"NPT(R1/2) i 5-6 8.0 [ 2.25"(57mm) 1,2,3 RA1385
LPC Approval is pendent only.57°C through 141°C ratings.
1 Model F156 Horizontal Sidewall Sprinkler
Deflector:HSW v/ /s j
Installation Wrench:Model D Sprinkler Wrench % 1 I
FACE OF FITTING(1) y
TO FACE OF CEILING
DIMENSION - dm. 1 1/4" MIN.
2 1/4" HOLE DIA. (31.6mmJ
[57.2mm] [101.6mm—152.4mm]
• [3.2mm) CEILING TO
• 1" X 1/2" REDUCER DEFLECTOR
_
f r
it ma s--r1�
tun
7 15/16" DIA,l 1 El _I' IiiR
7 � _ � _ �N I
.e4' _ k r49. m) ,�y III 2 27/32" DIA,
_: iJ [72.2mm)
L r_ � ,1 II I
TURN COLLAR UNTIL
TIGHT :it.' I
AGAINST
OSS.SPRINKLER `\\v
WRENCH
.01F-ADJUSTMENT(
)
013FG03
Horizontal Sidewall (7) REFER TO ESCUTCHEON DATA TABLE FOR APPROVALS AND DIMENSIONS.
Note:For Recessed HSW Sprinklers use installation wrench GFR2. J
installation Data:Horizontal Sidewall
Nominal K Factor Sprinkler
Hei ht Approval Organizations Sprinkler
Nominal Orifice Thread Size I 9 Identification
US Metric Light Hazard 1 Ordinary Numbers(SIN) I
Hazard i
— -
I %,"(15mm) L iz"NPT(R1/) i 5.6 80 2.63"(67mm) j 1,2 1 t RA1335 ;
3.
Model F156 & F156 Recessed Sprinklers Maintenance
Application The Models F156 and F156 Recessed Sprinklers should be
Model F156 and F156 Recessed sprinklers are used in fixed inspected quarterly and the sprinkler system maintained in
• fire protection systems: Wet, Dry, Deluge or Preaction. Care accordance with NFPA 25. Do not clean sprinklers with soap
must exercised that the orifice size,temperature rating,deflector and water, ammonia or any other cleaning fluid. Remove any
style and sprinkler type are in accordance with the latest pub- sprinkler which has been painted (other than factory applied)
▪ fished standards of the National Fire Protection Association or or damaged in any way. A stock of spare sprinklers should be
the approving Authority Having Jurisdiction Installation. maintained to allow quick replacement of damaged or operated
Installation sprinklers. Prior to installation,sprinklers should be maintained
Model F156 Series sprinklers are standard response sprinklers in the original cartons and packaging until used to minimize the
intended for installation as specified in NFPA 13.They must also potential for damage to sprinklers that would cause improper
be installed with the Model D Sprinkler Wrench specifically de- operation or non-operation.
signed by Reliable for use with these sprinklers. Temperature Ratings
The Model F156 Recessed Sprinklers are to be installed with a T sprinkler
maximum recess of 34 inch(19mm).The Model F1,F2,and FP Classification Tempenat�F .; NtaTeemp 1e"t Colobr •
Escutcheon illustrated are the only recessed escutcheon to be s Ordinary 57 135 100°F(38°C) Orange
used with the Model F156 Recessed Sprinklers.The use of any Ordinary ; 68 I 155 100°F(38°C) Red
other recessed escutcheon will void all approvals and negate . intermediate 79 i 175 150°F(66°C) . Yellow
all warranties.When installing Model F156 Recessed Sprinklers Intermediate 93 200 ; 150°F(ss°C) Green
use the Model GFR2 Sprinkler Wrench.Any other type of wrench High 141 286 225°F{107°C) 81ue
._E, raHiah,_ 182 .' f 3�F(14_9_Ci i Maw
may damage these sprinklers, Not available for recessed Sprinklers.
Note:A leak tight'-` NPT(R1/2)sprinkler pint can be obtained with a torque
of8-18ft-Ibs(16.8-24.4N-m). Do not tighten sprinklers over maximum recom- Maximum Working Pressure
mended torque. It may cause leakage or impairment of the sprinklers.
Glass bulb sprinklers have orange covers to protect the bulb 100 psi (% Facttory tested hydrostatically to 500 psi(34.5 bar)
bar)
1
during the installation process. REMOVE THIS PROTECTION
ONLY AFTER THE SYSTEM HAS BEEN HYDROSTATICALLY Finish(I)TESTED AND, WHEN APPLICABLE, THE ESCUTCHEONS - Standard Finishes
HAVE BEEN INSTALLED. RASCO wrenches are designed to sprinkler escutcheon
install sprinklers when covers are in place. I Bronze Brass
Ordering Information : Chrome Chrome
_e_oiymtel�oatgd= -- --- White�inted
Specify: -- Soectal Application Finishes .-
1. Sprinkler Model _^sprinkler Escuttitreon
• P Bright Brass Bright Brass
2. Sprinkler Type Black Plated Black Plated
3. Orifice Size Black Paint II Black Paint
• 4. Deflector Type Off White'13 Off White
5. Temperature Rating: satin Chrome Satin Chrome
Lead Plated i
- Specify when ordering Wax Coated
- Model F156 Pendent Sprinkler W_xOver Lea '
6. Sprinkler Finish Other colas and finishes are available on special order.Corsuft factory for
7. Escutcheon Finish (where applicable) details.
Note:When Model F15bb Recessed Sprinklers are ordered, the sprin- 'Co20 and ULC)i maximum.
.
klers and escutcheons are packaged separately.
''155°F
200listed only.
155°F to 200`F(68°C to 93`C)ratings only.
Escutcheon Data(') ''286°F(141°C)sprinklers may be coated for ambient conditini Is not exceeding
Face of Fitting to 150'F(68°C).
Escutcheon.Approvals Adjustment i, Dime sion Ceiling or Wall °cULus listed'corrosion resistant"applies to SIN Number RA1325(Upright)
, - _;_ Dimension and RA1314(Pendent)in standard black or while.
Ft 1.3E Max Recessed,1'/_ (38.1mm) I,_'`/-" -FMApprovedfinishas"Polyester Coated"applies only to SIN numberRA1314
. _._l_Mit Regessed I /•"�191rpui (Sm-24mm.L.__ (Pendent)in standard black or white.
F2 1.2.34 MaxRecessed1/ (38.1mm) '/'r'-"/'a" FM Approved finish applies only to SIN number RA1 .35&RA1385.
'--- , _Min Recessed' 1-(25mm)i (5m-17rtnmL..:
I FP Push-on/: Max Recessed! '/+s"(11mm) 1'/='(38.1mm)
Thread-off 1.4 Min Recessed i_G_S24mm) i (25mm)
SIN:RA1't't5-cULus and FM permits use with F1 or F2 escutcheons for light
hazard only.
The equipment presented in this bulletin is to be installed in accordance with the latest published Standards of the National Fire Protection Association,Factory
Mutual Research Corporation,or other similar organizations and also with the provisions of governmental codes or ordinances whenever applicable.
Productsmanufactured and distributed by Reliable have been protecting life and properly for over 90 years,and are installed and serviced by the most highly
qualified and reputable sprinkler contractors located throughout the United Slates,Canada and foreign countries.
Manufactured by
The Reliable Automatic Sprinkler Co.,Inc. Recycled
IFIellable
(800)841-105 Sales Officesrap<r
(800)848-6051292 Sales Fax Revision lines indicate updated or new data
(914)829-2042 Corporate Offices
www.reliablesprinkler_com Internet Address FG Printed in us_r,12/10 PIN estteiazee